Load profile and fluid composition influence the soak behavior of UHMWPE implants

ASTM Special Technical Publication

Volumn 1472 STP, Issue , 2007, Pages 97-101

  Schwenke, Thorsten ^a   Schneider, Erich ^b   Wimmer, Markus A ^a  

^a RUSH UNIVERSITY MEDICAL CENTER   (United States)

^b AO RESEARCH INSTITUTE   (Switzerland)

Author keywords

Fluid absorption; Joint simulator; Soak control; Test lubricant; Wear

Indexed keywords

ABSORPTION; DOPING (ADDITIVES); HIP PROSTHESES; JOINT PROSTHESES; LOAD TESTING; LUBRICATION; OFFSHORE OIL WELL PRODUCTION; POLYETHYLENES; STANDARDS; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEIGHT CONTROL; WELL TESTING;

APPLIED LOADS; ARTICULATING SURFACES; BOVINE SERUM; CERAMIC HIP; DISTILLED WATER; FLUID ABSORPTION; FLUID COMPOSITION; IN-VIVO; JOINT SIMULATION; JOINT SIMULATOR; LOAD PROFILING; LUBRICATION CONDITIONS; NO LOAD; SOAK CONTROL; TEST LUBRICANT; TOTAL JOINT REPLACEMENTS; ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE; WEAR; WEAR TESTING; WEIGHT GAINS;

NONMETALLIC MATRIX COMPOSITES;

EID: 51649119350     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (24)

1. Yao, J. Q., Laurent, M. P., Johnson, T. S., Blanchard, C. R., and Crowninshield, R. D., "The Influences of Lubricant and Material on Polymer/CoCr Sliding Friction," in Trans Wear of Materials, 2003, Washington, DC.
2. Good, V. D., Clarke, I. C., and Anissian, L., "Water and Bovine Serum Lubrication Compared in Simulator PTFE/CoCr Wear Model," J. Biomed. Mater. Res., Vol. 33, No. 4, 1996, pp. 275-283.
3. McKellop, H., Clarke, I. C., Markolf, K. L., and Amstutz, H. C., "Wear Characteristics of UHMW Polyethylene: A Method for Accurately Measuring Extremely Low Wear Rates," J. Biomed. Mater. Res., Vol. 12, No. 6, 1978, pp. 895-927.
4. Clarke, I. C., Starkebaum, W., Hosseinian, A., McGuire, P., Okuda, R., Salovey, R., and Young, R., "Fluid-Sorption Phenomena in Sterilized Polyethylene Acetabular Prostheses," Biomaterials, Vol. 6, No. 3, 1985, pp. 184-188.
5. Good, V. D., Clarke, I. C., Gustafson, G. A., Downs, B., Anissian, L., and Sorensen, K., "Wear of Ultra-High Molecular Weight Polyethylene and Polytetrafluoroethylene in a Hip Simulator: A Dose-response Study of Protein Concentration," Acta Orthop. Scand., Vol. 71, No, 4, 2000, pp. 365-369.
6. Bell, J., Besong, A. A., Tipper, J. L., Ingham, E., Wroblewski, B. M., Stone, M. H., and Fisher, J., "Influence of Gelatin and Bovine Serum Lubricants on Ultra-High Molecular Weight Polyethylene Wear Debris Generated in In Vitro Simulations," Proc. Inst. Mech. Eng., Part H: J. Eng. Med. Vol. 214, No. 5, 2000 pp. 513-518.
7. Besong, A. A., Tipper, J. L., Mathews, B. J., Ingham, E., Stone, M. H., and Fisher, J., "The Influence of Lubricant on the Morphology of Ultra-High Molecular Weight Polyethylene Wear Debris Generated in Laboratory Tests," Proc. Inst. Mech. Eng., Part H: J. Eng. Med. Vol. 213, No. 2, 1999, pp. 155-158.
8. Liao, Y-S, McNulty, D., and Hanes, M., "Wear Rate and Surface Morphology of UHMWPE Cups are Affected by the Serum Lubricant Concentration in a Hip Simulator Test," Trans Wear of Materials, 2003, Washington, DC.
9. Scales, J. T., and Winter, G. D., "Clinical Consideration in the Choice of Materials for Orthopedic Internal Prostheses," J. Biomed. Mater. Res., Vol. 9, No. 4, 1975, pp. 167-176.
10. Clarke, I. C., Chan, F. W., Eisner, A., Good, V., Kaddick, C., Lappalainen, R., Laurent, M., McKellop, H., McGarry, W., and Schroeder, D., "Multi-Laboratory Simulator Studies on Effects of Serum Proteins on PTFE Cup Wear," Wear, Vol. 250, No. 1-12, 2001, pp. 188-198.
11. Tanner, S., DesJardins, J., Pace, T. B., Winbrenner, D., LaBerge, M., "Development of a Clinically Relevant TKR Simulation Test Lubricant," Trans Soc. Biomat., 29th Annual Meeting, 2003. Reno, NV.
12. Wang, A., Polineni, V. K., Essner, A., Stark, C., and Dumbleton, J. H., "Role of Proteins and Hylauronic Acid in the Lubrication and Wear of UHMWPE Acetabular Cups," Trans Soc. Biomat., 24th Annual Meeting, 1998, San Diego, CA.
13. Wang, A., Schmidig, G., Essner, A., and Serekian, P., "Effect of Lubricant Protein Composition On The Outcome Of Hip Joint Simulator Testing," Trans Orthopaedic Research Society, 46th Annual Meeting, 2000, Orlando, FL.
14. Yao, J. Q., Laurent, M. P., Gilbertson, L. N., Blanchard, C. R., Crowninshield, R. D., and Jacobs, J. J., "A Comparison of Biological Lubricants to Bovine Calf Serum for Total Joint Wear Testing," Trans Orthopaedic Research Society, 48th Annual Meeting, 2002, Dallas, TX.
15. Noordin, S., Schmalzried, T. P., Campbell, P., and Amstutz, H. C., "Synovial Fluid From Patients With Prosthetic Joint Arthroplasty: Protein Concentration and In Vivo Wear of Polyethylene," Trans Orthopaedic Research Society, 43rd Annual Meeting, 1997, San Francisco, CA.
16. Shen, M., Norris, J., and Rieker, J., "Serum Effect on Wear of UHMWPE Tibial Insert in Knee Simulator Testing," Trans Society for Biomaterials, 29th Annual Meeting, 2003, Reno, NV
17. Streicher, R. M., Semlitsch, M., Schon, R., Weber, H., and Rieker, C., "Metal-On-Metal Articulation for Artificial Hip Joints: Laboratory Study and Clinical Results," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 210, No. 3, 1996, pp. 223-232.
18. McKellop, H., Lu, B., and Benya, P., "Friction, Lubrication and Wear of Cobalt-Chromium, Alumina and Zirconia Hip Prostheses on s Joint Simulator," Trans World Biomaterials Congress, 1992, Berlin, Germany.
19. Schwenke, T., Kaddick, C., Schneider, E., and Wimmer, M. A., "Fluid Composition Impacts Standardized Testing Protocols in Ultra-High Molecular Weight Polyethylene Knee Wear Testing," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 219, 2005, pp. 457-464.
20. Nassutt, R., Wimmer, M. A., Schneider, E., and Morlock, M. M., "The Influence of Resting Periods on Friction in the Artificial Hip," Clin. Orthop., Vol. 407, 2003, pp. 127-138.
21. ISO 14242, "Implants for Surgery - Wear of Total Hip-Joint Prostheses," International Standard, 2001, Geneva, Switzerland.
22. ISO 14243, "Implants for Surgery - Wear of Total Knee-Joint Prostheses," International Standard, 2004, Geneva, Switzerland.
23. Rieker, C. B., Schoen, R., Liebentritt, G., Gnepf, P., Desjardins, J., and LaBerge, M., "The Influence of Mobile Bearing Knee Prostheses Kinematics on Their Wear Behavior," Trans World Biomaterials Congress, 2004, Vol. 1129, Sydney, Australia.
24. Muratoglu, O. K., Bragdon, C. R., O'Connor, D. O., Jasty, M., and Harris, W. H., "A Novel Method of Cross-Linking Ultra-High-Molecular-Weight Polyethylene to Improve Wear, Reduce Oxidation, and Retain Mechanical Properties. Recipient of the 1999 HAP Paul Award," J. Arthroplasty, Vol. 16, No. 2, 2001, pp. 149-160.