Corrosion behavior

Bulk Metallic Glasses: An Overview

Volumn , Issue , 2008, Pages 205-234

  Green, Brandice A ^a   Liaw, Peter ^a   Buchanan, Raymond A ^a  

^a University of Tennessee Knoxville   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 47049083789     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-48921-6_8     Document Type: Chapter

References (118)

1. W. L. Johnson, Bulk metallic glasses -A new engineering material, Curr. Opin. Solid State Mater. Sci. 1(3), 383-386 (1996
2. K. Hashimoto, in Amorphous Metallic Alloys, edited by F. E. Luborsky (Butterworths, London, 1983), pp. 471-486
3. A. Gebert, J. Eckert, and L. Schultz, Effect of oxygen on phase formation and thermal stability of slowly cooled Zr65Al7.5Cu17.5Ni10 metallic glass, Acta Mater. 46(15), 5475-5482 (1998
4. C. T. Liu, M. F. Chisholm, and M. K. Miller, Oxygen impurity and microalloying effect in a Zr-based bulk metallic glass alloy, Intermetallics 10(11-12), 1105-1112 (2002
5. B. S. Murty, D. H. Ping, K. Hono, and A. Inoue, Direct evidence for oxygen stabilization of icosahedral phase during crystallization of Zr65Cu27.5Al7.5 metallic glass, Appl. Phys. Lett. 76(1), 55-57 (2000
6. D. J. Sordelet, X. Yang, E. A. Rozhkova, M. F. Besser, and M. J. Dramer, Influence of oxygen content in phase selection during quenching of Zr80Pt20 melt spun ribbons, Intermetallics 12(10-11), 1211-1217 (2004
7. C. T. Liu and Z. P. Lu, Effect of minor alloying additions on glass formation in bulk metallic glasses, Intermetallics 13, 415-418 (2005
8. A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater. 48(1), 279-306 (2000
9. E. E. Stansbury and R. A. Buchanan, Fundamentals of Electrochemical Corrosion (ASM International, Materials Park, 2000
10. D. A. Jones, Principles and Prevention of Corrosion, 2nd ed. (Prentice Hall, Upper Saddle River, 1995
11. H. H. Uhlig and R. W. Revie, Corrosion and Corrosion Control, 3rd ed. (Wiley-Interscience, New York, 1985
12. W. H. Peter, R. A. Buchanan, C. T. Liu, P. K. Liaw, M. L. Morrison, C. A. Carmichael, Jr., and J. L. Wright, Localized corrosion behavior of a zirconium-based bulk metallic glass relative to its crystalline state, Intermetallics 10(11-12), 1157-1162 (2002
13. M. L. Morrison, R. A. Buchanan, R. V. Leon, C. T. Liu, B. A. Green, P. K. Liaw, and J. A. Horton, The electrochemical evaluation of a Zr-based bulk metallic glass in a phosphate-buffered saline electrolyte, J. Biomed. Mater. Res. A 74(3), 430-438 (2005
14. G. S. Frankel, Pitting corrosion of metals: A review of the critical factors, J. Electrochem. Soc. 145(6), 2186-2198 (1998
15. H. Böhni, in Uhlig's Corrosion Handbook, edited by R. W. Revie (Wiley, New York, 2000), pp. 173-190
16. H-H. Strehblow, in Corrosion Mechanisms in Theory and Practice, edited by P. Marcus and J. Oudar (Dekker, New York, 1995
17. Z. Szklarska-Smialowska, Mechanism of pit nucleation by electrical breakdown of the passive film, Corros. Sci. 44(5), 1143-1149 (2002
18. U. R. Evans, The passivity of metals. Part I. The isolation of the protective film, J. Chem. Soc., Chem. Commun. 1020-1040 (1927
19. T. P. Hoar, The breakdown and repair of oxide films on iron, Trans. Faraday Soc. 45, 683-693 (1949
20. K. Asami, C-L. Qin, T. Zhang, and A. Inoue, Effect of additional elements on the corrosion behavior of a Cu-Zr-Ti bulk metallic glass, Mater. Sci. Eng. A 375-377, 235-239 (2004
21. B. Liu and L. Liu, The effect of microalloying on thermal stability and corrosion resistance of Cu-based bulk metallic glasses, Mater. Sci. Eng. A 415(1-2), 286-290(2006
22. C. L. Qin, K. Asami, T. Zhang, W. Zhang, and A. Inoue, Corrosion behavior of Cu-Zr-Ti-Nb bulk glassy alloys, Mater. Trans. 44(4), 749-753 (2003
23. C. L. Qin, W. Zhang, K. Asami, N. Ohtsu, and A. Inoue, Glass formation, corrosion behavior and mechanical properties of bulk glassy Cu-Hf-Ti-Nb alloys, Acta Mater. 53(14), 3903-3911 (2005
24. L. Liu and B. Liu, Influence of the micro-addition of Mo on glass forming ability and corrosion resistance of Cu-based bulk metallic glasses, Electrochim. Acta 51(18), 3724-3730 (2006
25. M. K. Tam, S. J. Pang, and C. H. Shek, Effects of niobium on thermal stability and corrosion behavior of glassy Cu-Zr-Al-Nb alloys, J. Phys. Chem. Solids 67(4), 762-766(2006
26. C. L. Qin, W. Zhang, H. Kimura, K. Asami, and A. Inoue, New Cu-Zr-Al-Nb bulk glassy alloys with high corrosion resistance, Mater. Trans. 45(6), 1958-1961 (2004
27. B. Liu, L. Liu, M. Sun, C. L. Qiu, and Q. Chen, Influence of Cr micro-addition on the glass forming ability and corrosion resistance of Cu-based bulk metallic glasses, Acta Metall. Sin. 41(7), 738-742 (2005
28. C. L. Qin, K. Asami, T. Zhang, W. Zhang, and A. Inoue, Effects of additional elements on the glass formation and corrosion behavior of bulk glassy Cu-Hf-Ti alloys, Mater. Trans. 44(5), 1042-1045 (2003
29. S. J. Pang, T. Zhang, K. Asami, and A. Inoue, Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance, Corros. Sci. 44(8), 1847-1856 (2002
30. S. J. Pang, T. Zhang, K. Asami, and A. Inoue, Formation of bulk glassy Fe75-x-yCrxMoyC15B10 alloys and their corrosion behavior, J. Mater. Res. 17(3), 701-704(2002
31. K. Asami, S. J. Pang, T. Zhang, and A. Inoue, Preparation and corrosion resistance of Fe-Cr-Mo-C-B-P bulk glassy alloys, J. Electrochem. Soc. 149(8), B366-B369 (2002
32. S. J. Pang, T. Zhang, K. Asami, and A. Inoue, Synthesis of Fe-Cr-Mo-C-B-P bulk metallic glasses with high corrosion resistance, Acta Mater. 50(3), 489-497 (2002
33. J. Jayaraj, Y. C. Kim, K. B. Kim, H. K. Seok, and E. Fleury, Corrosion studies on Febased amorphous alloys in simulated PEM fuel cell environment, Sci. Tech. Adv. Mater. 6(3-4), 282-289 (2005
34. H. Katagiri, S. Meguro, M. Yamasaki, H. Habazaki, T. Sato, A. Kawashima, K. Asami, H. Habazaki, H. Ukai, K. Izumiya, K. Hashimoto An attempt at preparation of corrosion-resistant bulk amorphous Ni- Cr-Ta-Mo-P-B alloys, Corros. Sci. 43(1), 183-191 (2001).
35. H. Habazaki, H. Ukai, K. Izumiya, and K. Hashimoto, Corrosion behaviour of amorphous Ni-Cr-Nb-P-B bulk alloys in 6M HCl solution, Mater. Sci. Eng. A 318 (1-2), 77-86 (2001).
36. H. Habazaki, T. Sato, A. Kawashima, K. Asami, and K. Hashimoto, Preparation of corrosion-resistant amorphous Ni-Cr-P-B bulk alloys containing molybdenum and tantalum, Mater. Sci. Eng. A 304-306, 696-700 (2001).
37. C. L. Qin, W. Zhang, H. Nakata, H. Kimura, K. Asami, and A. Inoue, Effect of tantalum on corrosion resistance of Ni-Nb(-Ta)-Ti-Zr glassy alloys at high temperature, Mater. Trans. 46(4), 858-862 (2005
38. K. Shimamura, A. Kawashima, K. Asami, and K. Hashimoto, Corrosion behavior of amorphous nickel-valve metal-alloys in boiling concentrated nitric and hydrochloric acids, Sci. Rep. Res. Tohoku A 33(1), 196-210 (1986).
39. A. Mitsuhashi, K. Asami, A. Kawashima, and K. Hashimoto, The corrosion behavior of amorphous nickel base alloys in a hot concentrated phosphoric acid, Corros. Sci. 27(9), 957-970 (1987
40. H-J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The effect of phosphorus addition on the corrosion behavior of amorphous Ni-30Ta-P alloys in 12 M HCl, Corros. Sci. 37(2), 321-330 (1995
41. H-J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The effect of phosphorus on the passivation behavior of Ni-10Ta-P alloys in 12 M HCl, Corros. Sci. 37(8), 1313-1324 (1995
42. H-J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The roles of tantalum and phosphorus in the corrosion behavior of Ni-Ta-P alloys in 12 M HCl, Corros. Sci. 39(2), 321-332 (1997
43. A. Kawashima, H. Habazaki, and K. Hashimoto, Highly corrosion-resistant Ni-based bulk amorphous alloys, Mater. Sci. Eng. A 304-306, 753-757 (2001
44. S. Pang, T. Zhang, K. Asami, and A. Inoue, Bulk glassy Ni(Co-)Nb-Ti-Zr alloys with high corrosion resistance and high strength, Mater. Sci. Eng. A 375-377, 368-371(2004
45. S-J. Pang, C-H. Shek, T. Zhang, K. Asami, and A. Inoue, Corrosion behavior of glassy Ni55Co5Nb20Ti10Zr10 alloy in 1N HCl solution studied by potentiostatic polarization and XPS, Corros. Sci. 48(3), 625-633 (2006
46. K. Hashimoto, 2002 W. R. Whitney Award Lecture: In pursuit of new corrosion-resistant alloys, Corrosion 58(9), 715-722 (2002
47. M. Mehmood, B-P. Zhang, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, Experimental evidence for the critical size of heterogeneity areas for pitting corrosion of Cr-Zr alloys in 6 M HCl, Corros. Sci. 40(1), 1-17 (1998
48. A. Gebert, U. Kuehn, S. Baunack, N. Mattern, and L. Schultz, Pitting corrosion of zirconium-based bulk glass-matrix composites, Mater. Sci. Eng. A 415(1-2), 242-249(2006
49. K. Asami, H. Habazaki, A. Inoue, and K. Hashimoto, Recent development of highly corrosion resistant bulk glassy alloys, Mater. Sci. Forum 502, 225-230 (2005
50. C. L. Qiu, L. Liu, M. Sun, and S. M. Zhang, The effect of Nb addition on mechanical properties, corrosion behavior, and metal-ion release of ZrAlCuNi bulk metallic glasses in artificial body fluid, J. Biomed. Mater. Res. A 75(4), 950-956 (2005
51. K. Mondal, B. S. Murty, and U. K. Chatterjee, Electrochemical behaviour of amorphous and nanoquasicrystalline Zr-Pd and Zr-Pt alloys in different environments, Corros. Sci. 47(11), 2619-2635 (2005
52. L. Liu, C. L. Qiu, H. Zou, and K. C. Chan, The effect of the microalloying of Hf on the corrosion behavior of ZrCuNiAl bulk metallic glass, J. Alloys Compd. 399(1-2), 144-148 (2005
53. A. Dhawan, S. Roychowdhury, P. K. De, and S. K. Sharma, Potentiodynamic polarization studies on bulk amorphous alloys and Zr46.75Ti8.25Cu7.5Ni10Be27.5 and Zr65Cu17.5Ni10Al7.5, J. Non-Cryst. Solids 351(10-11), 951-955 (2005
54. F-Q. Zu, Z-H. Chen, J-J. Tao, L-J. Liu, J. Yu, and Y. Xi, Corrosion resistance of Zr-Al-Ni-Cu (Nb) bulk amorphous alloys, Trans. Nonferr. Metal. Soc. 14(5), 961-965 (2004
55. M. L. Morrison, R. A. Buchanan, A. Peker, W. H. Peter, J. A. Horton, and P. K. Liaw, Cyclic-anodic-polarization studies of a Zr41.2Ti13.8Ni10Cu12.5Be22. 5, Intermetallics 12(10-11), 1177-1181 (2004
56. U. K. Mudali, S. Baunack, J. Eckert, L. Schultz, and A. Gebert, Pitting corrosion of bulk glass-forming zirconium-based alloys, J. Alloys Compd. 377, 290-297 (2004). Corrosion Behavior 231
57. D. Zander and U. Köster, Corrosion of amorphous and nanocrystalline Zr-based alloys, Mater. Sci. Eng. A 375-377, 53-59 (2004
58. F. X. Qin, H. F. Zhang, Y. F. Deng, B. Z. Ding, and Z. Q. Hu, Corrosion resistance of Zrbased bulk amorphous alloys containing Pd, J. Alloys Compd. 375(1-2), 318-323 (2004
59. F. X. Qin, H. F. Zhang, P. Chen, F. F. Chen, D. C. Qiao, and Z. Q. Hu, Corrosion behavior of bulk amorphous Zr55Al10Cu30Ni5&xPdx alloys, Mater. Lett. 58(7-8), 1246-1250 (2004
60. S. J. Pang, T. Zhang, K. Asami, and A. Inoue, Formation, corrosion behavior, and mechanical properties of bulk glassy Zr-Al-Co-Nb alloys, J. Mater. Res. 18(7), 1652-1658(2003
61. T. C. Chieh, J. Chu, C. T. Liu, and J. K. Wu, Corrosion of Zr52.2Cu17.9Ni14.6Al10Ti5 bulk metallic glasses in aqueous solutions, Mater. Lett. 57(20), 3022-3025 (2003
62. S. Hiromoto, A. P. Tsai, M. Sumita, and T. Hanawa, Polarization behavior of bulk Zrbase amorphous alloy immersed in cell culture medium, Mater. Trans. 43(12), 3112-3117 (2002
63. V. R. Raju, U. Kühn, U. Wolff, F. Schneider, J. Eckert, R. Reiche, and A. Gebert, Corrosion behaviour of Zr-based bulk glass-forming alloys containing Nb or Ti, Mater. Lett. 57(1), 173-177 (2002
64. S. Hiromoto, K. Asami, A. P. Tsai, M. Sumita, and T. Hanawa, Surface composition and anodic polarization behavior of zirconium-based amorphous alloys in a phosphatebuffered saline solution, J. Electrochem. Soc. 149(4), B117-B122 (2002
65. U. Wolff, A. Gebert, J. Eckert, and L. Schultz, Effect of surface pretreatment on the electrochemical activity of a glass-forming Zr-Ti-Al-Cu-Ni alloy, J. Alloys Compd. 346(1-2), 222-229 (2002
66. S. Hiromoto and T. Hanawa, Re-passivation current of amorphous Zr65Al7.5Ni10Cu17.5 alloy in a Hanks' balanced solution, Electrochim. Acta 47(9), 1343-1349 (2002
67. A. Gebert, K. Buchholz, A. M. El-Aziz, and J. Eckert, Hot water corrosion behaviour of Zr-Cu-Al-Ni bulk metallic glass, Mater. Sci. Eng. A 316(1-2), 60-65 (2001
68. G. He, Z. Bian, and G. L. Chen, Corrosion behavior of a Zr-base bulk glassy alloy and its crystallized counterparts, Mater. Trans. 42(6), 1109-1111 (2001
69. S. J. Pang, T. Zhang, H. Kimura, K. Asami, and A. Inoue, Corrosion behavior of Zr-(Nb-)Al-Ni-Cu glassy alloys, Mater. Trans. 41(11), 1490-1494 (2000
70. S. Hiromoto, A. P. Tsai, M. Sumita, and T. Hanawa, Effects of surface finishing and dissolved oxygen on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution, Corros. Sci. 42(12), 2167-2185 (2000
71. S. Hiromoto, A. P. Tsai, M. Sumita, and T. Hanawa, Effect of chloride ion on the anodic polarization behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution, Corros. Sci. 42(9), 1651-1660 (2000
72. A. Gebert, K. Buchholz, A. Leonhard, K. Mummert, J. Eckert, and L. Schultz, Investigations on the electrochemical behaviour of Zr-based bulk metallic glasses, Mater. Sci. Eng. A 267(2), 294-300 (1999
73. V. Schroeder, C. J. Gilbert, and R. O. Ritchie, Comparison of the corrosion behavior of a bulk amorphous metal, Zr41.2Ti13.8Cu12.5Ni10Be22, with its crystallized form, Scripta Mater. 38(10), 1481-1485 (1998
74. A. Gebert, K. Mummert, J. Eckert, L. Schultz, and A. Inoue, Electrochemical investigations on the bulk glass forming Zr55Cu30Al10Ni5 alloy, Mater. Corros. 48(5), 293-297(1997
75. K. Asami, Y. Murakami, H. M. Kimura, and M. Kikuchi, Characterization of amorphous Zr-Cu alloy surfaces by electron-probe microanalysis and auger-electron spectroscopy, Sci. Rep. Res. Tohoku A 41(1), 77-81 (1995). 232 Chapter 8
76. G. K. Dey, R. T. Savalia, S. K. Sharma, and S. K. Kulkarni, Corrosion studies on amorphous and crystalline Zr67Ni33, Corros. Sci. 29(7), 823-831 (1989
77. M. L. Morrison, R. A. Buchanan, O. N. Senkov, D. B. Miracle, and P. K. Liaw, Electrochemical behavior of Ca-based bulk metallic glasses, Metall. Mater. Trans. A 37(4), 1239-1245 (2006
78. A. Gebert, R. V. Subba Rao, U. Wolff, S. Baunack, J. Eckert, and L. Schultz, Corrosion behaviour of the Mg65Y10Cu15Ag10 bulk metallic glass, Mater. Sci. Eng. A 375-377, 280-284 (2004
79. A. Gebert, U. Wolff, A. John, J. Eckert, and L. Schultz, Stability of the bulk glassforming Mg65Y10Cu25 alloy in aqueous electrolytes, Mater. Sci. Eng. A 299(1-2), 125-135 (2001
80. A. Gebert, U. Wolff, A. John, and J. Eckert, Corrosion behaviour of Mg65Y10Cu25 metallic glass, Scripta Mater. 43(3), 279-283 (2000
81. X. H. Lin and W. L. Johnson, Formation of Ti-Zr-Cu-Ni bulk metallic glasses, J. Appl. Phys. 78(11), 6514-6519 (1995
82. A. Inoue, W. Zhang, T. Zhang, and K. Kurosaka, High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternary systems, Acta Mater. 49(14), 2645-2652(2001
83. A. Inoue, W. Zhang, T. Zhang, and K. Kurosaka, Thermal and mechanical properties of Cu-based Cu-Zr-Ti bulk glassy alloys, Mater. Trans. 42(6), 1149-1151 (2001).
84. A. Inoue, W. Zhang, T. Zhang, and K. Kurosaka, Thermal and mechanical properties of Cu-based Cu-Zr-Tl bulk glassy alloys, Mater. Trans. 43(11), 2921-2925 (2002
85. M. Naka, K. Hashimoto, and T. Masumoto, Corrosion resistivity of amorphous Fe alloys containing Cr, J. Jpn. Inst. Metals 38(9), 835-841 (1974
86. M. Naka, K. Hashimoto, and T. Masumoto, High corrosion resistance of Cr-bearing amorphous Fe alloys in neutral and acidic solutions containing chloride, Corrosion 32(4), 146-152 (1976
87. M. Naka, K. Hashimoto, and T. Masumoto, Effect of metalloidal elements on corrosion resistance of amorphous iron-chromium alloys, J. Non-Cryst. Solids 28(3), 403-413(1978
88. M. Naka, K. Hashimoto, and T. Masumoto, Effect of addition of chromium and molybdenum on the corrosion behavior of amorphous Fe-20B, Co-20B and Ni-20B alloys, J. Non-Cryst. Solids 34(2), 257-266 (1979
89. M. Naka, K. Hashimoto, A. Inoue, and T. Masumoto, Corrosion-resistant amorphous Fe-C alloys containing chromium and/or molybdenum, J. Non-Cryst. Solids 31(3), 347-354(1979
90. T. Masumoto and K. Hashimoto, Chemical properties of amorphous metals, Annu. Rev. Mater. Sci. 8, 215-233 (1978
91. A. Inoue, T. Zhang, and A. Takeuchi, Bulk amorphous alloys with high mechanical metal) system, Appl. Phys. Lett. 71(4), 464-466 (1997
92. T. D. Shen and R. B. Schwarz, Bulk ferromagnetic glasses prepared by flux melting and water quenching, Appl. Phys. Lett. 75(1), 49-51 (1999
93. A. Inoue, Y. Shinohara, and J. S. Gook, Thermal and magnetic properties of bulk Febased glassy alloys prepared by copper mold casting, Mater. Trans. 36(12), 1427-1433(1995).
94. A. Inoue, B. L. Shen, A. R. Yavari, and A. L. Greer, Mechanical properties of Fe-based bulk glassy alloys in Fe-B-Si-Nb and Fe-Ga-P-C-B-Si systems, J. Mater. Res. 18(6), 1487-1492 (2003
95. D. C. Qiao, P. K. Liaw, C. T. Liu, M. Morrison, R. A. Buchanan, and C. R. Brooks, Unpublished
96. B-P. Zhang, A. Kawashima, H. Habazaki, K. Asami, and K. Hashimoto, The effect of structural heterogeneity on the pitting corrosion behavior of melt-spun amorphous Ni-Zr alloys, Corros. Sci. 39(10-11), 2005-2018 (1997
97. B-P. Zhang, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The corrosion behavior of amorphous Ni-Cr-P alloys in concentrated hydrofluoric acid, Corros. Sci. 33(10), 1519-1528 (1992
98. A. Inoue, T. Zhang, N. Nishiyama, K. Ohba, and T. Masumoto, Preparation of 16 mm diameter rod of amorphous Zr65Al7.5Ni10Cu17.5 alloy, Mater. Trans. 34(12), 1234-1237(1993
99. A. Peker and W. L. Johnson, A highly processable metallic-glass -Zr41.2Ti13.8Cu12.5Ni10.0Be22.5, Appl. Phys. Lett. 63(17), 2342-2344 (1993
100. X. H. Lin and W. L. Johnson, Formation of Ti-Zr-Cu-Ni bulk metallic glasses, J. Appl. Phys. 78(11), 6514-6519 (1995
101. Z. Bian, G. He, and G. L. Chen, Microstructure and mechanical properties of as-cast Zr52.5Cu17.9Ni14.6Al10Ti5 bulky glass alloy, Scripta Mater. 43(11), 1003-1008 (2000
102. J. Basu and S. Ranganathan, Bulk metallic glasses: A new class of engineering materials, Sadhana-Acad. Proc. Eng. Sci. 28, 783-798 (2003
103. A. Inoue, Bulk amorphous and nanocrystalline alloys with high functional properties, Mater. Sci. Eng. A 304-306, 1-10 (2001
104. B. A. Green, R. A. Buchanan, Y. Yokoyama, and P. K. Liaw, Unpublished
105. A. Inoue and T. Masumoto, Mg-based amorphous alloys, Mater. Sci. Eng. A 173(1-2), 1-8 (1993
106. M. Naka, K. Hashimoto, and T. Masumoto, Corrosion behavior of amorphous and crystalline Cu50Ti50 and Cu50Zr50 alloys, J. Non-Cryst. Solids 30(1), 29-36 (1978
107. J. E. Sweitzer, G. J. Shiflet, and J. R. Scully, Localized corrosion of Al90Fe5Gd5 and Al87Ni8.7Y4.3 alloys in the amorphous, nanocrystalline and crystalline states: Resistance to micrometer-scale pit formation, Electrochim. Acta 48(9), 1223-1234 (2003
108. K. Buchholz, A. Gebert, K. Mummert, J. Eckert, and L. Schultz, Corrosion behaviour of bulk amorphous and crystalline Zr55Al10Cu30Ni5 alloys at ambient and elevated temperature, Mater. Sci. Forum 343-346, 213-218 (2000
109. H. J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The corrosion behavior of amorphous and crystalline Ni-10Ta-20P alloys in 12 M HCl, Corros. Sci. 38(8), 1269-1279 (1996
110. H. Bala and S. Szymura, Acid corrosion of amorphous and crystalline Cu-Zr alloys, Appl. Surf. Sci. 35(1), 41-51 (1988
111. H. Bala and S. Szymura, Acid corrosion behavior of amorphous and crystalline Ti75Ni20Si5 alloys, Thin Solid Films 149(2), 171-176 (1987
112. U. Köster, D. Zander, Triwikantoro, A. Rüdiger, and L. Jastrow, Environmental properties of Zr-based metallic glasses and nanocrystalline alloys, Scripta Mater. 44(8-9), 1649-1654 (2001
113. M. D. Archer, C. C. Corke, and B. H. Harji, The electrochemical properties of metallic glasses, Electrochim. Acta 32(1), 13-26 (1987
114. H. A. Bruck, A. J. Rosakis, and W. L. Johnson, The dynamic compressive behavior of beryllium bearing bulk metallic glasses, J. Mater. Res. 11(2), 503-511 (1996). 234 Chapter 8
115. B. Elsener and A. Rossi, XPS investigation of passive films on amorphous Fe-Cr alloys, Electrochim. Acta 37(12), 2269-2276 (1992
116. U. K. Mudali, U. Kuhn, J. Eckert, I. Schultz, and A. Gebert, Corrosion behaviour of zirconium based bulk metallic glasses, Trans. Indian Inst. Metals 59(1), 123-138 (2006
117. S. Baunack, U. K. Mudali, A. Gebert, and J. Eckert, Characterization of oxide layers on amorphous Zr-based alloys by Auger electron spectroscopy with sputter depth profiling, Appl. Surf. Sci. 252(1), 162-166 (2005
118. Z. Szklarska-Smialowska, Pitting Corrosion of Metals (NACE, Houston, 1986).