Fluid composition impacts standardized testing protocols in ultrahigh molecular weight polyethylene knee wear testing

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 219, Issue 6, 2005, Pages 457-464

  Schwenke, Thorsten ^a   Kaddick, C ^b   Schneider, E ^c   Wimmer, M A ^a  

^a RUSH UNIVERSITY MEDICAL CENTER   (United States)

^b EndoLab Mechanical Engineering GmbH   (Germany)

^c AO RESEARCH INSTITUTE   (Switzerland)

Author keywords

Fluid absorption; Knee simulator; Testing serum; Wear

Indexed keywords

ADDITIVES; ADSORPTION; BONE; COMPOSITION; IMPLANTS (SURGICAL); LUBRICANTS; LUBRICATION; MECHANICAL TESTING; PROTEINS; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WATER; WEAR OF MATERIALS; ARTIFICIAL LIMBS; BODY FLUIDS; DEIONIZED WATER; JOINT PROSTHESES; JOINTS (ANATOMY); LOAD TESTING; MOLECULAR WEIGHT; POLYETHYLENES; SIMULATORS; TESTING;

FLUID ADSORPTION; KNEE SIMULATOR; TESTING SERUM; TOTAL KNEE REPLACEMENT; WEAR TESTING;

JOINT PROSTHESES; KNEE PROSTHESES;

FLUID ABSORPTION; KNEE SIMULATORS; LUBRICATION CONDITION; MASS CONCENTRATION; STANDARDIZED TESTING PROTOCOLS; TESTING CONDITIONS; TESTING SERUM; TOTAL KNEE REPLACEMENT;

POLYETHYLENE DERIVATIVE; ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE;

ARTICLE; BODY FLUID; CHEMISTRY; EQUIPMENT; HUMAN; INTERNATIONAL COOPERATION; KNEE; KNEE PROSTHESIS; MATERIALS TESTING; METHODOLOGY; MICROFLUIDICS; PATHOPHYSIOLOGY; PRACTICE GUIDELINE; REPRODUCIBILITY; SENSITIVITY AND SPECIFICITY; STANDARD; SYNOVIAL FLUID;

BODY FLUIDS; EQUIPMENT FAILURE ANALYSIS; GUIDELINES; HUMANS; INTERNATIONALITY; KNEE; KNEE PROSTHESIS; MATERIALS TESTING; MICROFLUIDICS; POLYETHYLENES; REFERENCE STANDARDS; REPRODUCIBILITY OF RESULTS; SENSITIVITY AND SPECIFICITY; SYNOVIAL FLUID;

EID: 27744569751     PISSN: 09544119     EISSN: 09544119     Source Type: Journal    
DOI: 10.1243/095441105X34392     Document Type: Article

References (26)

1. Charnley, J. and Halley, D. Rate of wear in total hip replacement. Clin. Orthop. Related Res., 1975, 112, 170-179.
2. Good, V. D., Clarke, I. C., and Anissian, L. Water and bovine serum lubrication compared in simulator PTFE/CoCr wear model. J. Biomed. Mater. Res., 1996, 33(4), 275-283.
3. McKellop, H., Clarke, I. C., Markolf, K. L., and Amstutz, H. C. Wear characteristics of UHMW polyethylene: a method for accurately measuring extremely low wear rates. J. Biomed. Mater. Res., 1978, 12(6), 895-927.
4. Clarke, I. C., Starkebaum, W., Hosseinian, A., McGuire, P., Okuda, R., Salovey, R., and Young, R. Fluid-sorption phenomena in sterilized polyethylene acetabular prostheses. Biomaterials, 1985, 6(3), 184-188.
5. Yao, J. Q., Laurent, M. P., Johnson, T. S., Blanchard, C. R., and Crowninshield, R. D. The influences of lubricant and material on polymer/ CoCr sliding friction. Wear, 2003, 255(1-6), 780-784.
6. Good, V. D., Clarke, I. C., Gustafson, G. A., Downs, B., Anissian, L., and Sorensen, K. Wear of ultra-high molecular weight polyethylene and polytetra-fluoroethylene in a hip simulator: a dose-response study of protein concentration. Acta Orthop. Scand., 2000, 71(4), 365-369.
7. Bell, J., Besong, A. A., Tipper, J. L., Ingham, E., Wroblewski, B. M., Stone, M. H., and Fisher, J. Influence of gelatin and bovine serum lubricants on ultra-high molecular weight polyethylene wear debris generated in in vitro simulations. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine. 2000,214(5), 513-518.
8. Besong, A. A., Tipper, J. L., Mathews, B. J., Ingham, E., Stone, M. H., and Fisher, J. The influence of lubricant on the morphology of ultra-high molecular weight polyethylene wear debris generated in laboratory tests. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213 (2), 155-158.
9. Liao, Y.-S., McNulty, D., and Hanes, M. Wear rate and surface morphology of UHMWPE cups are affected by the serum lubricant concentration in a hip simulator test. Wear, 2003, 255(7-12), 1051-1056.
10. Scales, J. T. and Winter, G. D. Clinical considerations in the choice of materials for orthopedic internal prostheses. J. Biomed. Mater. Res., 1975, 9(4), 167-176.
11. Clarke, I. C., Chan, F. W., Essner, A., Good, V., Kaddick, C., Lappalainen, R., Laurent, M., McKellop, H., McGarry, W., and Schroeder, D. Multi-laboratory simulator studies on effects of serum proteins on PTFE cup wear. Wear, 2001, 250(1-12), 188-198.
12. Tanner, S., DesJardins, J., Pace, T. B., Winbrenner, D., and LaBerge, M. Development of a clinically relevant TKR simulation test lubricant. In Transactions of the Society for Biomaterials 29th Annual Meeting, Reno, Nevada, USA, 2003, 108.
13. Wang, A., Polineni, V. K., Essner, A., Stark, C., and Dumbleton, J. H. Role of proteins and hylauronic acid in the lubrication and wear of UHMWPE acetabular cups. In Transactions of the Society for Biomaterials 24th Annual Meeting, San Diego, California, USA, 1998, 218.
14. Wang, A., Schmidig, G., Essner, A., and Serekian, P. Effect of lubricant protein composition on the outcome of hip joint simulator testing. In Transactions of the 46th Annual Meeting of the Orthopaedic Research Society, Orlando, Florida, USA, 2000, 27.
15. Yao, J. Q., Laurent, M. P., Gilbertson, L. N., Blanchard, C. R., Crowninshield, R. D., and Jacobs, J. J. A comparison of biological lubricants to bovine calf serum for total joint wear testing. In Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, Texas, USA, 2002, 1004.
16. Noordin, S., Schmalzried, T. P., Campbell, P., and Amstutz, H. C. Synovial fluid from patients with prosthetic joint arthroplasty: Protein concentradon and in vivo wear of polyethylene. In Transactions of the 43rd Annual Meeting of the Orthopaedic Research Society, San Francisco, California, USA, 1997,769.
17. Shen, M., Norris, J., and Rieker, J. Serum effect on wear of UHMWPE tibial insert in knee simulator testing. In Transactions of the Society for Biomaterials 29th Annual Meeting, Reno, Nevada, USA, 2003,41.
18. Streicher, R. M., Semlitsch, M., Schon, R., Weber, H., and Rieker, C. Metal-on-metal articulation for artificial hip joints: laboratory study and clinical results. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210(3), 223-232.
19. McKellop, H., Lu, B., and Benya, P. Friction, lubrication and wear of cobalt-chromium, alumina and zirconia hip prostheses on a joint simulator. In Transactions of the World of Biomaterials, Berlin, Germany, 1992.
20. Walker, P. S., Blunn, G. W., Perry, J. P, Bell, C. J., Sathasivam, S., Andriacchi, T. P., Paul, J. P, Haider, H., and Campbell, P. A. Methodology for long-term wear testing of total knee replacements. Clin. Orthop., 2000, 372, 290-301.
21. ISO 14243-1 Implants for surgery - wear of total knee-joint prostheses, Part 1: loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test, 2002 (International Standardization Organization, Geneva).
22. ASTM F1715-00 Standard guide for wear assessment of prosthetic knee designs in simulator devices, 2000 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
23. Kaddick, C. and Wimmer, M. A. Hip simulator wear testing according to the newly introduced standard ISO 14242, Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215(5), 429-442.
24. Walker, P S., Blunn, G. W., Broome, D. R., Perry, J., Watkins, A., Sathasivam, S., Dewar, M. E., and Paul, J. P. A knee simulation machine for performance evaluation of total knee replacements. J. Biomechanics, 1997, 30(1), 83-89.
25. Kurtz, S. M., Rimnac, C. M., Hozack, W. J., Turner, J., Marcolongo, M., Goldberg, V. M., Kraay, M. J., and Edidin, A. A. In vivo degradation of polyethylene liners after gamma sterilization in air. J. Bone Jt Surg,., 2005, 87A, 815-823.
26. Muratoglu, O. K., Merrill, E. W., Bragdon, C. R., O'Connor, D., Hoeffel, D., Burroughs, B., Jasty, M., and Harris, W. H. Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene. Clin. Orthop., 2003, 417, 253-262.