The influence of dentin and/or metal surface treatment on the retention of cemented crowns in teeth with an increased taper

Dental Materials

Volumn 24, Issue 8, 2008, Pages 1058-1064

  Pilo, Raphael ^a   Lewinstein, Israel ^a   Ratzon, Tal ^a   Cardash, Harold S ^a   Brosh, Tamar ^a  

^a TEL AVIV UNIVERSITY   (Israel)

Author keywords

Bonding; Cast crown; Dentin; Metal; Tribochemical treatment

Indexed keywords

ATMOSPHERIC HUMIDITY; SURFACE TREATMENT; THERMAL CYCLING; ZINC COMPOUNDS;

CAST CROWN; TRIBOCHEMICAL TREATMENT;

DENTISTRY;

ALUMINUM OXIDE; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; COMPOLUTE; DENTAL ALLOY; DENTIN BONDING AGENT; MACROGOL DERIVATIVE; POLYMETHACRYLIC ACID DERIVATIVE; RELYX ARC; RESIN CEMENT; SILANE DERIVATIVE; SILICIC ACID; SINGLE BOND; ZINC PHOSPHATE;

ARTICLE; CEMENTATION; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL ETCHING; DENTAL SURGERY; DENTIN; HISTOLOGY; HUMAN; HUMIDITY; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; RANDOMIZED CONTROLLED TRIAL; SURFACE PROPERTY; TEMPERATURE; TIME; TOOTH CROWN; TOOTH PROSTHESIS;

ACID ETCHING, DENTAL; ALUMINUM OXIDE; BISPHENOL A-GLYCIDYL METHACRYLATE; CEMENTATION; CROWNS; DENTAL ALLOYS; DENTAL BONDING; DENTAL ETCHING; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTIN; DENTIN-BONDING AGENTS; HUMANS; HUMIDITY; MATERIALS TESTING; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SILANES; SILICIC ACID; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; TOOTH PREPARATION, PROSTHODONTIC; ZINC PHOSPHATE CEMENT;

EID: 45049088829     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2007.12.002     Document Type: Article

References (50)

1. Jorgensen K.D. The relationship between retention and convergence angle in cemented veneer crowns. Acta Odontol Scand 13 (1955) 35-40
2. Kaufman G.E., Coelho H.D., and Colin L. Factors influencing the retention of cemented gold castings. J Prosthet Dent 11 (1961) 487-502
3. Tylman S.D., and Malone W.F.P. Tylman's theory and practice of fixed prosthodontics. 7th ed. (1978), CV Mosby, St. Louis p. 103
4. Shillingburg H.J., Hobo S., Whitsett L.D., Jacobi R., and Brackett S.E. Fundamentals of fixed prosthodontics. 3rd ed. (1997), Quintessence Publishing Co. Inc., Chicago p. 120
5. Rosensteil S.F., Land M.F., and Fujimoto J. Contemporary fixed prosthodontics. 3rd ed. (2001), CV Mosby Inc., St. Louis p. 154
6. Dykema R.A., Goodacre C.I., and Phillips R.W. Johnston's modern practice in fixed prosthodontics. 4th ed. (1986), WB Saunders Co., Philadelphia p. 24
7. Nordlander J., Weir D., Stoffer W., and Ochi S. The taper of clinical preparations for fixed prosthodontics. J Prosthet Dent 60 (1988) 148-151
8. Ohm E., and Silness J. The convergence angle in teeth prepared for artificial crowns. J Oral Rehabil 5 (1978) 371-375
9. Mack P.J. A theoretical and clinical investigation into the taper achieved on crown and inlay preparations. J Oral Rehabil 7 (1980) 255-265
10. Chan D.C.N., Wilson Jr. A.H., Barbe P., Cronin Jr. R.J., Chung C., and Chung K. Effect of preparation convergence on retention and seating discrepancy of complete veneer crowns. J Oral Rehabil 32 (2005) 58-64
11. Goodacre C.J., Campagni W.V., and Aquilino S.A. Tooth preparations for complete crowns: an art form based on scientific principles. J Prosthet Dent 85 (2001) 363-376
12. Cameron S.M., Morris W.J., Keesee S.M., Barsky T., and Parker M.H. The effect of preparation taper on the retention of cemented cast crowns under lateral fatigue loading. J Prosthet Dent 95 (2006) 456-461
13. Proussaefs P., Campagni W., Bernal G., Goodacre C., and Kim J. The effectiveness of auxiliary features on a tooth preparation with inadequate resistance form. J Prosthet Dent 91 (2004) 33-41
14. Trier A.C., Parker M.H., Cameron S.M., and Brousseau J.S. Evaluation of resistance form of dislodged crowns and retainers. J Prosthet Dent 80 (1998) 405-409
15. Ergin S., and Gemalmaz D. Retentive properties of five different luting cements on base and noble metal copings. J Prosthet Dent 88 (2002) 491-497
16. Anusavice K.J. Phillips' science of dental materials. 10th ed. (1996), WB Saunders Co., Philadelphia p. 566
17. Fonseca R.G., Dos Santos Cruz C.A., Abado G.L., and Vaz L.G. Comparison of the tensile bond strengths of cast metal crowns luted with resin cements. J Oral Rehabil 31 (2004) 1080-1084
18. Wanatabe F., Powers J.M., and Lorey R.E. In vitro bonding of prosthodontic adhesives to dental alloys. J Dent Res 67 (1988) 479-483
19. Aquilino S.A., Diaz-Arnold A.M., and Piotrowski T.J. Tensile fatigue limits of prosthodontic adhesives. J Dent Res 70 (1991) 208-210
20. Zidan O., and Ferguson G.C. The retention of complete crowns prepared with three different tapers and luted with four different cements. J Prosthet Dent 89 (2003) 565-571
21. Browning W.D., Nelson S.K., Cibrika R., and Myers M.L. Comparison of luting cements for minimally retentive crown preparation. Quintessence Int 33 (2002) 95-100
22. Ayad M.F., Rosenstiel S.F., and Salama M. Influence of tooth surface roughness and type of cement on retention of complete cast crowns. J Prosthet Dent 77 (1997) 116-121
23. Mitchell C.A., Abbariki M., and Orr J.F. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coverage crowns. Dent Mater 16 (2000) 198-206
24. Kourtis S.G. Bond strengths of resin-to-metal bonding systems. J Prosthet Dent 78 (1997) 136-145
25. Ozcan M., Alkumru H.N., and Germalmaz D. The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 14 (2001) 335-339
26. Sun R., Suansuwan N., Kilpatrick N., and Swain M. Characterisation of tribo-chemically assisted bonding of composite resin to porcelain and metal. J Dent 28 (2000) 441-445
27. Kern M., and Thompson V.P. Sandblasting and silica-coating of dental alloys: volume loss, morphology and changed in the surface composition. Dent Mater 9 (1993) 151-161
28. Ozcan M., and Niedermeier W. Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs. Int J Prosthodont 15 (2002) 299-302
29. Haselton D.R., Diaz-Arnold A.M., and Dunne J.T. Shear bond strengths of 2 intraoral porcelain repair systems to porcelain or metal substrates. J Prosthetic Dent 86 (2001) 526-531
30. Frankenberger R., Kramer N., and Sindel J. Repair strength of etched vs. silica-coated metal-ceramic and all-ceramic restorations. Oper Dent 25 (2000) 209-215
31. Cobb D.S., Vargas M.A., Fridrich T.A., and Bouschlicher M.R. Metal surface treatment: characterization and effect of composite-to-metal bond strength. Oper Dent 25 (2000) 427-433
32. Xible A.A., de Jesus Tavarez R.R., de Araujo Codos R., and Bonachela W.C. Effect of silica coating and silanization on flexural and composite-resin bond strengths of zirconia posts: an in vitro study. J Prosthet Dent 95 (2006) 224-229
33. Sahafi A., Peutzfeldt A., Asmussen E., and Gotfredsen K. Retention and failure morphology of prefabricated posts. Int J Prosthodont 17 (2004) 307-312
34. Sahafi A., Peutzfeldt A., Ravnholt G., Asmussen E., and Gotfredsen K. Resistance to cyclic loading of teeth restored with posts. Clin Oral Invest 9 (2005) 84-90
35. Assif D., Pilo R., and Marshak B. Restoring teeth following crown lengthening procedures. J Prosthet Dent 65 (1991) 62-64
36. Proussaefs P. Crowns cemented on crown preparation lacking geometric resistance form. Part II: effect of cement. J Prosthodont 13 (2004) 36-41
37. Wiskott H.W., Belser U.C., and Scherrer S.S. The effect of film thickness and surface texture on the resistance of cemented extracoronal restorations to lateral fatigue loading. Int J Prosthodont 12 (1999) 255-262
38. Schmage P., Sohn J., Ozcan M., and Nergiz I. Effect of surface treatment of titanium posts on the tensile bond strength. Dent Mater 22 (2006) 189-194
39. Diaz-Arnold A.M., Vargas M.A., and Haselton D.R. Current status of luting agents for fixed prosthodontics. J Prosthet Dent 81 (1999) 135-141
40. Uy J.N., Lian J.N., Nicholls J.I., and Tan K.B. Load-fatigue performance of gold crowns luted with resin cements. J Prosthet Dent 95 (2006) 315-322
41. El-Mowafy O.M., Fenton A.H., Forrester N., and Milenkovic M. Retention of metal ceramic crowns cemented with resin cements: effects of preparation taper and height. J Prosthet Dent 76 (1996) 524-529
42. Consani S., Santos J.G., Correr Sobrinho L., Sinhoreti M.A., and Sousa-Neto M.D. Effect of cement types on the tensile strength of metallic crowns submitted to thermocycling. Braz Dent J 14 (2003) 193-196
43. Rosenstiel S.F., Land M.F., and Crispin B.J. Dental luting agents: a review of the current literature. J Prosthet Dent 80 (1998) 280-301
44. Brukl C.E., Nicholson J.W., and Norling B.K. Crown retention and seating on natural teeth with a resin cement. J Prosthet Dent 53 (1985) 618-622
45. Ernst C.P., Wenzl N., Stender E., and Willershauson B. Retentive strength of cast gold crowns using glass ionomer, compomer or resin cement. J Prosthet Dent 79 (1998) 472-476
46. Chung K.H., and Hwang Y.C. Bonding strengths of porcelain repair systems with various surface treatments. J Prosthet Dent 78 (1997) 267-274
47. Smith R.M., Barrett M.G., Gardener W.A., Marshall T., McLean M.J., McMichael D.W., et al. Effect of environmental stress and surface treatment on resin to metal bonding. Am J Dent 6 (1993) 111-115
48. Anagnostopoulos T., Eliades G., and Palaghias G. Composition, reactivity and surface interactions of three dental silane primers. Dent Mater 9 (1993) 182-190
49. Peutzfeldt A., and Asmussen A. Silicoating: evaluation of a new method of bonding composite resin to metal. Scand J Dent Res 96 (1988) 171-176
50. Ekstrand K., Ruyter I.E., and Oysaed H. Adhesion to titanium of methacrylate-based polymer materials. Dent Mater 4 (1988) 111-115