Polymerization contraction stress in dentin adhesives bonded to dentin and enamel

Dental Materials

Volumn 24, Issue 10, 2008, Pages 1304-1310

  Hashimoto, Masanori ^a   de Gee, Anton J ^b   Feilzer, Albert J ^b  

^a HEALTH SCIENCES UNIVERSITY OF HOKKAIDO   (Japan)

^b UNIVERSITY OF AMSTERDAM   (Netherlands)

Author keywords

Dentin; Enamel; Polymerization; Polymerization contraction stress; Resin adhesive

Indexed keywords

CHEMICAL REACTIONS; CURING; DENTAL MATERIALS; DENTAL PROSTHESES; DEWATERING; DRYING; ENAMELS; ETCHING; EVAPORATION; MOISTURE; MONOMERS; PHOSPHORIC ACID; POLYMERIZATION; POLYMERS; RESINS; SHRINKAGE; SOLVENTS; STRESS RELIEF; SURFACE DIFFUSION; SURFACES; VAPORS;

ADHESIVE LAYERS; ADHESIVE SYSTEMS; CONTRACTION STRESS; DENTIN ADHESIVES; ENAMEL SURFACE; GLASS PLATES; HYDROPHOBIC MONOMERS; LIGHT-CURING; MULTI PURPOSE; POLYMERIZATION CONTRACTION STRESS; SELF-ETCHING ADHESIVES; SELF-ETCHING PRIMERS; SINGLE BONDS; THIN LAYERING; UNDER CONSTRAINED;

ADHESIVES;

ACRYLIC ACID RESIN; ADHESE CEMENT; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CLEARFIL PROTECT BOND; CLEARFIL SE BOND; DENTIN BONDING AGENT; ONE STEP PLUS; ONE-STEP PLUS; POLYMER; RESIN CEMENT; SCOTCHBOND MULTI PURPOSE; SCOTCHBOND MULTI-PURPOSE; SINGLE BOND; SOLVENT; UNCLASSIFIED DRUG; WATER; XENO III;

ANIMAL; ARTICLE; CATTLE; CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTIN; DESICCATION; ENAMEL; HYDROPHOBICITY; LIGHT; MATERIALS TESTING; MECHANICAL STRESS; ULTRASTRUCTURE;

ACID ETCHING, DENTAL; ACRYLIC RESINS; ANIMALS; BISPHENOL A-GLYCIDYL METHACRYLATE; CATTLE; DENTAL BONDING; DENTAL ENAMEL; DENTIN; DENTIN-BONDING AGENTS; DESICCATION; HYDROPHOBICITY; LIGHT; MATERIALS TESTING; POLYMERS; RESIN CEMENTS; SOLVENTS; STRESS, MECHANICAL; WATER;

EID: 48749126717     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.02.008     Document Type: Article

References (37)

1. Labella R., Lambrechts P., Van Meerbeek B., and Vanherle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater 15 (1999) 128-137
2. Kleverlaan C.J., and Feilzer A.J. Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater 21 (2005) 1150-1157
3. Peutzfeldt A., and Asmussen E. Determinants of in vitro gap formation of resin composites. J Dent 32 (2004) 109-115
4. Braga R.R., and Ferracane J.L. Alternatives in polymerization contraction stress management. Crit Rev Oral Biol Med 15 (2004) 176-184
5. Palin W.M., Fleming G.J., Nathwani H., Burke F.J., and Randall R.C. In vitro cuspal deflection and microleakage of maxillary premolars restored with novel low-shrink dental composites. Dent Mater 21 (2005) 324-335
6. Fleming G.J., Hall D.P., Shortall A.C., and Burke F.J. Cuspal movement and microleakage in premolar teeth restored with posterior filling materials of varying reported volumetric shrinkage values. J Dent 33 (2005) 139-146
7. Causton B.E., Miller B., and Sefton J. The deformation of cusps by bonded posterior composite restorations: an in vitro study. Brit Dent J 159 (1985) 397-400
8. Jorgensen K.D., Asmussen E., and Shimokobe H. Enamel damage caused by contracting restorative resins. Scand J Dent Res 83 (1975) 120-122
9. Dauvillier B.S., Aarnts M.P., and Feilzer A.J. Modeling of the viscoelastic behavior of dental light-activated resin composites during curing. Dent Mater 19 (2003) 277-285
10. Watts D.C., Marouf A.S., and Al-Hindi A.M. Photo-polymerization shrinkage-stress kinetics in resin-composites: methods development. Dent Mater 19 (2003) 1-11
11. Bolhuis H.P.B., de Gee A.J., Kleverlaan C.J., El Zohairy A.A., and Feilzer A.J. Contraction stress and bond strength to dentin for compatible and incompatible combinations of bonding systems and chemical and light-cured core build-up resin composites. Dent Mater 22 (2006) 223-233
12. Hashimoto M., De Gee A.J., Kaga M., and Feilzer A.J. Contraction stress in dentin adhesives bonded to dentin. J Dent Res 85 (2006) 728-732
13. Hashimoto M., Ito S., Tay F.R., Svizero N.R., Sano H., Kaga M., et al. Fluid movement across the resin-dentin interface during and after bonding. J Dent Res 11 (2004) 843-848
14. Sano H., Yoshikawa T., Pereira P.N.R., Kanemura N., Morigami M., Tagami J., et al. Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res 78 (1999) 906-911
15. Hashimoto M., Ohno H., Kaga M., Endo K., Sano H., and Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 9 (2000) 1385-1391
16. Hashimoto M., Ohno H., Sano H., Tay F.R., Kaga M., Kudou Y., et al. Micromorphological changes in resin-dentin bonds after 1 year of water storage. J Biomed Mater Res 63 (2002) 306-311
17. Li H.P., Burrow M.F., and Tyas M.J. The effect of long-term storage on nanoleakage. Oper Dent 26 (2001) 609-616
18. De Munck J., Van Meerbeek B., Yoshida Y., Inoue S., Vargas M., Suzuki K., et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82 (2003) 136-140
19. Tay F.R., and Pashley D.H. Water-treeing: a potential mechanism for degradation of dentin adhesives. Am J Dent 16 (2003) 6-12
20. Shinohara M.S., de Oliveira M.T., Hipólito V.D., Giannini M., and de Goes M.F. SEM Analysis of the acid-etched enamel patterns promoted by acidic monomers and phosphoric acids. J Appl Oral Sci 14 (2006) 427-435
21. Grégoire G., and Ahmed Y. Evaluation of the enamel etching capacity of six contemporary self-etching adhesives. J Dent 35 (2007) 388-397
22. Applebaum E. Concerning the permeability of human enamel. J Dent Res 11 (1931) 611-618
23. Kuhar M., Cevc P., Schara M., and Funduk N. Enhanced permeability of acid-etched or ground dental enamel. J Prosthet Dent 77 (1997) 578-582
24. Tay F.R., and Pashley D.H. Aggressiveness of contemporary self-etching systems. Depth of penetration beyond dentin smear layers. Dent Mater 17 (2001) 296-308
25. Tay F.R., Pashley D.H., and Yoshiyama M. Two modes of nanoleakage expression in single-step adhesives. J Dent Res 81 (2002) 472-476
26. Van Landuyt K.L., De Munck J., Snauwaert J., Coutinho E., Poitevin A., Yoshida Y., et al. Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res 84 (2005) 183-188
27. Gregoire G.L., Akon B.A., and Millas A. Interfacial micromorphological differences in hybrid layer formation between water- and solvent-based dentin bonding systems. J Prosthet Dent 87 (2002) 633-641
28. Mohan B., and Kandaswamy D. A confocal microscopic evaluation of resin-dentin interface using adhesive systems with three different solvents bonded to dry and moist dentin-an in vitro study. Quintessence Int 36 (2005) 511-521
29. Gregoire G., and Millas A. Microscopic evaluation of dentin interface obtained with 10 contemporary self-etching systems: correlation with their pH. Oper Dent 30 (2005) 481-491
30. Tay F.R., Sano H., Carvalho R., Pashley E.L., and Pashley D.H. An ultrastructural study of the influence of acidity of self-etching primers and smear layer thickness on bonding to intact dentin. J Adhes Dent 2 (2000) 83-98
31. Tay F.R., King N.M., Chan K.-M., and Pashley D.H. How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simulatenously?. J Adhes Dent 4 (2002) 255-269
32. Tay F.R., Hashimoto M., Pashley D.H., Peters M.C., Lai S.C., Yiu C.K., et al. Aging affects two modes of nanoleakage expression in bonded dentin. J Dent Res 82 (2003) 537-541
33. Carvalho R.M., Chersoni S., Frankenberger R., Pashley D.H., Prati C., and Tay F.R. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 26 (2005) 1035-1042
34. Feilzer A.J., de Gee A.J., and Davidson C.L. Relaxation of polymerization contraction shear stress by hygroscopic expansion. J Dent Res 69 (1990) 36-39
35. Shono Y., Terashita M., Shimada J., Kozono Y., Carvalho R.M., Russell C.M., et al. Durability of resin-dentin bonds. J Adhes Dent 1 (1999) 211-218
36. Reis A., Grandi V., Carlotto L., Bortoli G., Patzlaff R., Rodrigues Accorinte Mde L., et al. Effect of smear layer thickness and acidity of self-etching solutions on early and long-term bond strength to dentin. J Dent 33 (2005) 549-559
37. Lai S.C.N., Tay F.R., Cheung G.S.P., Mak Y.F., Carvalho R.M., Wei S.H.Y., et al. Reversal of compromised bonding in bleached enamel. J Dent Res 81 (2002) 477-481