A confocal microscopic evaluation of resin-dentin interface using adhesive systems with three different solvents bonded to dry and moist dentin-an in vitro study

Quintessence International

Volumn 36, Issue 7, 2005, Pages 511-521

  Mohan, Bhuvaneswaran ^a   Kandaswamy, Deivanayagam ^b  

^a SAVEETHA UNIVERSITY   (India)

^b Tamilnadu Govt Dental College and Hospital   (India)

Author keywords

Confocal microscope; Dentin adhesives; Dentin bonding; Dry wet bonding; Hybridization; Moist bonding; Resin dentin interface

Indexed keywords

2 HYDROXYETHYL METHACRYLATE; ACETONE; ACRYLIC ACID DERIVATIVE; ADHESIVE AGENT; ALCOHOL; CETYLAMINE HYDROFLUORIDE; DENTIN BONDING AGENT; GLYCIDYLMETHACRYLATE; MALEIC ACID; METHACRYLIC ACID; PHOSPHORIC ACID; POLYACRYLIC ACID; POLYALKENOIC ACID COPOLYMER; RESIN; SILICON DIOXIDE; SOLVENT; STABILIZING AGENT; UNCLASSIFIED DRUG; WATER;

AIR; ANALYTIC METHOD; ARTICLE; CONFOCAL MICROSCOPY; CONTROLLED STUDY; DENTAL ETCHING; DENTIN; DESICCATION; EVALUATION; HUMAN; HUMAN TISSUE; HYBRID; IN VITRO STUDY; MICROSCOPE; PREMOLAR TOOTH; RANDOMIZATION; TIME; TOOTH EXTRACTION;

ACETONE; ACID ETCHING, DENTAL; AIR; BISPHENOL A-GLYCIDYL METHACRYLATE; COLLAGEN; DENTAL BONDING; DENTIN; DENTIN-BONDING AGENTS; DESICCATION; ETHANOL; FLUORESCENT DYES; HUMANS; MATERIALS TESTING; MICROSCOPY, CONFOCAL; PHOSPHORIC ACIDS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SOLVENTS; TIME FACTORS; WATER;

EID: 20544475809     PISSN: 00336572     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (57)

1. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by infiltration of monomers into tooth substrates. J Biomed Mater Res 1982;16: 265-273.
2. Nakabayashi N. Bonding of restorative materials to dentin: The present status in Japan. Int Dent J 1985 35: 145-154.
3. Van Meerbeek B, Conn LJ, Duke ES, Eick JD, Robinson SJ, Guerrero D. Correlative transmission electron microscopy examination of nondemineralized and mineralized resin-dentin interfaces formed by two dentin adhesives systems. J Dent Res 1996;75: 879-888.
4. Van Meerbeek B, Dhem A, Goret Nicaise M, Braem M, Lanbrechts P, Vanherle G. Comparative SEM and TEM examination of the ultrastructure of the resindentin interdiffussion zone. J Dent Res 1993;72: 495-501.
5. Van Meerbeek B, Inokoshi, Braem M, Lanbrechts P, Vanherle G. Morphological aspects of the resindentin interdiffusion zone with different dentin adhesive systems. J Dent Res 1992;71: 1530 -1540.
6. Brännstrom M. Etiology of dentin sensitivity. Proc Finn Dent Soc 1992;88 (suppl 1): 1-7.
7. Brännstrom M. The cause of post restorative sensitivity and its prevention. J Endod 1986;2: 475-481.
8. Pioch T, Stotz S, Stachle HJ, Duschner H. Applications of confocal laser scanning microscopy to dental bonding. Adv Dent Res 1997;11: 453-461.
9. Watson TF. Applications of confocal scanning optical microscopy to dentistry. Br Dent J 1991;171: 287-291.
10. Kanca J. Resin bonding to wet substrate I: Bonding to dentin. Quintessence Int 1992;23: 39-41.
11. Tay FR, Gwinnett JA, Wei SH. The overwet phenomenon: A transmission electron microscopic study of surface moisture on the acid-conditioned, resindentin interface. Am J Dent 1996;9: 161-166.
12. Pioch T, Stotz S, Buff E, Duschner H, Staehle HJ. Influence of different etching times on hybrid layer formation and tensile bond strength. Am J Dent 1998;11: 202-206.
13. Eick JD. Smear layer-materials surface. Proceedings of the Finnish Dental Society 1992;88: 225-242.
14. Eliades G, Palaghias G, Vougiouklakis G. Surface reactions of adhesives on dentin. Dent Mater 1990;6: 208-216.
15. Spencer P, Byerley TJ, Eick JD, Witt JD. Chemical characterization of the dentin/adhesive interface by Fourier Transform infrared photoacoustic spectroscopy. Dent Mater 1992;8: 10-15.
16. Van Meerbeek B, Mohrbacher H, Celis JP, et al. Chemical characterization of the resin-dentin interface by microraman spectroscopy. J Dent Res 1993;72: 1423-1428.
17. Bowen RL, Marjenhoff WA. Development of an adhesive bonding system. Oper Dent 1992;5(suppl): 75-80.
18. Fusayama T. A simple pain-free adhesive restorative system by minimal reduction and total etching. Tokyo: Ishiyaku Euro America, 1993: chapter 3.
19. Gwinnett AJ. Quantitative contribution of resin infiltration/ hybridization to dentin bonding. Am J Dent 1993;6: 7-9.
20. Nakabayashi N, Pashley DH (eds). Hybridization of Dental Hard Tissues. Chicago: Quintessence, 1998: 37-45.
21. Pashley DH, Sano H, Ciucchi B, Carvalho RM, Russell CM. Bond strength versus dentin structures: A modeling approach. Arch Oral Biol 1995;40: 1109-1118.
22. Pashley DH, RM Carvalho. Dentin permeability and dentine adhesion. J Dent Res 1997;25: 355-372.
23. Nakabayashi N. Resin reinforced dentin due to infiltration of monomers into dentin at the adhesive interface. J Jap Dent Mater 1982;1: 78-81.
24. O’Sullivan R, Flannelly M. Leeuwenhoek and the structure of dentin. J Ir Dent Assoc 1990;36: 129-133.
25. Fusayama T, Nakamure M, Kurosaki N Iwaku M. Non pressure adhesion of a new adhesive restorative resin. J Dent Res 1979;58: 1364-1370.
26. Bertolotti RL. Total etch-The rational dentin bonding protocol. J Esthet Dent 1991;3: 1-6.
27. Kanca J. Bonding to tooth structure: A rational rationale for a clinical protocol. J Esthet Dent 1989;1: 135-138.
28. Tay FR, AJ Gwinnett, KM Pang, Wei SH. Resin permeation into acid-conditioned moist and dry dentin: A paradigm using water free adhesive primers. J Dent Res 1996;75: 1034-1044.
29. Van Meerbeek B, Yoshida Y, Lambrects P, et al. A TEM study of two water based adhesive systems bonded to dry and wet dentin. J Dent Res 1998;77: 50-59.
30. Tay FR, Gwinnett AJ, Pang KM. Variability in microleakage observed in a total etch wet bonding technique under different handling conditions. J Dent Res 1995;74: 1068-1078.
31. Kanca J III. Improving bond strength through etching of dentin and bonding to wet dentin surfaces. J Am Dent Assoc 1992;123: 35-43.
32. Pereira GD, Paulillo LA, De Goes MF, Dias CT. How wet should dentin be? Comparison of the methods to remove excess water during moist bonding. J Adhes Dent 2001;3: 257-264.
33. Perdigao J, Frankenberger R. Effect of solvent and rewetting time on dentin adhesion. Quintessence Int 2001;32: 385-390.
34. Romney RL, Dickens SH. Bonding to dry dentin with water-modified acetone-based primers. J Dent Res 1997;76: 257.
35. Watanabe I, Nakabayashi N, Pashley DH. Bonding to ground dentin using a phenyl-P self-etching primer. J Dent Res 1994;73: 1212-1220.
36. Nakabayashi N, Takarada K. Effect of HEMA on bonding to dentin. Dent Mater 1992;8: 125-130.
37. Ferrari M, Tay FR. Technique sensitivity in bonding to vital, acid etched dentin. Oper Dent 2003;28: 3-8.
38. Tay FR, Gwinnett AJ, Pang KM. Structural evidence of a sealed tissue interface with a total etch wet bonding technique in vivo. J Dent Res 1994;73: 629-636.
39. Carvalho RM, Zhang Y, Shono H, Pashley DH. Shrinkage force of demineralized dentin during air drying. J Dent Res 1996;76(special issue): 238.
40. Gwinnett AJ. Dentin bond strength after air drying and rewetting. Am J Dent 1994;7: 144-148.
41. Perdigao J, Swift EJ, Heyman HO, Malek MA. Effect of a rewetting agent on the performance of acetone based dentin adhesive. Am J Dent 1998;11: 207-213.
42. Finger WJ, Balknenhol M. Rewetting strategies for bonding to dry dentin with an acetone based adhesive. J Adhes Dent 2000;2(1): 51-56.
43. Maciel KT, Carvalho RM, Ringle RD, Preston CD, Russel CM, Pashley DM. The effects of acetone, ethanol, HEMA and air on the stiffness of human demineralised dentin. J Dent Res 1996;75: 1851-1858.
44. Balooch M, W-Magidi IC, Balazs A, et al. Viscoelastic properties of demineralized human dentin measured in water with atomic force microscope (AFM)- based indentation. J Biomed Mater Res 1998;40: 539-544.
45. Sugizaki J. The effects of various primers on dentin adhesion of resin composites. Jap J Cons Dent 1991;34: 228-265.
46. Suzuki K, Tatahashi M, Nakai H. Treatment of dentin by aqueous solution of amino acid derivative-HEMA. Adhes Dent 1990;8: 43-51.
47. Uno S, Finger WJ. The effects of acidic conditioners on dentine demineralization and dimensions of hybrid layers. J Dent 1996;24: 211-216.
48. Tay FR, Gwinnett JA, Wei SH. Micromorphological spectrum of acid-conditioned dentin following the application of a water-based adhesive. Dent Mater 1998;14: 329-338.
49. Perdigao J, Van Meerbeck B, Lopes MM, Ambrose WW. The effect of a re-wetting agent on dentin bonding. Dent Mater 1999;15: 282-295.
50. Kanca J. Effect of resin primer solvents and surface wetness on resin composite bond strength to dentin. Am J Dent 1992;5: 213-215.
51. Kanca J. Wet bonding: Effect of drying time and distance. Am J Dent 1996;9: 273-276.
52. Kanca JA. Method for bonding to tooth structure using phosphoric acid as a dentine enamel conditioner. Quintessence Int 1991;22: 285-290.
53. Fritz UB, Finger WJ, Uno S. Resin-modified glass ionomer cements bonding to enamel and dentin. Dent Mater 1996;12: 161-166.
54. Jacobsen T, Soderholm KJ. Some effects of water on dentin bonding. Dent Mater 1995;11: 132-136.
55. Haller B. Recent developments in dentin bonding. Am J Dent 2000;13: 45-50.
56. Santini A, Mitchell S. Effect of wet and dry bonding techniques on marginal leakage. Am J Dent 1998;11: 219-224.
57. Vargas MA, Swift EJ Jr. Microleakage of resin composites with wet versus dry bonding. Am J Dent 1994;7: 187-189.