Corrosion studies on Fe-based amorphous alloys in simulated PEM fuel cell environment

Science and Technology of Advanced Materials

Volumn 6, Issue 3-4 SPEC. ISS., 2005, Pages 282-289

  Jayaraj, J ^a   Kim, Y C ^a   Kim, K B ^a   Seok, H K ^a   Fleury, E ^a  

^a Korea Institute of Science and Technology   (South Korea)

Author keywords

Amorphous material; Bipolar plate; Corrosion resistance; Passive layer

Indexed keywords

AMORPHOUS MATERIALS; CORROSION RESISTANCE; FUEL CELLS; GRAIN BOUNDARIES; IRON; POLYELECTROLYTES; POLYMERIC MEMBRANES; STAINLESS STEEL;

BIPOLAR PLATE; CORROSION PROPERTIES; PASSIVE LAYER; POLYMER ELECTROLYTE MEMBRANE;

AMORPHOUS ALLOYS;

EID: 23944486355     PISSN: 14686996     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.stam.2005.02.019     Document Type: Conference Paper

References (26)

1. A. Hamnett Introduction to fuel-cell types W. Vielstich H.A. Gastiger A. Lamm Handbook of Fuel Cells vol. 1 2003 Wiley New York 36 43
2. J. Scholta, B. Rohland, V. Trapp, and U. Focken Investigation on novel low-cost graphite composite bipolar plates J. Power Sources 84 1999 231 234
3. J.S. Kim, W.H.A. Peelen, K. Hemmes, and R.C. Makkus Effect of alloying elements on the contact resistance and the passivation behaviour of stainless steels Corros. Sci. 44 2002 635 655
4. H. Wang, M.P. Brady, K.L. More, and H.M. Meyer III Thermally nitrided stainless steel for polymer electrolyte membrane fuel cell bipolar plates. Part 2: Beneficial modification of passive layer on AISI446, J.A. Turner J. Power Sources 138 2004 79 85
5. M. Li, S. Luo, C. Zeng, J. Shen, H. Lin, and C. Cao Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments Corros. Sci. 46 2004 1369 1380
6. S.J. Lee, C.H. Huang, and Y.P. Chen Investigation of PVD coating on corrosion resistance of metallic bipolar plates in PEM fuel cell J. Mater. Process Technol. 140 2003 688 693
7. D.R. Hodgson, B. May, P.L. Adcock, and D.P. Davies New lightweight bipolar plate system for polymer electrolyte membrane fuel cells J. Power Sources 96 2001 233 235
8. A. Inoue Stabilization of metallic supercooled liquid and bulk amorphous alloys Acta Mater. 48 2000 279 306
9. A. Inoue, and J.S. Gook Fe-based ferromagnetic glassy alloys with wide supercooled liquid region Mater. Trans. JIM 36 1995 1180 1183
10. T.D. Shen, and R.B. Schwarz Bulk ferromagnetic glasses prepared by flux melting and water quenching Appl. Phys. Lett. 75 1999 49 51
11. A. Inoue, and B.L. Shen Soft magnetic bulk glassy Fe-B-Si-Nb alloys with high saturation magnetization above 1.5 T Mater. Trans. JIM 43 2002 766 769
12. A. Inoue, T. Zhang, T. Itio, and A. Takeuchi New Fe-Co-Ni-Zr-B amorphous alloys with wide supercooled liquid regions and good softmagnetic properties Mater. Trans. JIM 38 1997 359 362
13. V. Ponnambalam, S.J. Poon, and G.J. Shiflet Fe-based bulk metallic glasses with diameter thickness larger than one centimeter J. Mater. Res. 19 2004 1320 1323
14. Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter Structural amorphous steels Phys. Rev. Lett. 92 2004 245503
15. S.J. Pang, T. Zhang, K. Asami, and A. Inoue Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance Corros. Sci. 44 2002 1847 1856
16. 10 alloys and their corrosion behavior J. Mater. Res. 17 2002 701 704
17. Y. Kawamura, T. Itoi, T. Nakamura, and A. Inoue Superplasticity in Fe-based metallic glass with wide supercooled liquid region Mater. Sci. Eng. A 304 2001 735 739
18. K. Shirakawa, K. Fukamichi, T. Kaneko, and T. Masumoto Electrical resistivity minima of Fe-(Ni, Co)-Zr amorphous alloys J. Phys. F: Met. Phys. 14 1984 1491 1499
19. R.L. Borup, and N.E. Vanderburgh Design and testing criteria for bipolar plate materials for PEM fuel cell applications D.H. Doughty B. Vyas J.R. Huff T. Takawara Process Mater. Res. Soc. Symp. vol. 393 1995 Material Research Society Warrendale, PA 151
20. H. Wang, and M.A. Sweikart Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells, J.A. Turner J. Power Sources 115 2003 243 251
21. H. Wang, and J.A. Turner Ferritic stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells J. Power Sources 128 2004 193 200
22. A.J. Sedriks Corrosion of Stainless Steel 1979 Wiley New York
23. L. Ma, S. Warthesen, and D.A. Shores Evaluation of materials for bipolar plates in PEMFCs J. New Mater. Electrochem. Syst. 3 2000 221 228
24. K.B. Oldham, and J.C. Myland Fundamentals of Electrochemical Science 1994 Academic Press California
25. D.A. Shores, and G.A. Deluga Basic materials corrosion issues W. Vielstich H.A. Gastiger A. Lamm Handbook of Fuel Cells vol. 3 2003 Wiley New York 273 285
26. C.M.A. Brett, and A.M. Brett Electrochemistry: Principles, Methods and Application 1998 Oxford University Press Oxford