Fracture mechanism of diamond like carbon (DLC) film subjected to contact loading

Zairyo/Journal of the Society of Materials Science, Japan

Volumn 57, Issue 5, 2008, Pages 474-480

  Yonezu, Akio ^a   Nakayama, Tomoyuki ^b   Ogawa, Takeshi ^b  

^a OSAKA UNIVERSITY   (Japan)

^b AOYAMA GAKUIN UNIVERSITY   (Japan)

Author keywords

Acoustic emission; Buckling; Contact fracture; Corrosion potential fluctuation; Delamination; Diamond like carbon film; Indentation

Indexed keywords

ACOUSTIC EMISSION; ACOUSTIC EMISSION (AE); APPLIED VOLTAGES; BUCKLING; CONTACT AREAS; CONTACT FRACTURE; CONTACT LOADING; CORROSION POTENTIAL FLUCTUATION; CORROSION POTENTIALS; CRACK MORPHOLOGY; DELAMINATION; DIAMOND LIKE CARBON FILM; DIAMOND-LIKE CARBON FILMS; DLC FILMS; FRACTURE MECHANISMS; INDENTATION; INDENTER; LOADING PROCESSES; RADIO FREQUENCY PLASMAS; RING CRACKS; ROCKWELL INDENTATION TESTS; SIMULTANEOUS MONITORING; STAINLESS STEELS; TWO TYPES; UNLOADING PROCESSES;

ACOUSTIC EMISSION TESTING; ACOUSTIC EMISSIONS; DIAMONDS; ELECTRIC LOAD MANAGEMENT; FRACTURE; FRACTURE FIXATION; ION BOMBARDMENT; ION IMPLANTATION; MECHANISMS; MOLECULAR BEAM EPITAXY; SILICONES; STAINLESS STEEL; UNLOADING; VICKERS HARDNESS TESTING;

DIAMOND FILMS;

EID: 48949083345     PISSN: 05145163     EISSN: None     Source Type: Journal    
DOI: 10.2472/jsms.57.474     Document Type: Article

References (22)

1. H. Suzuki and M. Ikenaga, "DLC Seimaku Gijyutu", pp.148-157 (2003) Nikkan-Kogyo-Shinbunsya.
2. Y. Nishimura, Y. Oka, K. Azuma, E. Fujiwara and M. Yatsuzaka, "Preparation of Ultra-Thick DLC Film using Pulsed Plasma-Based Ion Implantation and Deposition", Journal of High Temperature Society, Vol.29, No.5, pp.196-200 (2003).
3. Y. Oka and M. Yatsuzaka, "Measurement of Adhesion Strength of DLC Film Prepared by Utilizing Plasma-Based Ion Implantation", Institute of Electrical Engineers of Japan, Vol.126, No.8, pp.801-806 (2006).
4. Y. Miki, S. Adachi, Y. Nishimura, M. Sugihara and Y. Horino, "Residual Stress Measurement in DLC Films Prepared by Plasma-Based Ion Implantation and Deposition (PBUD) Method", Annual Report of Nara Prefectural Institute of Industrial Technology, Vol.31, pp.10-15 (2005).
5. J. S. Wang, Y. Sugiyama, A. G. Evans and W. K. Tredway, "The Mechanical Performance of DLC Films on Steel Substrates", Thin Solid Films, Vol.325, pp.163-174 (1998).
6. H. W. Choi, K. R. Lee, R. Wang and K. Hwan, "Fracture Behavior of Diamond-Like Carbon Films on Stainless Steel under a Micro-Tensile Test Condition", Diamond and Related Materials, Vol.15, pp.38-43 (2006).
7. Y. Isono, T. Namazu and N. Terayama, "Development of AFM Tensile Test Technique for Evaluationg Mechanical Properties of Sub-Micron Thick DLC Films", Journal of Microelectromechanical Systems, Vol.15, No.1, pp.169-180 (2006).
8. J. Michler and E. Blank, "Analysis of coating fracure and substrate plasticity induced by spherical indenters : diamond and diamond-like carbon layers on steel substrate", Thin Solid Films, Vol.381, pp.119-134 (2001).
9. Z.-H. Se, R. Singh, A. Bendavid, P. J. Martin, P. R. Munroe and M. Hoffman, "Contact Damage Evolution in a Diamond-Like Carbon (DLC) coating on a Stainless Steel Substrate", Thin Solid Filme, Vol.515, pp.3196-3201 (2007).
10. N. Naka, K. Yamamoto, Y. Isono, T. Tanaka and N. Terayama, "Evaluation of Adhesion Strength for Amorphous SiC Thin Film and DLC/a-SiC laminates Thin Film Deposited on Steel Substrates for Cutting Tool", Transaction of the Japan Society of Mechanical Engineers (A), Vol.66, No.644, pp.698-705 (2000).
11. R. Ikeda, M. Hayashi, A. Yonezu, H. Cho, T. Ogawa and M. Takemoto, "Measurement Fracture Strength of Diamond Film using AE and Corrosion Potential Fluctuation during Indentation Test", Transaction of the Japan Society of Mechanical Engineers (A), Vol.73, No.725, pp.57-65 (2007).
12. A. Yonezu, H. Cho, T. Ogawa and M. Takemoto, "Advanced Indentation for Fracture Strength Evaluation of Hard Films", Science and Technology of Advanced Material, Vol.7, pp.97-103 (2006).
13. W. C. Oliver and G. M. Pharr, "An Improved Technique for Determining Hardness and Elastic Modulus using Load and Displacement Sensing Indentation Experiments", Journal of Material Research, Vol.7, pp.1564-1583 (1992).
14. Y. T. Cheng and C. M. Cheng, "Scaling, Dimensional Analysis, and Indentation Measurement", Materials Science and Engineering, Vol.44, pp.91-149 (2004).
15. M. Dao, N. Chollacoop, K. J. Van Vliet, T. A. Venkatesh and S. Suresh, "Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation", Acta Materialia, Vol.49, pp.3899-3918 (2001).
16. J. L. Bucaille, S. Stauss, E. Felder and J. Michler, "Determination of Plastic Properties of Metals by Instrumented Indentation using Different Sharp Indenters", Acta Materialia, Vol.51, pp.1663-1678 (2003).
17. N. Ogasawara, W. Makiguchi and N. Chiba, "Plastic Properties Determination Method for Power-Low Hardening Material using Plural Triangular Pyramid Indenters", Transaction of the Japan Society of Mechanical Engineers (A), Vol.70, No.698, pp.1529-1534 (2004).
18. T. Ohno, A. Yonezu, T. Ogawa and J. Akimitu, "Evaluation of Mechanical Properties and Strength Characteristics of Micro Region using Indentation Method", Journal of Material Testing Research Association of Japan, Vol.49, No.3, pp.149-156 (2004).
19. A. Yonezu, T. Ogawa and M. Takemoto, "Evaluations of Elasto-Plastic Properties and Fracture Strength using Indentation Technique", Key Engineering Materials, Vols.353-358, pp.2223-2226 (2007).
20. A. Yonezu, M. Hayashi, H. Cho, T. Ogawa and M. Takemoto, "Fatigue Strength Evaluation of Hard Surface Film by Indentation", Progress in Acoustic Emission IIIX, pp.287-294, (2006).
21. H. Kagawa, M. Ichikawa and T. Takamatu, "Contact Pressure Profiles in Film-Substrate Systems Indented by An Elastic Sphere : For Evaluation of Mechanical Properties of Thin Films" Transaction of the Japan Society of Mechanical Engineers (A), Vol.58, No.546, pp.223-229 (1992).
22. A. Yonezu, T. Ohno, T. Ogawa and M. Takemoto, "Fracture Mechanism of Analysis and Strength Evaluation off Ceramic Thin Film during Indentation Testing" Journal of the Society of Material Science, Japan, Vol.54, No.10, pp.1030-1035 (2005).