Particle damage in hertzian contacts and life ratings of rolling bearings

Tribology Transactions

Volumn 51, Issue 4, 2008, Pages 428-445

  Gabelli, A ^a   Morales Espejel, G E ^a,b   Ioannides, E ^a,c  

^a SKF Group   (Netherlands)

^b UNIVERSITÉ DE LYON   (France)

^c IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Ehl, ehd, topography; Indentations; Life ratings; Oil contamination; Particle damage; Rolling bearings

Indexed keywords

EID: 48949120295     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402000802011752     Document Type: Article

References (67)

1. Weibull, W. (1939), "A Statistical Theory of the Strength of Materials," Proceedings of the Royal Swedish Institute For Engineering Research, 151, pp 4-45.
2. Lundberg,G. and Palmgren, A. (1947), "Dynamic Capacity of Rolling Bearings," Acta Polytechnica 7, Mech. Eng. Series 3, Stockholm.
3. Chiu, Y. P., Tallian, T. E., Mccool, J. I. and Martin, J. A. (1969), "A Mathematical Model of Spalling FatigueFailure in Rolling Contact," Trans. ASLE, 12, pp 4106-4116.
4. Chiu, Y. P., Tallian, T. E. and Mccool, J. I. (1971), "An Engineering Model of Spalling Fatigue Failure in Rolling Contact-The Subsurface Model," Wear, 17, pp 433-446.
5. Tallian, T. E. and Mccool, J. I. (1971), "An Engineering Model of Spalling Fatigue Failure in Rolling Contact-The Surface Model," Wear, 17, pp 447-461.
6. Tallian, T. E. (1971), "An Engineering Model of Spalling Fatigue Failure in Rolling Contact-Engineering Discussion And Illustrative Examples," Wear, 17, pp. 463-480.
7. Ioannides, E. and Harris, T. A. (1985), "A New Fatigue Life Model for Rolling Bearings," Trans. ASME, J. of Trib., 107, pp 367-378.
8. Ioannides, E., Berling, G. and Gabelli, A. (1999), "An Analytical Formulation for the Life of Rolling Bearings," Acta Polytechnica Scandinavica, Mech. Eng. Series, 137.
9. Lorösch, H. K. (1982), "Influence of Load on the Magnitude of the Life Exponent for Rolling Bearings," in Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J.J.C. Hoo, Ed., ASTM, pp 275-292.
10. Voskamp, A. P. (1985), "Material Response to Rolling Contact Loading," Journal of Tribology, 107, pp 359-366.
11. Furumura, K., Murakami, Y. and Abe, T. (1996), "Development of Long Life Bearing Steels for Full Film Lubrication and for Poor and Contaminated Lubrication," NSK Publication, Motion & Control, 1, pp 30-36.
12. Moyar, A. C. (1991), "The Status And Future of Roller Bearing Life Prediction," STLE SP-31, pp 89-99.
13. Tallian, T. E. (1992), "Simplified Contact Fatigue Life Prediction Model-Part I: Review of Published Models," ASME, Journal of Tribology, 114(2), pp 207-213.
14. Zaretsky, E. V., Poplawski, J. V. and Peters, S. M. (1996), "Comparison of LifeTheories for Rolling-Element Bearings" STLETribologyTransactions, 39(2), pp 237-248, 501-503.
15. Zaretsky, E. V., Poplawski, J. V. and Miller, C. R. (2000), "Rolling Bearing Life Prediction-Past, Present, and Future," in: Proc. of the International Tribology Conf. Nagasaki, Vol. 1, Japanese Society of Tribologists, Tokyo, Japan, pp 101-107.
16. Harris, T. A. and Barnsby, R.M. (2001), "Life Ratings for Ball and Roller Bearings," Pro. Inst. Mech. Eng., 215, pp 577-595.
17. Zaretsky,E.V., Ed. (1992),"STLELifeFactors for Rolling Bearings," STLE SP-34, STLE, Park Ridge, IL.
18. Cheng, W. and Cheng, H. S. (1997), "Semi-Analytical Modelling of Crack Initiation Dominant ContactFatigue Life for Roller Bearings," ASMEJournal of Tribology, 119, pp 233-390.
19. Kotzalas, M. N. (2001), "A Theoretical Study of Residual Stress Effects on Fatigue Life Prediction," STLE Tribology Transaction, 44, pp 609-614.
20. Lamagnere, P., Fourgeres R., Lormand, G., Vincent, A., Girodin D., Dudragne, G. andVergne, F. (1998), "APhysically Based Model for Endurance Limit of Bearing Steels," Trans. ASME, J. of Trib., 120, pp 421-426.
21. Tanaka, H. and Tsushima, N. (2002), "Estimation of Rolling Bearing Life Under Contaminated Lubrication," Bearing Steel Technology, ASTM STP 1419, J. M. Beswick, Ed., pp 213-225.
22. Lormand,G., Piot,D., Vincent, A., Boudry,G., Daguier, P., Girodin,D. and Dudragne, G. (2002), "Application of a New Physically Based Model to Determine the Influence of Inclusion Population and Loading Conditions on the Distribution of Bearing Lives," Bearing Steel Technology, ASTM STP 1419, J. M. Beswick, Ed., pp 493-508.
23. Barnsby, R., Ed. (2003), "Life Ratings for Modern Rolling Bearings-A Design Guide for the Application of International Standard ISO 281/2," ASME Publication Trib-14, ASME, New York.
24. Morales-EspejelG. E., Lugt, P. M.,VanKuilenburg J. and Tripp J. H. (2003), "Effects of Surface Micro-Geometry on the Pressures and Internal Stresses of Pure Rolling EHL Contacts," STLE Tribology Transaction, 46, pp 260-272.
25. Tripp, J. H., Van Kuilenburg J. and Morales-Espejel G. E. (2003), "Frequency Response Functions and Rough Surface Stress Analysis," STLE Tribology Transaction, 46, pp 376-382.
26. Tallian, T.E., Chiu, Y.P. and Van Amerongen, E. (1978), "Prediction of Traction and Micro-Geometry Effects on Rolling Contact Fatigue Life," Trans. ASME, J. of Trib., 100, pp 156-166.
27. Bolton,W. K. (1977), "Elastohydrodynamic in Practice," in: Rolling Contact Fatigue: PerformanceTesting of Lubricants, Tourret, R. and Wright E.P., Ed. The Institute of Petroleum, London, pp 17-25.
28. Ioannides, E. and Kuijpers, J. C. (1986), "Elastic Stresses below Asperities in Lubricated Contacts," Transactions of ASME, 108, pp 394-402.
29. Tripp, J. H., Houpert, L. G., Ioannides, E. and Lubrecht, A.A. (1987), "Dry and Lubricated Contact of Rough Surfaces," Proc. I. Mech. Eng., International Conf. 1987-5 Mech. Eng. Pub. Ltd., London, pp 71-80.
30. Venner, C. H. (1991), "Mutilevel Solutions of the Line and Point Contact Problems," Ph.D. Diss., University of Twente, Enschede, The Netherlands.
31. Ai, X. and Cheng, H. S. (1994), "Influence of Moving Dent on Point EHL Contacts," STLE Tribology Transaction, 37(2), pp 323-333.
32. Ai, X. and Lee, S. C. (1996), "Effect of Slide-To-Roll Ratio on Interior Stresses Around a Dent in EHL Contacts," STLE Tribol. Trans., 39(4), pp 881-889.
33. Xu, G., Sadeghi, F. and Cogdell, J. D. (1997), "Debris Denting Effects on Elastohydrodynamic Lubricated Contacts," ASME Journal of Tribology, 119, pp 579-587.
34. Xu, G., Sadeghi, F. and Hoeprich, M. R. (1997), "Residual Stresses Due to Debries Effects in EHL Contacts," Tribology Transactions, 40(4), pp 613-620.
35. Nelias,D.,Ville, F. (2000), "Detrimental Effects of Debris Dents on Rolling Contact Fatigue," ASME Journal of Tribology, 122, pp 55-64.
36. Ville, F., Coulon, S. and Lubrecht A. A. (2006), "Influence of Solid Contaminants on the Fatigue Life of Lubricated Machine Elements," Proc. Imeche Part J, Engineering Tribology, 220, pp 441-445.
37. Chapkov, A. D., Colin, F. and Lubrecht, A. A. (2006), "Influence of Harmonic Surface Roughness on the Fatigue Life of EHL Contacts," Proc. Instn. Mech. Engrs, Part A: J. Engineering Tribology, 220, 287-294.
38. Greenwood, J. A. and Morales-Espejel, G. E. (1993), "The Behaviour of Real Transverse Roughness in a Sliding EHL Contact," in Thin Films in Tribology, D. Dowson et al. (Eds.), Elsevier Science Publishers, B.V., pp 227-236.
39. Morales-Espejel, G. E. Félix-Quiñonez, A. (1999), "Kinematics of Two-Sided Surface Features in Elastohydrodynamic Lubrication," Proc. Instn. Mech. Engrs., Part J, J. of Eng. Tribo., 213, pp 95-108.
40. Greenwood, J.A. and Morales-Espejel, G.E. (1994), "The Behaviour of Transverse Roughness In EHL Contacts," Proc. Instn. Mech. Engrs., Part J, J. of Eng. Tribo., 208, pp 121-132.
41. Morales-Espejel, G. E., Venner, C. H. and Greenwood, J. A., "Kinematics of Transverse Real Roughness in Elastohydrodynamically Lubricated Line Contacts Using Fourier Analysis," Proc. Instn. Mech. Engrs., Part J, J. of Eng. Tribo., 214, pp 523-534.
42. Félix-Quiñonez, A., Ehret, P., Summers, J. L. and Morales-Espejel, G. E. (2004), "Fourier Analysis of a Single Transverse Ridge Passing Through an Elastohydrodynamically Lubricated Rolling Contact: A Comparison with Experiment," Proc. Instn. Mech. Engrs., Part J, J. of Eng. Tribo., 218, pp 33-44.
43. Hooke, C. J., Li, K. Y. and Morales-Espejel, G. (2007), "Rapid Calculation of the Pressures and Clearances in Rough, Rolling-Sliding Elastohydrodynamically Lubricated Contacts. Part 1: Low-Amplitude, Sinusoidal Roughness," Proc. Imeche Part C: J. Mechanical Engineering Science, 221, pp 535-550.
44. Hooke, C. J., Li, K. Y. and Morales-Espejel, G. (2007), "Rapid Calculation of the Pressures and Clearances in Rough, Rolling-Sliding Elastohydrodynamically Lubricated Contacts. Part 2: General, Non-Sinusoidal Roughness," Proc. Imeche, Part C: J. Mechanical Engineering Science, 221, pp 551-564.
45. Venner, C. H., Kaneta, M. and Lubrecht, A. A. (2000), "Surface Roughness in Elastohydrodynamically Lubricated Contacts," Proc. of the 26th Leeds-Lyon Symp. on Trib. 1999. Elsevier Tribology Series, 38, Dowson, D. (Eds), pp 25-36.
46. Venner, C. H. and Lubrecht, A. A. (1999), "Amplitude Reduction of Non-Isotropic Harmonic Patterns in Circular EHL Contacts, Under Pure Rolling," Proc. of the 25th Leeds-Lyon Symp. on Trib. 1998. Elsevier Tribology Series, 34, Dowson, D. et al. (Eds.), pp 151-162.
47. Hooke, C. J. and Venner, C.H., (2000), "Surface Roughness Attenuation in Line and Point Contacts," Proc. Instn. Mech. Engrs., Part J, J. of Eng. Tribo., 214, pp 439-444.
48. Félix-Quiñonez, A., Ehret, P. and Summers, J. L. (2005), "On Three-Dimensional Flat-Top Defects Passing Thought An EHL Point Contact: A Comparison of Modeling with Experiments", ASME Journal of Tribology, 127, pp 51-60.
49. Gabelli, A., Voskamp,A. P., Shearer, S. and Ioannides, E. (1998), "The Service Life of Rolling Elements Bearings - Stress Field and Material Response Analysis," VDI Berichte Gleit Und Walzlagerungen, 1380.
50. Sayles, R. S. and Ioannides, E. (1988), "Debris Damage in Rolling Bearings and its Effect on Fatigue Life," ASME J. of Tribology, 110, pp 26-31.
51. Sayles, R. S., Hamer, J. C. and Ioannides, E. (1990),"The Effects of Particulate Contamination in Rolling Bearing-A State of the Art Review," Proc. Inst. Mech. Engrs., 204, pp 29-36.
52. Tripp, J. H. and Ioannides, E. (1990), "Effects of Surface Roughness on Rolling Bearing Life," Proceeding of Japan International Tribology Conference, Nagoya.
53. Webster, M. N. Ioannides, E. and Sayles R. S. (1985), "The Effect of Topographical Defects on the Contact Stress and Fatigue Life in Rolling Element Bearings," Proceedings. of the 12th Leeds-Lyon Symposium on Tribology, Lyon, France 3-4 Sept.
54. Ioannides, E., Jacobson,B. and Tripp, J. (1989), "Prediction of Rolling Bearing Life under Practical Operating Conditions," Proceeding of the 15th Leeds-Lyon Symposium on Tribology, pp 181-187.
55. Kang, Y., S., Sadeghi, F. and Hoeprich, M. (2004), "AFinite Element Model for Spherical Debris Denting in Heavily Loaded Contacts," ASME J. Tribol., 126, pp 71-80.
56. Gabelli A., Kerrigan A. M. and De Bilc E. (2000), "HN Treated Rolling Bearings For Extended Service Life," in: Progress in Heat Treatment and Surface Engineering, Proceedings of the Fifth ASM Heat Treatment Conference, Mittemeijer, E. J. and Grosch, J., Eds., June 2000, Göteborg, Sweden.
57. Harris, T. (2001), Rolling Bearing Analysis, 4th ed.Wiley Inter. Publication.
58. Ai, X. (2001), "Effect of Debris Contamination on the Fatigue Life of Roller Bearings," Proc. Instn. Mech. Engrs., Imeche, 215, Part J, pp 562-575.
59. Harris, T. A. and Kotzalas M. N. (2007), Advanced Concepts of Bearing Technology, CRC Taylor & Francis.
60. International Standard (2007), "Rolling Bearings-Dynamic Load Rating and Rating Life," ISO 281.
61. Dommarco, R. C., Bastias, P. C., Hahn, G. T. and Rubin C. A. (2002), "The Use of Artificial Defects in the 5-Ball-Rod Rolling Contact," Wear, 252, pp 430-437.
62. Wan G., Gabelli A. and Ioannides E. (1997), "Increased Performance of Hybrid Bearings with Silicon Nitride Balls" STLE 52th Annual Meeting in Kansas City, Tribology Transactions, 40, pp 701-707.
63. Sayles, R. S. and Macpherson, P. B. (1982), "Influence of Wear Debris on Rolling Contact Fatigue," Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J. J. C. Hoo, Ed., American Society for Testing and Materials, pp 255-274.
64. Leenders, P. (1983), "Endurance Testing In Practice," Ball Bearing Journal, 217, pp 24-31.
65. Goss, R. and Ioannides, E. (1989), "Performance Testing: Facilities and Opportunities," Ball Bearing Journal Special Issue, pp 12-21.
66. Sayles, R. S. and Macpherson P. B. (1982), "Influence of Wear Debris on Rolling Contact Fatigue," Rolling Contact Fatigue Testing of Bearing Steel, ASTM STP 771, J. J. Hoo, Ed., pp 255-274.
67. Needelman,W. M. and Zaretsky,E.V. (1991), "New Equation Show Oil Filtration Effects on Bearing Life," Power Transmission Design, 33(8), pp 63-70.