Online planning of multiaxial loading path for elastic material identification

Computer Methods in Applied Mechanics and Engineering

Volumn 197, Issue 9-12, 2008, Pages 885-901

  Furukawa, Tomonari ^a   Michopoulos, John G ^b  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

^b NAVAL RESEARCH LABORATORY   (United States)

Author keywords

Anisotropic materials; Loading path planning; Multiaxial tests; Parameter identification; Singular value decomposition

Indexed keywords

ANISOTROPY; ELASTIC MODULI; IDENTIFICATION (CONTROL SYSTEMS); LOAD TESTING; OPTIMIZATION; SINGULAR VALUE DECOMPOSITION;

LOADING PATH PLANNING; MULTIAXIAL TESTS;

MOTION PLANNING;

ANISOTROPY; ELASTIC MODULI; IDENTIFICATION (CONTROL SYSTEMS); LOAD TESTING; MOTION PLANNING; OPTIMIZATION; SINGULAR VALUE DECOMPOSITION;

EID: 37049002684     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cma.2007.05.027     Document Type: Article

References (34)

1. Adams D.F., Carlsson L.A., and Pipes R.B. Experimental Characterization of Advanced Composite Materials (2003), CRC Press, Boca Raton, FL
2. Aveston J., and Kelly A. Theory of multiple fracture of fibrous composites. J. Mater. Sci. 8 (1973) 352-362
3. Coello C.A. A comprehensive survey of evolutionary-based multi-objective optimization techniques. Int. J. Knowledge Inf. Syst. 1 3 (1999) 269-308
4. Fonseca C.M., and Fleming P.J. An overview of evolutionary algorithms in multiobjective optimization. Int. J. Evol. Comput. 3 1 (1995) 116
5. French C.W., Schultz A.E., Hajjar J.F., Shield C.K., Ernie D.W., Dexter R.J., Du D.H.-C., and Bergson P.M. A System for multi-Axial subassemblage testing (MAST): design concepts and capabilities. Proceedings of the Seventh National Conference on Earthquake Engineering, Boston, MA, July 21-25, 2002, Paper No. NS-1a (2002), Earthquake Engineering Research Institute, Oakland, CA
6. Furukawa T., and Yagawa G. Inelastic constitutive parameter identification using an evolutionary algorithm with continuous individuals. Int. J. Numer. Methods Engrg. 40 (1997) 1071-1090
7. Furukawa T., and Yagawa G. Implicit constitutive modelling for viscoplasticity using neural networks. Int. J. Numer. Methods Engrg. 43 (1998) 195-219
8. Furukawa T., Yoshimura S., and Hoffman M. Implicit material modeling for temperature-dependent viscoplasticity using multi-layer neural networks. In: Bathe K.J. (Ed). Computational Fluid and Solid Mechanics vol. 1 (2003), Elsevier Science 280-284
9. Furukawa T., and Michopoulos J.G. Design of multi-axial tests for characterizing anisotropic materials. Int. J. Numer. Methods Engrg. (2006)
10. T. Furukawa, J.G. Michopoulos, Material characterization of composites using multi-axial testing, in: Proceedings of Regional Conference on Computational Mechanics and Numerical Analysis (CD-ROM), Banda Aceh, Indonesia, May 12-14, 2006, pp. 1-10.
11. T. Furukawa, Automatic material characterization for inelastic finite element analysis, in: 7th World Congress on Computational Mechanics (WCCM VII), Los Angeles, July 16-22, 2006, to be presented as semi-plenary speaker.
12. Galletti P.M., De Rossi D.E., and De Reggi A.S. Medical Applications of Piezoelectric Polymers (ferroelectricity and related phenomena) (1988), Gordon and Breach Science Publishers, New York
13. Golub G., and Van Loan C. Matrix Computations (1983), Johns Hopkins University Press, Baltimore
14. J. Gu, Full-field optical measurement for material parameter identification with inverse methods, in: Third International Conference on High Performance Structures and Materials (HPSM 2006), Ostend, Belgium, May, pp. 239-248.
15. Hajjar J.F., French C.W., Schultz A.E., Shield C.K., Ernie D.W., Dexter R.J., Du D.H.-C., and Bergson P.M. A System for multi-axial subassemblage testing (MAST): initial developments. Proceedings of the American Society of Civil Engineers Structures Congress, Denver, Colorado, April 4-6, 2002 (2002), ASCE, Reston, Virginia 313-314
16. Highsmith A., and Reifsnider K.L. Stiffness-reduction mechanisms in composite laminates. In: Reifsnider K.L. (Ed). SPT775 Damage in Composite Materials (1982), ASTM, Philadelphia, PA 103-117
17. Kalluri S., and Bonacuse P.J. Multiaxial Fatigue and Deformation: Testing and Prediction (2000), American Society for Testing and Materials, Philadelphia, PA
18. D. Lecompte, H. Sol, J.D. Vantomme, A.M. Habraken, Identification of elastic orthotropic material parameters based on ESPI measurements, in: 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, University of Ljubljana, June 07-09, 2005.
19. D. Lecompte, T. Lauwagie, H. Sol, J. Vantomme, Elastic orthotropic parameter identification by inverse modeling of biaxial tests using Digital Image Correlation, in: 8th European Mechanics of Materials Conference, September, 2005.
20. D. Lecompte, T. Lauwagie, H. Sol, W. Heylen, J. Vantomme, A comparison between static and dynamic inverse modeling for the identification of orthotropic elastic material parameters, Mater. Charact., in preparation.
21. Lee C.J.K., Furukawa T., and Yoshimura S. A human-like numerical technique for engineering design. Int. J. Numer. Methods Engrg. (2005) 1915-1943
22. P.W. Mast, G.E. Nash, J.G. Michopoulos, R. Thomas, R. Badaliance, I. Wolock, Experimental determination of dissipated energy density as a measure of strain-induced damage in composites, Technical Report, NRL/FR/6383-92-9369, Naval Research Laboratory, 1992.
23. Mast P.W., Nash G.E., Michopoulos J.G., Thomas R., Badaliance R., and Wolock I. Characterization of strain-induced damage in composites based on the dissipated energy density. Theoret. Appl. Fract. Mech. 22 (1995) 71-125
24. Miller K.J., and Brown M.W. Multiaxial Fatigue (1985), American Society for Testing and Materials, Ann Arbor, MI
25. Park J.B., and Bronzino J.D. Biomaterials: Principles and Applications (2003), CRC Press, Boca Raton, FL
26. Persson P.-O., and Strang G. A simple mesh generator in MATLAB. SIAM Rev. 46 2 (2004) 329-345
27. A.F. Rauch, S.M. Sargand, G.A. Hazen, Determination of hyperbolic soil model parameters for sand using multiaxial device, in: 3rd International Symposium on Numerical Models in Geomechanics, Niagara Falls, Canada, May, 1988, pp. 272-280.
28. Staab G.H. Laminar Composites (1999), Butterworth-Heinemann, Boston
29. Tsai S.W., and Hahn H.T. On the behavior of composite laminates after initial failures. J. Compos. Mater. 8 (1974) 288-305
30. H. Vlieger, H.H. Ottens, Uniaxial and biaxial tests on rivetted fuselage lap joint specimens, DOT/FAA/AR-98/33, Office of Aviation Research, Washington, DC, 1998.
31. J.S. Welsh, D.F. Adams, Development of a true triaxial testing facility for composite materials, UW-CMRG-R-99-102, Composite Materials Research Group, University of Wyoming, Laramie, Wyoming, 1999.
32. Welsh J.S., and Adams D.F. Development of an electromechanical triaxial test facility for composite materials. Exp. Mech. 40 3 (2000) 312-320
33. Welsh J.S., and Adams D.F. Biaxial and triaxial failure strengths of 6061-T6 aluminum and AS4/3501-6 carbon/epoxy laminates obtained by testing thickness-tapered cruciform specimens. J. Compos. Mater. 23 2 (2001) 1-11
34. Welsh J.S., Mayes J.S., Key C.T., and McLaughlin R.N. Comparison of MCT failure prediction techniques and experimental verification for biaxially loaded glass fabric-reinforced composite laminates. J. Compos. Mater. 38 24 (2004) 2165-2181