메뉴 건너뛰기




Volumn 23, Issue 2-4, 1996, Pages 193-210

An efficient procedure for determining mixed-mode energy release rates in practical problems of delamination

Author keywords

[No Author keywords available]

Indexed keywords

CRACK PROPAGATION; FAILURE ANALYSIS; FINITE ELEMENT METHOD; FRACTURE MECHANICS; LAMINATED COMPOSITES; MATHEMATICAL MODELS; STRAIN RATE;

EID: 0347307220     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0168-874X(96)80007-2     Document Type: Article
Times cited : (17)

References (25)
  • 1
    • 0029324139 scopus 로고
    • An analytical crack tip element for layered elastic structures
    • B.D. Davidson, H. Hu and R.A. Schapery, "An analytical crack tip element for layered elastic structures", J. Appl. Mech. 62, pp. 294-305, 1995.
    • (1995) J. Appl. Mech. , vol.62 , pp. 294-305
    • Davidson, B.D.1    Hu, H.2    Schapery, R.A.3
  • 2
    • 0024047709 scopus 로고
    • The specified boundary stiffness/force method for finite element subregion analysis
    • C. Jara-Almonte and C. Knight, "The specified boundary stiffness/force method for finite element subregion analysis", Int. J. Numer. Methods Eng. 26, pp. 1567-1578, 1988.
    • (1988) Int. J. Numer. Methods Eng. , vol.26 , pp. 1567-1578
    • Jara-Almonte, C.1    Knight, C.2
  • 3
    • 0025767427 scopus 로고
    • Iterative global/local finite element analysis
    • J.D. Whitcomb, "Iterative global/local finite element analysis", Comput. Struct. 40, pp. 1027-1031, 1991.
    • (1991) Comput. Struct. , vol.40 , pp. 1027-1031
    • Whitcomb, J.D.1
  • 4
    • 0027663018 scopus 로고
    • Application of iterative global/local finite element analysis Part 1: Linear analysis
    • J.D. Whitcomb and K. Woo, "Application of iterative global/local finite element analysis Part 1: Linear analysis", Comm. Numer. Methods Eng. 9, pp. 745-756, 1993.
    • (1993) Comm. Numer. Methods Eng. , vol.9 , pp. 745-756
    • Whitcomb, J.D.1    Woo, K.2
  • 5
    • 0028740861 scopus 로고
    • Prediction of delamination growth in laminated structures
    • G.A. Kardomateas and Y.D.S. Rajapakse (eds.) American Society of Mechanical Engineers
    • B.D. Davidson, "Prediction of delamination growth in laminated structures", in: G.A. Kardomateas and Y.D.S. Rajapakse (eds.) Failure Mechanics in Advanced Polymeric Composites, AMD-Vol. 196, American Society of Mechanical Engineers, pp. 43-65, 1994.
    • (1994) Failure Mechanics in Advanced Polymeric Composites , vol.196 AMD , pp. 43-65
    • Davidson, B.D.1
  • 7
    • 84970113378 scopus 로고
    • Strain-energy release rate analysis of plates with postbuckled delaminations
    • J.D. Whitcomb and K.N. Shivakumar, "Strain-energy release rate analysis of plates with postbuckled delaminations", J. Composite Mater. 23, pp. 714-734, 1989.
    • (1989) J. Composite Mater. , vol.23 , pp. 714-734
    • Whitcomb, J.D.1    Shivakumar, K.N.2
  • 8
    • 0029386240 scopus 로고
    • Prediction of energy release rate for edge delamination using a crack tip element approach
    • R.H. Martin (ed.), ASTM STP 1230, American Society for Testing and Materials
    • B.D. Davidson, "Prediction of energy release rate for edge delamination using a crack tip element approach", in: R.H. Martin (ed.), 5th Symp. on Composite Materials: Fatigue and Fracture, ASTM STP 1230, American Society for Testing and Materials, pp. 155-175, 1995.
    • (1995) 5th Symp. on Composite Materials: Fatigue and Fracture , pp. 155-175
    • Davidson, B.D.1
  • 10
    • 0003249614 scopus 로고
    • Structural analysis of laminated anisotropic plates
    • J.M. Whitney, "Structural analysis of laminated anisotropic plates", Technomic, pp. 886-896, 1987.
    • (1987) Technomic , pp. 886-896
    • Whitney, J.M.1
  • 12
    • 70449655385 scopus 로고
    • Prediction of energy release rate for mixed-mode delamination using classical plate theory
    • R.A. Schapery and B.D. Davidson, "Prediction of energy release rate for mixed-mode delamination using classical plate theory", Appl. Mech. Rev. 43, pp. S281-S287, 1990.
    • (1990) Appl. Mech. Rev. , vol.43
    • Schapery, R.A.1    Davidson, B.D.2
  • 13
    • 0023979063 scopus 로고
    • Elastic fracture mechanics concepts for interfacial cracks
    • J.R. Rice, "Elastic fracture mechanics concepts for interfacial cracks", J. Appl. Mech. 55, pp. 98-103, 1988.
    • (1988) J. Appl. Mech. , vol.55 , pp. 98-103
    • Rice, J.R.1
  • 14
    • 0027701990 scopus 로고
    • Analysis of instability-related delamination growth using a crack tip element
    • B.D. Davidson and T.M. Krafchak, "Analysis of instability-related delamination growth using a crack tip element", AIAA J. 31, pp. 2130-2136, 1993.
    • (1993) AIAA J. , vol.31 , pp. 2130-2136
    • Davidson, B.D.1    Krafchak, T.M.2
  • 15
    • 0019707231 scopus 로고
    • One dimensional modeling of failure in laminated plates by delamination buckling
    • H. Chai, C.D. Babcock and W.G. Knauss, "One dimensional modeling of failure in laminated plates by delamination buckling", Int. J. Solids Struct. 17, pp. 1069-1083, 1981.
    • (1981) Int. J. Solids Struct. , vol.17 , pp. 1069-1083
    • Chai, H.1    Babcock, C.D.2    Knauss, W.G.3
  • 16
    • 84973180270 scopus 로고
    • The effects of laminated structure on delamination buckling and growth
    • W.L. Yin, " The effects of laminated structure on delamination buckling and growth", J. Composite Mater. 22, pp. 502-517, 1988.
    • (1988) J. Composite Mater. , vol.22 , pp. 502-517
    • Yin, W.L.1
  • 17
    • 0028728504 scopus 로고
    • Effect of stretching-shearing coupling on instability-related delamination growth
    • B.D. Davidson and C.H. Ferrie, "Effect of stretching-shearing coupling on instability-related delamination growth", Composite Struct. 29, pp. 383-392, 1994.
    • (1994) Composite Struct. , vol.29 , pp. 383-392
    • Davidson, B.D.1    Ferrie, C.H.2
  • 18
    • 0028737110 scopus 로고
    • Energy release rate determination for edge delamination in laminates subjected to combined in-plane, bending and hygrothermal loading - Part I: Delamination at a single interfadce
    • B.D. Davidson, "Energy release rate determination for edge delamination in laminates subjected to combined in-plane, bending and hygrothermal loading - Part I: Delamination at a single interfadce", J. Composite Mater. 28, pp. 1009-1031, 1994.
    • (1994) J. Composite Mater. , vol.28 , pp. 1009-1031
    • Davidson, B.D.1
  • 19
    • 0028729675 scopus 로고
    • Energy release rate determination for edge delamination in laminates subjected to combined in-plane, bending and hygrothermal loading - Part II: Two symmetrically located delaminations
    • B.D. Davidson, "Energy release rate determination for edge delamination in laminates subjected to combined in-plane, bending and hygrothermal loading - Part II: Two symmetrically located delaminations", J. Composite Mater. 28, pp. 1371-1392, 1994.
    • (1994) J. Composite Mater. , vol.28 , pp. 1371-1392
    • Davidson, B.D.1
  • 20
    • 0022740013 scopus 로고
    • Residual thermal and moisture influences on the strain energy release rate analysis of edge delamination
    • T.K. O'Brien, I.S. Raju and D.P. Garber, "Residual thermal and moisture influences on the strain energy release rate analysis of edge delamination", J. Composite Technol. Res., pp. 37-47, 1986.
    • (1986) J. Composite Technol. Res. , pp. 37-47
    • O'Brien, T.K.1    Raju, I.S.2    Garber, D.P.3
  • 21
    • 0023847596 scopus 로고
    • Convergence of strain energy release rate components for edge-delaminated composite laminates
    • I.S. Raju, J.H. Crews and M.A. Aminpour, "Convergence of strain energy release rate components for edge-delaminated composite laminates", Eng. Fract. Mech. 30, pp. 383-396, 1988.
    • (1988) Eng. Fract. Mech. , vol.30 , pp. 383-396
    • Raju, I.S.1    Crews, J.H.2    Aminpour, M.A.3
  • 22
    • 0027271472 scopus 로고
    • Delamination onset in polymeric composite laminates under thermal and mechanical loads
    • C.E. Harris and T.S. Gates (eds.), ASTM STP 1174, American Society for Testing and Materials
    • R.H. Martin, "Delamination onset in polymeric composite laminates under thermal and mechanical loads", in: C.E. Harris and T.S. Gates (eds.), High Temperature and Environmental Effects on Polymeric Composites, ASTM STP 1174, American Society for Testing and Materials, pp. 39-65, 1993.
    • (1993) High Temperature and Environmental Effects on Polymeric Composites , pp. 39-65
    • Martin, R.H.1
  • 23
    • 84970692230 scopus 로고
    • An analytical investigation of delamination front curvature in double cantilever beam specimens
    • B.D. Davidson, "An analytical investigation of delamination front curvature in double cantilever beam specimens", J. Composite Mater. 24, pp. 1124-1137, 1990.
    • (1990) J. Composite Mater. , vol.24 , pp. 1124-1137
    • Davidson, B.D.1
  • 24
    • 0029532170 scopus 로고
    • Three dimensional analysis and resulting design recommendations for unidirectional and multidirectional end-notched flexure tests
    • B.D. Davidson, R. Krüger and M. König, "Three dimensional analysis and resulting design recommendations for unidirectional and multidirectional end-notched flexure tests", J. Composite Mater. 29, pp. 2108-2133, 1995.
    • (1995) J. Composite Mater. , vol.29 , pp. 2108-2133
    • Davidson, B.D.1    Krüger, R.2    König, M.3
  • 25
    • 0017561766 scopus 로고
    • A finite element calculation of stress intensity factors by a modified crack closure integral
    • E.F. Rybicki and M.F. Kanninen, "A finite element calculation of stress intensity factors by a modified crack closure integral", Engineering Fract. Mech. 9, pp. 931-938, 1977.
    • (1977) Engineering Fract. Mech. , vol.9 , pp. 931-938
    • Rybicki, E.F.1    Kanninen, M.F.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.