Developments in polymerization lamps

Quintessence International

Volumn 39, Issue 2, 2008, Pages e74-e84

  Jiménez Planas, Amparo ^a   Martín, Juan ^a   Ábalos, Camilo ^a   Llamas, Rafael ^a  

^a UNIVERSITY OF SEVILLE   (Spain)

Author keywords

Curing units; Diodes; Halogen; Laser; Light; Plasma; Pulse delay; Soft start

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; POLYMER; RESIN;

CHEMISTRY; ELECTRONICS; EQUIPMENT DESIGN; HUMAN; ILLUMINATION; INSTRUMENTATION; RADIATION EXPOSURE; REVIEW;

COMPOSITE RESINS; DENTAL MATERIALS; ELECTRONICS; EQUIPMENT DESIGN; HUMANS; LIGHTING; POLYMERS;

EID: 49849095878     PISSN: 00336572     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (85)

1. Katona TR, Winkler MM, Huang J. Stress analysis of a bulk-filled Class-V chemical-cured dental composite restoration. J Biomed Mater Res 1996;31:445-449.
2. Blankenau R, Erickson RL, Rueggeberg F. New light curing options for composite resin restorations. Compend Contin Educ Dent 1999;20:122-125, 129, 131 passim.
3. Burke FJ, Earp DP, Farrell S. Effectiveness of light-curing units. Br Dent J 1996;181:283-287.
4. Davidson CL, de Gee AJ. Light-curing units, polymerization, and clinical implications. J Adhes Dent 2000;2:167-173.
5. Rueggeberg F. Contemporary issues in photocuring. Compend Contin Educ Dent Suppl 1999;(25):S4-15.
6. Abate PF, Zahra VN, Macchi RL. Effect of photopolymerization variables on composite hardness. J Prosthet Dent 2001;86:632-635.
7. Hofmann N, Hiltl O, Hugo B, Klaiber B. Guidance of shrinkage vectors vs irradiation at reduced intensity for improving marginal seal of class V resin-based composite restorations in vitro. Oper Dent 2002; 27:510-515.
8. Sakaguchi RL, Ferracane JL. Effect of light power density on development of elastic modulus of a model light-activated composite during polymerization. J Esthet Restor Dent 2001;13:121-130.
9. Yap AU, Seneviratne C. Influence of the light energy density on effectiveness of composite cure. Oper Dent 2001;26:460-466.
10. Losche GM.Marginal adaptation of Class II composite fillings: Guided polymerization vs reduced light intensity. J Adhes Dent 1999;1:31-39.
11. Caughman WF, Rueggeberg FA. Shedding new light on composite polymerization. Oper Dent 2002;27:636-638.
12. The Cochrane Collaboration Website. Available at http://www.cochrane.org/index.htm
13. Lapides DN. Diccionario de términos científicos y técnicos. Marcombo SA (Boixareu Editors), Barcelona-México, 1981.
14. Nomoto R. Effect of light wavelength on polymerization of light-cured resins. Dent Mater J 1997;16 60-73.
15. Park YJ, Chae KH, Rawls HR. Development of a new photoinitiation system for dental light-cure composite resins.Dent Mater 1999;15:120-127.
16. Suh BI. Controlling and understanding the polymerization shrinkage-induced stresses in light-cure composite. Compend Contin Educ Dent 1999;(25):S34-41.
17. Meniga A, Tarle Z, Ristic M, Sutalo J, Pilcher G.Pulsed blue laser curing of hybrid composite resins. Biomaterials 1997;18:1349-1354.
18. Park SH, Krejci I, Lutz F.Microhardness of resin composites polymerized by plasma arc or conventional visible light curing. Oper Dent 2002;27:30-37.
19. Millar BJ, Nicholson JW. Effect of curing with a plasma light on the properties of polymerizable dental restorative materials. J Oral Rehabil 2001;28:549-552.
20. Fano L, Ma WY, Marcoli PA, Pizzi S, Fano V. Polymerization of dental composite resins using plasma light. Biomaterials 2002;23:1011-1015.
21. Knezevic A, Tarle Z, Meniga A, Sutalo J, Pichler G, Ristic M. Photopolymerization of composite resins with plasma light. J Oral Rehabil 2002;29:782-786.
22. Dunn WJ, Taloumis LJ. Polymerization of orthodontic resin cement with light-emitting diode curing units. Am J Orthod Dentofacial Orthop 2002;122:236-241.
23. Ishikawa H, Komon A, Kojima I, Ando F. Orthodontic bracket bonding with a plasma-arc light and resinreinforced glass ionomer cement. Am J Orthod Dentofacial Orthop 2001;120:58-63.
24. Sfondrini MF, Cacciafesta V, Klersy C. Halogen versus high-intensity light-curing of uncoated and precoated brackets: A shear bond strength study. J Orthod 2002;29:45-50.
25. Sfondrini MF, Cacciafesta V, Pistorio A, Sfondrini G. Effects of conventional and high-intensity light-curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer. Am J Orthod Dentofacial Orthop 2001;119:30-35.
26. Fleming MG, Maillet WA. Photopolymerization of composite resin using the argon laser. J Can Dent Assoc 1999;65:447-450.
27. Tarle Z, Meniga A, Ristic M, Sutalo J, Pichler G. Polymerization of composites using pulsed laser. Eur J Oral Sci 1995;103:394-398.
28. St Georges AJ, Swift EJ Jr, Thompson JY, Heymann HO.Curing light intensity effects on wear resistance of two resin composites. Oper Dent 2002;27:410-417.
29. Powell GL, Blankenau RJ. Laser curing of dental materials.Dent Clin North Am 2000;44:923-930.
30. Aw TC, Nicholls JI. Polymerization shrinkage of restorative resins using laser and visible light curing. J Clin Laser Med Surg 1997;15:137-141.
31. Westerman G, Hicks J, Flaitz C. Argon laser curing of fluoride-releasing pit and fissure sealant: In vitro caries development. ASDC J Dent Child 2000;67:385-390.
32. Hinoura K, Miyazaki M, Onose H. Influence of argon laser curing on resin bond strength. Am J Dent 1993;6:69-71.
33. Lalani N, Foley TF, Voth R, Banting D, Mamandras A. Polymerization with the argon laser: Curing time and shear bond strength. Angle Orthod 2000;70:28-33.
34. Powell GL, Blankenau RJ. Effects of argon laser curing on dentin shear bond strengths. J Clin Laser Med Surg 1996;14:111-113.
35. Jandt KD, Mills RW, Blackwell GB, Ashworth SH. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs).Dent Mater 2000;16:41-47.
36. Stahl F, Ashworth SH, Jandt KD, Mills RW. Light-emitting diode (LED) polymerisation of dental composites:Flexural properties and polymerisation potential. Biomaterials 2000;21:1379-1385.
37. Uhl A, Mills RW, Vowles RW, Jandt KD. Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies. J Biomed Mater Res 2002;63:729-738.
38. Yoon TH, Lee YK, Lim BS, Kim CW. Degree of polymerization of resin composites by different light sources. J Oral Rehabil 2002;29:1165-1173.
39. Mills RW, Jandt KD, Ashworth SH.Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J 1999;186:388-391.
40. Dunn WJ, Bush AC. A comparison of polymerization by light-emitting diode and halogen-based lightcuring units. J Am Dent Assoc 2002;133:335-341.
41. Kurachi C, Tuboy AM, Magalhaes DV, Bagnato VS. Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater 2001;17:309-315.
42. Leonard DL, Charlton DG, Roberts HW, Cohen ME. Polymerization efficiency of LED curing lights. J Esthet Restor Dent 2002;14:286-295.
43. Mills RW, Uhl A, Blackwell GB, Jandt KD. High power light emitting diode (LED) arrays versus halogen light polymerization of oral materials: Bracol hardness, compressive strength and radiometric properties. Biomaterials 2002;23:2955-2963.
44. Shortall AC, Harrington E. Temperature rise during polymerization of light-activated resin composites. J Oral Rehabil 1998;25:908-913.
45. Hannig M, Bott B. In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater 1991;15:275-281.
46. Loney RW, Price RB. Temperature transmission of high-output light-curing units through dentin. Oper Dent 2001;26:516-520.
47. Knezevic A, Tarle Z, Meniga A, Sutalo J, Pichler G, Ristic M.Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes. J Oral Rehabil 2001;28:586-591.
48. Cobb DS, Dederich DN, Gardner TV. In vitro temperature change at the dentin/pulpal interface by using conventional visible light versus argon laser. Lasers Surg Med 2000;26:386-397.
49. Powell GL, Anderson JR, Blankenau RJ. Laser and curing light induced in vitro pulpal temperature changes. J Clin Laser Med Surg 1999;17:3-5.
50. Halvorson RH, Erickson RL, Davidson CL. Energy dependent polymerization of resin-based composite. Dent Mater 2002;18:4663-4669.
51. Sakagachi RL, Berge HX. Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites. J Dent 1998;26:695-700.
52. Feilzer AJ, Doreen LH, de Gee AJ, Davidson CL. Influence of light intensity on polymerization shrinkage and integrity of restoration-cavity interface. Eur J Oral Sci 1995;103:322-326.
53. Marais JT, Dannheimer MF, Germishuys PJ, Borman JW. Depth of cure of light-cured composite resin with light-curing units of different intensity. J Dent Assoc S Afr 1997;52:403-407.
54. Unterbrink G, Muessner R. Influence of light intensity on two restorative systems. J Dent 1995;23:183-189.
55. Ferracane JL, Mitchem JC. Relationship between composite contraction stress and leakage in class V cavities.Am J Dent 2003;16:239-243.
56. Harris JS, Jacobsen PH, O'Doherty DM. The effect of curing light intensity and test temperature on the dynamic mechanical properties of two polymer composites. J Oral Rehabil 1999;26:635-639.
57. Davidson CL, De Gee AJ, Feilzer A. The competition between the composite-dentine bond strength and the polymerization contraction stress. J Dent Res 1984;63:1396-1399.
58. Feilzer A, De Gee AJ, Davidson CL.Setting stresses in composite for two different curing modes. Dent Mater 1993;9:2-5.
59. Bowen RL, Nemoto K, Raspon JE.Adhesive bonding of various materials to hard tooth tisues: Forces developing in composite materials during hardening. J Am Dent Assoc 1983;106:475-477.
60. Davidson CL, De Gee AJ. Relaxation of polymerization contraction stresses by flow in dental composite. J Dent Res 1984;63:146-148.
61. Powell GL, Blankenau RJ. Effects of argon laser curing on dentin shear bond strengths. J Clin Laser Med Surg 1996;14:111-113.
62. Braga RR, Ferracane JL.Contraction stress related to degree of conversion and reaction kinetics. J Dent Res 2002;81:114-118.
63. Kanca J 3rd, Suh BI.Pulse activation: Reducing resinbased composite contraction stresses at the enamel cavosurface margins. Am J Dent 1999;12:107-112.
64. Yap AU, Ng SC, Siow KS. Soft-start polymerization:Influence on effectiveness of cure and postgel shrinkage. Oper Dent 2001;26:260-266.
65. Yap AU, Soh MS, Siow KS. Post-gel shrinkage with pulse activation and soft-start polymerization.Oper Dent 2002;27:81-87.
66. Ernst CP, Kurschner R, Rippin G, Willershausen B. Stress reduction in resin-based composites cured with a two-step light-curing unit. Am J Dent 2000; 13:69-72.
67. Yoshikawa T, Burrow MF, Tagami J. The effects of bonding system and light curing method on reducing stress of different C-factor cavities. J Adhes Dent 2001;3:177-183.
68. Obici AC, Sinhoreti MA, de Goes MF, Consani S, Sobrinho LC. Effect of the photoactivation method on the polymerization shrinkage of restorative composite. Oper Dent 2002;27:192-198.
69. Sahafi A, Peutzfeldt A, Asmussen E. Soft-start polymerization and marginal gap formation in vitro.Am J Dent 2001;14:145-147.
70. Lim BS, Ferracane JL, Sakaguchi RL, Condon JR. Reduction of polymerization contraction stress for dental composite by two-step light-activation.Dent Mater 2002;18:436-444.
71. Suh BI, Feng L, Wang Y, Cripe C, Cincione F, de Rijk W. The effect of the pulse-delay cure technique on residual strain in composite.Compend Contin Educ Dent 1999;20(2 suppl):4-12.
72. Yoshikawa T, Burrow MF, Tagami J. A light curing method for improving marginal sealing and cavity wall adaptation of resin composite restorations. Dent Mater 2001;17:359-366.
73. Burgess JO, De Goes M, Walker R, Ripps AH. An evaluation of four light-curing units comparing soft and hard curing. Pract Periodontics Aesthet Dent 1999;11:125-132.
74. Asmussen E, Peutzfeldt A. Influence of pulse-delay curing on softening of polymer structures. J Dent Res 2001;80:1570-1573.
75. Versluis A, Douglas WH, Cross M, Sakaguchi RL.Does an incremental filling technique reduce polymerization shrinkage stresses? J Dent Res 1996;75:871-878.
76. Christensen RP, Palmer TM, Ploeger BJ, Yost MP.Resin polymerization problems: Are they caused by resin curing lights, resin formulations, or both? Compend Contin Educ Dent Suppl 1999;(25):S42-54.
77. Rueggeberg FA, Caughman WF. Factors affecting light transmission of single-use, plastic light-curing tips. Oper Dent 1998;23:179-184.
78. Lee S, Shiu CH, Boghosian A, Greener EH. Radiometric and spectroradiometric comparison of power output of five visible light-curing units. J Dent 1993;21:373-377.
79. Berry EA 3rd, Pitts DG, Francisco PR, Von der Lehr WN.An evaluation of lenses designed to block light emitted by light-curing units. J Am Dent Assoc 1986;112:70-72.
80. Cullen AP, Chou BR, Ahmedbhai N. Light-curing units and protective filters. J Can Dent Assoc 1986; 52:939-941.
81. Fan PL, Wozniak WT, McGill S, Moser JB, Stanford JW. Evaluation of light transmission characteristics of protective eyeglasses for visible light-curing units. J Am Dent Assoc 1986;113:770-772.
82. Katsuyama S, Maeda T, Ogata N, et al. Protection of the eyes from visible light radiation from light-curing units [in Japanese]. Shigaku 1986;74:422-429.
83. Ligh RQ. Ocular concerns with light-curing units. Hawaii Dent J 1986;17(5):31-32.
84. Martin FE. A survey of the efficiency of visible light curing units. J Dent 1998;26:239-243.
85. Abalos C, Martín J, Llamas R, Jimenez-Planas A. Factores que influyen en la intensidad producida por las lamparas de polimerizacion. RCOE 1999; 4(1):25-38.