The fracture toughness of niobium-based, in situ composites

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 9, 1996, Pages 2518-2531

  Chan, Kwai S ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MATERIALS; DEFORMATION; DUCTILITY; FRACTOGRAPHY; FRACTURE; FRACTURE TOUGHNESS; MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE; PLASTIC FLOW; SOLID SOLUTIONS; TOUGHENING;

CLEAVAGE; FRACTURE RESISTANCE; IN SITU COMPOSITES; NEAR TIP MEASUREMENT TECHNIQUES; RESISTANCE CURVE BEHAVIOR; SLIP BAND DECOHESION;

NIOBIUM ALLOYS;

EID: 0030247808     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02652346     Document Type: Article

References (44)

1. D.M. Dimiduk and D.B. Miracle: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1988, vol. 130, pp. 349-59.
2. R.M. Nekkanti and D.M. Dimiduk: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1990, vol. 194, pp. 175-82.
3. M.G. Mendiratta, J.J. Lewandowski, and D.M. Dimiduk: Metall. Trans. A, 1991, vol. 22A, pp. 1573-83.
4. M.G. Mendiratta and D.M. Dimiduk: Metall. Trans. A, 1993, vol. 24A, pp. 501-04.
5. J.D. Rigney, P.M. Singh, and J.J. Lewandowski: JOM, 1992, vol. 44 (8), pp. 36-41.
6. J. Kajuch, J. Short, and J.J. Lewandowski: Ada Metall. Mater., 1995, vol. 43, pp. 1955-67.
7. D.L. Anton and D.M. Shah: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1990, vol. 194, pp. 45-52.
8. D.L. Davidson, K.S. Chan, and D.L. Anton: AFOSR Annual Report No. 06-4915/3, Southwest Research Institute, San Antonio, TX, 1994.
9. D.L. Davidson, K.S. Chan, and D.L. Anton: Metall. Mater. Trans. A., 1996, vol. 27A, accepted for publication.
10. M. Takeyama and C.T. Liu: Mater. Sei. Eng., 1991, vol. A132, pp. 61-66.
11. R.L. Fleischer and R.J. Zabala: Metall. Trans. A., 1990, vol. 21 A, pp. 2149-54.
12. D.L. Davidson and D.L. Anton: Materials Research Society Symposia Proceeding, Materials Research Society, Pittsburgh, PA, 1992, vol. 288, pp. 807-13.
13. D.L. Guan, P.K. Liaw, C.T. Liu, and E.W. Lee: Proc. James Li Symp., S.N.G. Chu, P.K. Liaw, RJ. Arsenault, K. Sadananda, K.S. Chan, W.W. Gerberich, C.C. Chau, and T.M. Kung, eds., TMS, Warrendale, PA, 1995, p. 553.
14. C.K. Elliott, G.R. Odette, G.E. Lucas, and J.W. Sheckherd: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1988, vol. 120, pp. 95-101.
15. G.R. Odette, B.L. Chao, J.W. Sheckherd, and G.E. Lucas: Acta Metall. Mater., 1992, vol. 40, pp. 2381-89.
16. K.T. Venkateswara Rao, G.R. Odette, and R.O. Ritchic: Acta Metall. Mater., 1992, vol. 42, pp. 893-911.
17. J.A. Cook, P.K. Liaw, and C.T. Liu: Proc. Symp. on Fatigue and Fracture of Ordered Intermetallics Materials II, TMS, Warrendale, PA, 1995, pp. 155-166.
18. D.J. Thoma: Ph.D. Dissertation, University of Wisconsin, Madison, WI, University Microfilms, Ann Arbor, MI, 1992.
19. G.E. Vignoul, J.M. Sanchez, and J.K. Tien: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1991, vol. 213, pp. 739-744.
20. D.L. Anton and D.M. Shah: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1991, vol. 213, pp. 733-38.
21. D.M. Shah and D.L. Anton: Mater. Sei. Eng., 1992, vol. A153, pp. 402-09.
22. D.L. Anton and D.M. Shah: Mater. Sei. Eng., 1992, vol. A153, pp. 410-15.
23. K.S. Chan: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1994, vol. 364, pp. 469-80.
24. D.M. Dimiduk, M. Mendiratta, and P.R. Subramanian: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds. TMS, Warrendale, PA, 1993, pp. 619-30.
25. A. Nagy, J.B. Campbell, and D.L. Davidson: Rev. Sei. Instmm., 1984, vol. 55, pp. 778-82.
26. E.A. Franke, D.J. Wenzel, and D.L. Davidson: Rev. Sei. Instnim., 1990, vol. 62 (5), pp. 1270-79.
27. J.W. Christian: in Proc. 2nd Int. Conf. on the Strength of Metals and Alloys, ASM, Metals Park, OH, 1970, vol. 1, pp. 31-70.
28. G. Taylor, D. Vesely, and J.W. Christian: in The Microstructure and Design of Alloys, Institute of Metals and Iron and Steel Institute, London, 1973, vol. 1, pp. 1-5.
29. D.F. Stein, C.P.W. Chen, and R.A. Ayres: in Tlie Inhomogeneity of Plastic Deformation, ASM, Metals Park, OH, 1973, pp. 55-82.
30. K.S. Chan: Proc. James Li Symp., S.N.G. Chu, P.K. Liaw, R.J. Arsenault, K. Sadananda, K.S. Chan, W.W. Gerberich, C.C. Chau, and T.M. Kung, eds., TMS, Warrendale, PA, 1995, pp. 113-20.
31. B. Cotterrell and J.R. Rice: Int. J. Fract., 1980, vol. 16, pp. 155-69.
32. A.N. Stroh: Proc. R. Soc. A, 1955, vol. 232, pp. 548-61.
33. C.D. Statham, D.A. Koss, and J.W. Christian: Phil. Mag., 1972, vol. 26, pp. 1089-1103.
34. A.F. Bowen and M. Ortiz: J. Mech. Phys. Solids, 1991, vol. 39, pp. 815-58.
35. K.S. Chan: Metall. Trans. A, 1992, vol. 23A, pp. 183-99.
36. S. Suresh and A. Needleman: in Damage Mechanics in Composites, AMD vol. 150, ASME Applied Mechanics Division, ASME, NY, 1992, pp. 191-94.
37. B.P. Somerday and R.P. Gangloff: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1471-1479.
38. V. Tvergaird: Int. J. Mech. Sci., 1992, vol. 34, pp. 635-49.
39. M.F. Ashby, F.J. Blunt, and M. Bannister: Ada Metall, 1989, vol. 37, pp. 1847-57.
40. M.G. Mendiratta, R. Goetz, D.M. Dimiduk, and J. Lewandowski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1767-76.
41. L. Xiao and R. Abbaschian: Metall. Trans. A, 1993, vol. 24A, pp. 40315.
42. M.Y. He, F.E. Heredia, D.J. Wissuchek, M.C. Shaw, and A.G. Evans: Ada Metall. Mater., 1993, vol. 41, pp. 1223-28.
43. M.C. Shaw, D.B. Marshall, M.S. Dadkhah, and A.G. Evans: Acta Metall. Mater., 1993, vol. 41, pp. 3311-22.
44. K.S. Chan: Metall. Trans. A, 1993, vol. 24A, pp. 569-83.