Effects of surface micro-geometry on the pressures and internal stresses of pure rolling ehl contacts

Tribology Transactions

Volumn 46, Issue 2, 2003, Pages 260-272

  Morales Espejel, G E ^a   Lugt, P M ^a   Van Kuilenburg, J ^b   Tripp, J H ^c  

^a SKF ENGINEERING AND RESEARCH CENTRE   (Netherlands)

^b EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^c UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

Elasto hydrodynamic lubrication; Surface roughness effects

Indexed keywords

ELASTOHYDRODYNAMICS; LUBRICATION; RESIDUAL STRESSES; STRESS ANALYSIS; TRIBOLOGY; MATHEMATICAL MODELS; PRESSURE MEASUREMENT; SURFACE ROUGHNESS; SURFACE TREATMENT;

ELASTO-HYDRODYNAMIC LUBRICATION; SUBSURFACE STRESSES; SURFACE ROUGHNESS EFFECTS;

SURFACE ROUGHNESS; ELASTOHYDRODYNAMIC LUBRICATION;

SURFACE PRESSURES;

ELASTOHYDRODYNAMIC LUBRICATION; FILM LUBRICANT; ROLLING CONTACT; SURFACE ROUGHNESS;

EID: 0141743696     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402000308982625     Document Type: Article

References (23)

1. Lee, K. M. and Cheng, H. S. (1973). "Effects of Surface Asperity on Elastohydrodynamic Lubrication." NASA CR-2195. Washington, D.C.
2. Chang, L., Cusano, C., and Conry, T. F. (1989). "Effects of Lubricant Rheology and Kinematic Conditions on Micro-Elastohydrodynamic Lubrication," ASME Jour, of Trih., 111, pp 344-351.
3. Venner, C. H. (1991). "Multilevel Solution of the EH L Line and Point Contact Problems," PhD Thesis, University ofTwente. Enschede, The Netherlands.
4. Morales-Espejel, G. E. (1993), "Elastohydrodynamic Lubrication of Smooth and Rough Surfaces," PhD-Thesis. Engineering Department, University of Cambridge, U.K.
5. Greenwood, J. A. and Morales-Espejel, G. E. (1994). "The Behaviour of Transverse Roughness in EH L Contacts," in Proc. Instn. Mech. Engrs., Part J, 208, pp 121-132.
6. Venner, C. H., Couhier, E, Lubrecht, A. A. and Greenwood, J. A. (1997), "Amplitude Reduction of Waviness in Transient EH L Line Contacts," in Proc. cf the 23th Leeds-Lyon Symp. on Trih. 1996 Elsevier Trihology Series. 32. Dowson, D. et al., Eds., pp 103-112.
7. Venner, C. H. and Lubrecht, A. A. (1999). "Amplitude Reduction of Non- Isotropic Harmonic Patterns in Circular EHL Contacts, under Pure Rolling," in Proc. cf the 25ih Leeds-Lyon Symp. on Trih. 1998. Elsevier Trihology Series, 34, Dowson, D., et al., Eds., pp 151-162.
8. Greenwood, J. A. (1999), "Transverse Roughness in Elastohydrodynamic Lubrication," in Proc. Instn. Merh. Engrs., Part J, 213, pp 383-396.
9. Morales-Espejel, G. E., Venner, C. H. and Greenwood, J. A. (2001). "Kinematics of Transverse Real Roughness in Elastohydrodynamicully Lubricated Line Contacts Using Fourier Analysis." in Proc. Instn. Mech. Engrs. Part J, 214. pp 523-534.
10. Hooke, C. J. (1998), "Surface Roughness Modification in Elastohydrodynamic Line Contacts Operating in the Elastic Piesoviscous Regime," in Proc. Instn, Mech. Engrs., 212. Pan J, pp 145-162.
11. Hooke, C. A. (1999)."The Behaviour of Low-Amplitude RoughnessUnder Line Contacts." in Proc. Insm. Mech. Engrs. 213, Pan J, pp 275-286.
12. Hooke, C. J. (2000). "The Behaviour of Low-Amplitude Surface Roughness Under Line Contacts: Non-Newtonian Fluids," in Proc. Instn. Mech. Engrs., 214, Pan J, pp 253-265.
13. Mnsen, M. A., Venner, C. H., Lugt, P. M. and Tripp, J. H. (2002), "Effects of Surface MicroGeometry on the Lift-Off Speed of an EHL Contact." Trih. Trans. 45, 1, pp 21-30.
14. Yuan-ZhongHu, Barber, G. C., Zhu, D. and Ai, X.(2001), "A Study on an FFT- Based Approach for Fast Estimation of Pressure Distribution in Point EHL Contacts of Rough Surfaces," Trih. Trans., 44, pp 59-69.
15. Lubrecht, A. A. and loannides, E. (1991), "A Fast Solution of the Dry Contact Problem and the Associated Sub-surface Stress Field. Using Multilevel Techniques," ASME Jour. Of Trih., 113, pp 128-132.
16. Hooke, C. J. and Venner, C. H. (2000). "Surface Roughness Attenuation in Line and Point Contacts," in Proc. Instn. Mech. Engrs., 214, Pan J, pp 439-444.
17. Venner, C. H., Kaneta, M. and Lubrecht, A. A. (2000), "Surface Roughness in Elastohydrodynamically Lubricated Contacts." in Proc. Of 26th Leeds-Lyon Symp. on Trihology, Leeds, 1999. Elsevier Trihology Series, 38, Dowson. D. et al. Eds., pp 25-36.
18. Lubrecht, A. A., ten Napel, W. E. and Bosma, R. (1988). "The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts," ASME Jour, of Trih., 110, pp 421-426.
19. Ai, X. and Sawamiphakdi, K. (1999). "Solving Elastic Contact Between Rough Surfaces as an Unconstrained Strain Energy Minimization by Using CGM and FFT Techniques,” ASME Jour, of Trih., 121, pp 639-647.
20. Johnson, K. L. (1985). Contact Mechanics. Cambridge University Press.
21. Hooke, C. J. and Li, K. Y. (1999), "An Experimental Study of the Relationship Between Surface Roughness and Stress in E H L Contacts." in Proc. 26th Leeds- Lyon Symp. on Trih.
22. Tripp, J., Kuilenburg, J., Morales-Espejel, G. E. and Lugt, P. M. (2002), "Subsurface Stress Formulas Useful in Rough Surface Stress Analysis” Submitted to Trih. Trans., STLE.
23. Chang, L. and Zhao, W. (1995), "Fundamental Differences Between Newtonian and Non-Newtonian Micro-EHL Results" ASME Jour of Trih. 117, pp 29-35.