Combining geometric constraints with physics modeling for virtual assembly using SHARP

2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007

Volumn 2 PART B, Issue , 2008, Pages 1045-1055

  Seth, Abhishek ^a   Vance, Judy M ^b   Oliver, James H ^a  

^a Iowa State University   (United States)

^b NATIONAL SCIENCE FOUNDATION   (United States)

Author keywords

Constraint Based Modeling; Human Computer Interaction; Physics Based Modeling; Virtual Assembly; Virtual Prototyping; Virtual Reality

Indexed keywords

CAD MODELING; CASE STUDIES; CONSTRAINT-BASED; DATA REPRESENTATIONS; GEOMETRIC CONSTRAINTS; INTERNATIONAL DESIGNS; MANUAL ASSEMBLY; PROTOTYPING; RUN TIME; TECHNICAL CONFERENCES; VIRTUAL ASSEMBLY; VIRTUAL ASSEMBLY SIMULATIONS; VIRTUAL ENVIRONMENT (VE);

ARCHITECTURAL DESIGN; COMPUTER AIDED DESIGN; COMPUTER NETWORKS; COMPUTERS; ENGINEERING; GEOMETRY; MATHEMATICAL MODELS; PHYSICS; SOFTWARE PROTOTYPING; TECHNOLOGY;

VIRTUAL REALITY;

EID: 44849137462     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2007-34681     Document Type: Conference Paper

References (44)

1. Boothroyd, G., and Dewhurst, P., Product Design for Assembly. 1989, New York: McGraw-Hill, Inc.
2. Fröhlich, B., Tramberend, H., Beers, A., Agarawala, M. and Baraff, D. Physically-Based Modeling on the Responsive Workbench. in IEEE Virtual Reality Conference. 2000.
3. Seth, A., Su, H. J., and Vance, J. M. SHARP: A System for Haptic Assembly & Realistic Prototyping. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2006/CIE-99476). 2006. Philadelphia, PA, USA.
4. Kuehne, R., and Oliver, J. A Virtual Environment for Interactive Assembly Planning and Evaluation. Proceedings of ASME Design Automation Conference. 1995. Boston, MA., USA.
5. Pere, E., Langrana, N., Gomez, D., and Burdea, G. Virtual Mechanical Assembly on a PC-Based System. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC1996/DFM-1306). 1996. Irvine, CA.
6. Ye, N., Banerjee, P., Banerjee, A., and Dech, F., A Comparative Study of Virtual Assembly Planning in Traditional and Virtual Environments. IEEE Transactions on Systems, Man, and Cybernetics - Part C: Applicaitons and Review, 1999. 29(4): p. 546 - 555.
7. Cruz-Neira, C., Sandin, D., and DeFanti, T., Surround-Screen Projection-Based Virtual Reality: The Design and Implementation of the CAVE. Proceedings of SIGGRAPH 493, 1993: p. 135-142.
8. Cruz-Neira, C., Sandin, D.J., DeFanti, T.A., Kenyon, R., and Hart, J.C., The CAVE, Audio Visual Experience Automatic Virtual Environment. Communications of the ACM, 1992: p. 64-72.
9. Dewar, R.G., Carpenter, I.D., Ritchie, J.M., and Simmons, J.E.L. Assembly Planning in a Virtual Environment. Proceedings of Portland International Conference on management of Engineering and Technology (PICMET 97). 1997. Portland, OR: IEEE Press.
10. Ritchie, J.M., Dewar, R.G. and Simmons, J.E.L., The Generation and Practical use of Plans for Manual Assembly using Immersive Virtual Reality. Proceedings of the I MECH E Part B Journal of Engineering, 1999. 213(5): p. 461-474.
11. Ritchie, J.M., Simmons, J.E.L., Carpenter, I.D. and Dewar., R.G. Using Virtual Reality for Knowledge Elicitation in a Mechanical Assembly Planning Environment. Proceedings of 12th Conference of the Irish Manufacturing Committee. 1995.
12. Gomes de sa, A, and Zachmann, G., Virtual Reality as a Tool for Verification of Assembly and Maintenance Processes. Computers and Graphics, 1999. 23: p. 189-403.
13. Gupta, R., and Zeltzer, D. Prototyping and Design for Assembly Analysis using Multimodal Virtual Environments. Proceedings of ASME Computers in Engineering Conference and the Engineering Database Symposium. 1995. Boston, MA.
14. Gupta, R., Whitney, D., and Zeltzer, D., Prototyping and Design for Assembly Analysis using Multimodal Virtual Environments. Computer Aided Design (Special issue on VR in CAD), 1997. 29(8): p. 585-597.
15. Sensable Technologies (http://www.sensable.com/).
16. Coutee, A.S., McDermott, S. D., and Bras, B., A Haptic Assembly and Disassembly Simulation Environment and Associated Computational Load Optimization Techniques. ASME Transactions - Journal of Computing & Information Science in Engineering, 2001. 1(2): p. 113-122.
17. Coutee, A.S., and, Bras, B. Collision Detection for Virtual Objects in a Haptic Assembly and Disassembly Simulation Environment. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2002/CIE-34385). 2002. Montreal, Canada.
18. Baraff, D., Interactive Simulation of Solid Rigid Bodies. Computer Graphics and Applications, 1995. 15(3): p. 63-75.
19. Krüger, W., and Fröhlich. B., The Responsive Workbench. Computer Graphics and Applications, 1994. 14(3): p. 12-15.
20. Kim, C.E., and Vance, J.M. Using Vps (Voxmap Pointshell) As The Basis For Interaction in a Virtual Assembly Environment. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2003/CIE-48297). 2003. Chicago, IL.: ASME.
21. Kim, C.E., and Vance, J.M., Collision Detection and Part Interaction Modeling to Facilitate Immersive Virtual Assembly Methods. ASME Journal of Computing and Information Sciences in Engineering, 2004. 4(1): p. 83-90.
22. McNeely, W.A., Puterbaugh, K. D. and Troy, J. J. Six Degree-of-Freedom Haptic Rendering Using Voxel Sampling. SIGGRAPH 99 Conference Proceedings, Annual Conference Series. 1999. Los Angles, CA.
23. Johnson, T.C., and, Vance, J. M. The Use of the Voxmap Pointshell Method of Collision Detection in Virtual Assembly Methods Planning. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2001/DAC-21137). 2001. Pittsburgh, PA.
24. Kim, C.E., and Vance, J.M. Development of a Networked Haptic Environment in VR to Facilitate Collaborative Design Using Voxmap Pointshell (VPS) Software. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2004/CIE-57648). 2004. Salt Lake City, UT.
25. Jayaram, S., Jayaram, U., Wang, Y., Tirumali, H., Lyons, K. and, Hart, P., VADE: A Virtual Assembly Design Environment. Computer Graphics and Applications, 1999. 19(6): p. 44-50.
26. Jayaram, S., Connacher, H. I., and Lyons K.W., Virtual Assembly using Virtual Reality Techniques. Computer Aided Design, 1997. 29(8): p. 575-584.
27. Jayaram, U., Tirumali, H. and, Jayaram, S. A Tool/Part/Human Interaction Model for Assembly in Virtual Environments. ASME Design Engineering Technical Conferences 2000 (DETC 2000/CIE-14584). 2000. Baltimore, MD.
28. Taylor, F., Jayaram, S. and, Jayaram, U. Functionality to Facilitate Assembly of Heavy Machines in a Virtual Environment. ASME Design Engineering Technical Conferences (DETC 2000/CIE-14590). 2000. Baltimore, MD.
29. Jayaram, S., Jayaram, U., Wang, Y., and Lyons, K. CORBA-based Collaboration in a Virtual Assembly Design Environment. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2000/CIE-14585). 2000. Baltimore, MD.
30. Czernuszenko, M., Pape, D., Sandin, D., DeFanti, T., Dawe, G. L., and Brown, M. D., ImmersaDesk and Infinity Wall Projection-Based Virtual Reality Displays. Computer Graphics, 1997. 31(2): p. 46-49.
31. Wang, Y., Jayaram, S., Jayaram, U., and Lyons, K. Physically Based Modeling in Virtual Assembly. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2001/CIE-21259). 2001. Pittsburg, PA.
32. Shaikh, I., Jayaram, U., Jayaram, S., and Palmer, C. Participatory Ergonomics Using VR Integrated with Analysis Tools. 2004 Winter Simulation Conference. 2004. Washington D.C.
33. Jayaram, U., Jayaram, S., Shaikh, I., Kim, Y., and Palmer, C., Introducing Quantitative Analysis Methods into Virtual Environments for Real-Time and Continuous Ergonomic Evaluations. Computers in Industry, 2006. 57(3): p. 283-296.
34. Marcelino, L., Murray, N., and, Fernando, T., A Constraint Manager to Support Virtual Maintainability. Computers & Graphics, 2003. 27(1): p. 19-26.
35. Murray, N., and Fernando, T. An Immersive Assembly and Maintenance Simulation Environment. Eighth IEEE International Symposium on Distributed Simulation and Real-TIme Applications. 2004.
36. Murray, N., and Fernando, T. Development of a an Immersive Assembly and Maintenance Simulation Environment. International Conference on Advanced Research in Virtual and Rapid Prototyping. 2003. Leiria, Portugal.
37. Wan, H., Gao, S., Peng, Q., Dai, G and Zhang, F. MIVAS: A Multi-Modal Immersive Virtual Assembly System. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2004/CIE-57660). 2004. Salt Lake City, UT.
38. Gottschalk, S., Lin, M. C. and Manocha, D. OBBTree: A Hierarchical Structure for Rapid Interference Detection. 23rd Annual Conference on Computer Graphics and Interactive Techniques. 1996.
39. Liu, Z., and Tan, J. Virtual Assembly and Tolerance Analysis for Collaborative Design. in 9th International Conference on Computer Supported Cooperative Work in Design 2005. 2005. Coventry, United Kingdom.
40. Chen, X., Xu, N., and Li, Y. A Virtual Environment for Collaborative Assembly. Second International Conference on Embedded Software and Systems (ICESS'05). 2005.
41. McDermott, S.D., and, Bras, B. Development of a Haptically Enabled Dis/Re-Assembly Simulation Environment. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC1999/CIE-9035). 1999. Las Vegas, NV.
42. Just, C., A. Bierbaum, A. Baker, and, C. Cruz-Neira, VR Juggler: A Framework for Virtual Reality Development, 2nd Immersive Projection Technology Workshop (IPT98) CD-ROM. 1998: Ames, IA.
43. Barco Baron (http://www.barco.com/entertainment/en/products/product. asp?element=1192).
44. Seth, A., Su, H. J., and Vance, J. M. A Desktop Networked Haptic VR Interface for Mechanical Assembly. ASME International Mechanical Engineering Congress & Exposition (IMECE2005-81873). 2005. Orlando, FL, USA.