Chapter 3 Tribology of the tool-chip and tool-workpiece interfaces

Tribology and Interface Engineering Series

Volumn 52, Issue , 2006, Pages 124-219

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

EID: 44349193360     PISSN: 15723364     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0167-8922(06)80005-2     Document Type: Article

References (136)

1. Merchant M.E. Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip. Journal of Applied Physics 16 (1945) 267-275
2. Zorev N.N. Metal Cutting Mechanics (1966), Pergamon Press, Oxford
3. Dieter G. Mechanical Metallurgy (1976), McGraw-Hill, New York
4. Kronenberg M. Machining Science and Application. Theory and Practice for Operation and Development of Machining Processes (1966), Pergamon Press, Oxford
5. Armarego E.J., and Brown R.H. The Machining of Metals (1969), Prentice Hall, New Jersey, US
6. Finnie I., and Shaw M.C. The friction process in metal cutting. Transactions of ASME 77 (1956) 1649-1657
7. Usui E., and Takeyma H. A photoelastic analysis of machining stresses. ASME Journal of Engineering for Industry 81 (1960) 303-308
8. Strenkowski J.S., and Moon K.-J. Finite element prediction of chip geometry and tool/workpiece temperature distributions in orthogonal metal cutting. ASME Journal of Engineering for Industry 112 (1990) 313-318
9. Komvopoulos K., and Erpenbeck S.A. Finite element modeling of orthogonal metal cutting. ASME Journal of Engineering for Industry 113 (1991) 253-267
10. Lin Z.C., Pan W.C., and Lo S.P. A study of orthogonal cutting with tool flank wear and sticking behaviour on the chip-tool interface. Journal of Materials Processing Technology 52 (1995) 524-538
11. Lin Z.C., and Lin S.Y. A coupled finite element model of thermo-elastic-plastic large deformation for orthogonal cutting. Journal of Engineering Materials and Technology 114 (1992) 218-226
12. Strenkowski J.S., and Carroll J.T. A finite element model of orthogonal metal cutting. ASME Journal of Engineering for Industry 107 (1985) 349-354
13. Endres W.J., Devor R.E., and Kapoor S.G. A dual-mechanism approach to the prediction of machining forces, Part 2: calibration and validation. ASME Journal of Engineering for Industry 117 (1995) 534-541
14. Olovsson L., Nilsson L., and Simonsson K. An ALE formulation for the solution of two-dimensional metal cutting problems. Computers and Structures 72 (1998) 497-507
15. Hahn R.S. On the temperature development at the shear plane in the metal cutting process. Proceedings of the First US Nat. Appl. Mech. ASME (1952) 112-118
16. Chao B.T., and Trigger K.J. Cutting temperatures and metal cutting phenomena. ASME Journal of Engineering for Industry 73 (1951) 777-793
17. Lowell M.R., and Deng Z. Experimental investigation of sliding friction between hard and deformable surfaces with application to manufacturing processes. Wear 236 (1909) 117-127
18. Challen J.M., and Oxley P.L.B. An explanation of the different regimes of friction and wear using asperity deformation models. Wear 53 (1979) 229-243
19. Kayaba T., Kato K., and Hokkirigawa K. Theoretical analysis of the plastic yielding of a hard asperity sliding on a soft flat surface. Wear 87 (1983) 151-161
20. Kayaba T., Hokkirigawa K., and Kato K. Experimental analysis of the plastic yielding of a hard asperity sliding on a soft flat surface. Wear 96 (1984) 255-265
21. Challen J.M., and Oxley P.L.B. A slip-line field analysis of the transition from local asperity contact to full contact in metallic sliding friction. Wear 100 (1984) 171-193
22. Komvopoulos K., Saka N., and Suh N.P. Plowing friction in dry and lubricated metal sliding. ASME Journal of Tribology 108 (1986) 301-313
23. Komvopoulos K., Saka N., and Suh N.P. The role of hard layers in lubricated and dry sliding. ASME Journal of Tribology 109 (1987) 223-231
24. Black A.J., Kopalinsky E.M., and Oxley P.L.B. An investigation of the different regimes of deformation which can occur when a hard wedge slides over a soft surface: the influence of the wedge angle, lubrication and prior plastic working of the surface. Wear 123 (1988) 97-114
25. Black A.J., Kopalinsky E.M., and Oxley P.L.B. Sliding metallic friction with boundary lubrication: an investigation of a simplified friction theory and of the nature of boundary lubrication. Wear 137 (1990) 161-174
26. Kopalinsky E.M. Investigation of surface deformation when a hard wedge slides over a soft surface. ASME Journal of Tribology 114 (1992) 100-106
27. Black A.J., Kopalinsky E.M., and Oxley P.L.B. Asperity deformation models for explaining the mechanisms involved in metallic sliding friction and wear-a review. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 207 (1993) 335-353
28. Sutcliffe M.P.F. Surface asperity deformation in metal forming processes. International Journal of Mechanical Sciences 30 (1988) 847-868
29. Yang Y., Torrance A.A., and Oxley P.L.B. Modelling mechanical wear processes in metallic sliding friction. Journal of Physics D: Applied Physics 29 (1996) 600-608
30. Torrance A.A., and Buckey T.R. A slip-line field model of abrasive wear. Wear 196 (1996) 35-45
31. Kopalinsky E.M., and Oxley P.L.B. An investigation of the mechanics of sliding metallic wear under lubricated conditions. Wear 214 (1998) 38-46
32. Byers J.P. Laboratory evaluation of metalworking fluids. In: Byers J.P. (Ed). Metalworking Fluids (1994), Marcel Dekker, New York 191-221
33. Komanduri R., and Larsen-Basse J. Tribology: the cutting edge. Mechanical Engineering 111 (1989) 74-79
34. Shaw M.C. Metal Cutting Principles (1984), Oxford Science Publications, Oxford
35. Oxley P.L.B. Mechanics of Machining: An Analytical Approach to Assessing Machinability (1989), John Wiley & Sons, New York, US
36. Astakhov V.P. Metal Cutting Mechanics (1998), CRC Press, Boca Raton, US
37. Trent E.M., and Wright P.K. Metal Cutting (2000), Butterworth-Heinemann, Boston, US
38. Arsecularatne J.A. On tool-chip interface stress distributions, ploughing force and size effect in machining. International Journal of Machine Tools and Manufacture 37 (1997) 885-899
39. Doyle E.D., Horne J.G., and Tabor D. Frictional interactions between chip and rake face in continuous chip formation. Proceedings of Royal Society, London A 366 (1979) 173-183
40. Coker E.G., and Filon L.N.G. Treatise on Photoelasticity (1931), Cambridge University Press, Cambridge
41. Zeichev A.G. Optical Methods of Stress Analysis (1934), Frontier Publishing, Moscow
42. Frocht M.M., and Thomson R.A. Studies in Photoelasticity. Proceedings of the Third U.S. National Congress of Applied Mechanics (1958) 25-34
43. Ocushiri M., and Fukuii S. Studies of cutting action by means of photoelasticity. Journal of the Society of Precision Mechanics of Japan 1 (1934) 508-514
44. (in Russian). Andreev G.S. Photoelastic study of stresses in a cutting tool using cinematography. Vestnyk Machinostroeniya 38 (1958) 54-57
45. Kattwinkel W. Untersuchungen an schneiden spanender werkzeuge mit hilfe der spannungsoptic. Industry-Anzeiger 37 (1957) 29-33
46. Takeyama H., and Usui H. The effect of tool-chip contact area in metal cutting. ASME Journal of Engineering for Industry 79 (1958) 1089-1096
47. Chandrasekaran H., and Kapoor D.V. Photoelastic analysis of tool-chip interface stresses. ASME Journal of Engineering for Industry 87 (1965) 495-502
48. Amini E. Photoelastic analysis of stresses and forces in steady cutting. Journal of Strain Analysis 3 (1968) 206-213
49. Okushima K., Kakino Y., Hagihara S., and Hasimito H. A stress analysis in the orthogional cutting by photo elasto-plasticity method. Bulletin of Japanese Society of Precision Engineering 5 (1971) 1-7
50. Barrow G., Graham W., Kurimoto T., and Leong Y.F. Determination of rake face stress distribution in orthogonal machining. International Journal of Machine Tool Design and Research 22 (1982) 75-85
51. Bagachi A., and Wright P.K. Stress analysis in machining with the use of sapphire tools. Proceedings of Royal Society of London A 409 (1987) 99-113
52. (in Russian). Loladze T.N. Strength and Wear of Cutting Tools (1958), Mashgiz, Moscow
53. Gordon M.B. The applicability of binomial law to the process of friction in the cutting of metals. Wear 10 (1967) 274-290
54. Kato S., Yamaguchi K., and Yamada M. Stress distribution at the interface between the tool and chip in machining. ASME Journal of Engineering for Industry 93 (1972) 683-689
55. Boothroyd G., and Knight W.A. Fundamentals of Machining and Machine Tools. Second Edition (1989), Marcel Dekker, New York
56. Gorczyca F.Y. Application of Metal Cutting Theory (1987), Industrial Press, New York
57. Stenphenson D.A., and Agapiou J.S. Metal Cutting Theory and Practice (1996), Marcel Dekker, New York
58. Childs T.H.C., Maekawa K., Obikawa T., and Yamane Y. Metal Machining. Theory and Application (2000), Arnold, London
59. Schey J.A. Metal Deformation Processes: Friction and Lubrication (1970), Marcel Dekker, New York
60. Schey J.A. Tribology in Metalworking (1983), American Society for Metals, Metals Park, Ohio
61. Usui E., and Shirakashi T. Mechanics of metal cutting-from "description" to "predictive" theory. On the Art of Cutting Metals-75 Years Later, Phoenix, Arizona (1982), ASME, New York 13-36
62. Buryta D., Sowerby R., and Yellowley Y. Stress distributions on the rake face during orthogonal machining. International Journal of Machine Tools and Manufacture (1994) 721-739
63. Machado A.R., and Wallbank J. The effect of extremely low lubricant volumes in machining. Wear 210 (1997) 76-82
64. Roth R.N., and Oxley P.L.B. A slipline field analysis for orthogonal machining based on experimental flow fields. Journal of Mechanical Engineering Science 14 (1972) 86-97
65. DeGarmo E.P., Black J.T., and Kohser R.A. Materials and Processes in Manufacturing (1997), Prentice Hall, Upper Saddle River, NJ
66. Hsu T.C. A study of normal and shear stresses on a cutting tool. ASME Journal of Engineering for Industry 94 (1966) 51-64
67. Lin Z.-C., and Lo S.-P. A study of deformation of the machined workpiece and tool under different low cutting velocities with an elastic cutting tool. International Journal of Mechanical Science 40 (1998) 663-668
68. (in Russian). Silin S.S. Similarity Methods in Metal Cutting (1979), Machinostroenie, Moscow
69. (in Russian). Poletica M.F. Contact Loads on Tool Interfaces (1969), Machinostroenie, Moscow
70. (in Russian). Abuladze N.G. The tool-chip interface: determination of the contact length and properties. Machinability of Heat Resistant and Titanium Alloys (1962), Kyibashev Regional Publ. House, Kyibashev, Russia 87-96
71. Hills D.A., Nowell D., and Sackfield A. Mechanics of Elastic Contact (1993), Butterworth-Heinmann, London
72. Muskhelishvili N.I. Some Basic Problems of the Mathematical Theory of Elasticity (1977), Sijthoff & Noordhoff Int. Pub., Leyden
73. Astakhov V.P., and Outeiro J.C. Modeling of the contact stress distribution at the tool-chip interface. Machining Science and Technology 9 (2005) 85-99
74. (in Russian). Galin L.A. Contact Problems in the Theory of Elasticity (1953), Gostechnozdat, Moscow
75. Astakhov V.P., and Shvets S.V. A system concept in metal cutting. Journal of Materials Processing Technology 79 (1998) 189-199
76. (in Russian). Poletica M.F. Contact Loads on Cutting Tool Interface Surfaces (1969), Machinostroenie, Moscow
77. Astakhov V.P., and Shvets S. The assessment of plastic deformation in metal cutting. Journal of Materials Processing Technology 146 (2004) 193-202
78. Klushin M.I. Metal Cutting: Basics of Plastic Deformation of the Layer been Removed (1958), Mashgiz, Moscow, Russia
79. Liu G., and Wang Q. Thermoelastic asperity contacts, frictional shear, and parameter correlations. Journal of Tribology 122 (2000) 300-307
80. Spaans C. Treatise on the streamlines and the stress, strain, and strain rate distribution, and on stability in the primary shear zone in metal cutting. ASME Journal of Engineering for Industry 94 (1972) 690-696
81. Isakov E. Mechanical Properties of Work Materials (2000), Hanser Gardener Publications, Cincinnati, OH
82. (in Russian). Shuster L.S.H. Adhesion Processes at the Tool-Work Material Interface (1988), Machinostroenie, Moscow
83. Chen N.N.S., and Pun W.K. Stresses at the cutting tool wear land. International Journal of Machine Tools and Manufacture 28 (1988) 79-92
84. Altintas Y. Manufacturing Automation. Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design (2000), Cambridge University Press, Cambridge
85. (in Russian). Makarow A.D. Optimization of Cutting Processes (1976), Machinostroenie, Moscow
86. Komarovsky A.A., and Astakhov V.P. Physics of Strength and Fracture Control: Fundamentals of the Adaptation of Engineering Materials and Structures (2002), CRC Press, Boca Raton
87. Astakhov V.P. Tribology of metal cutting. In: Liang H., and Totten G.E. (Eds). Mechanical Tribology (2004), Marcel Dekker, New York 307-346
88. Leshock C.E., and Shin Y.C. Investigation on cutting temperature in turning by a tool-work thermocouple technique. Journal of Manufacturing Science and Engineering 119 (1997) 502-508
89. Silva M.B., and Wallbank J. Cutting temperature: prediction and measurement methods-a review. Journal of Materials Processing Technology 88 (1999) 195-202
90. (in Russian). Reznikov A.N., and Reznikov L.A. Thermal Processes in Machining Systems (1990), Machiostroenie, Moscow
91. Komanduri R., and Hou Z.B. Thermal modeling of the metal cutting process. Part I-Temperature rise distributing due to shear plane heat source. International Journal of Mechanical Science 42 (2000) 1715-1752
92. Komanduri R., and Hou Z.B. Thermal modeling of the metal cutting process-Part II: temperature rise distribution due to frictional heat source at the tool-chip interface. International Journa of Mechanical Science 43 (2001) 57-88
93. Komanduri R., and Hou Z.B. Thermal modeling of the metal cutting process-Part III: temperature rise distribution due to the combined effect of the shear plane heat source and the tool-chip interface frictional source. International Journal of Mechanical Science 43 (2001) 89-107
94. Ramesh M.V., Seetharaman K.N., Ganesan N., and Kuppuswamy G. Finite element modelling of heat transfer analysis in machining of isotropic materials. International Journal of Heat and Mass Transfer 43 (1999) 1569-1583
95. Ng E.-G., Aspinwall D.K., Brazil D., and Monaghan J. Modelling of temperature and forces when orthogonally machining hardened steel. International Journal of Machine Tools and Manufacture 39 (1999) 885-903
96. Lazoglu I., and Altintas Y. Prediction of tool and chip temperature in continuous and interrupted cutting. International Journal of Machine Tools and Manufacture 42 (2002) 1011-1022
97. (2004). http://www.thirdwavesys.com
98. Chan C.L., and Chandra A. A boundary element method analysis of the thermal aspects of metal cutting processes. ASME Journal of Engineering for Industry 113 (1991) 311-319
99. Atkins A.G., and Mai Y.W. Elastic and Plastic Fracture: Metals, Polymers. Ceramics, Composites, Biological Materials (1985), John Wiley & Sons, New York
100. Atkins A.G. Modelling metal cutting using modern ductile fracture mechanics: quantitative explantations for some longstanding problems. International Journal of Mechanical Sciences 43 (2003) 373-396
101. Atkins A.G. Modelling metal cutting using modern ductile fracture mecahnics: qualitative explanations for some longstanding problems. International Journal of Mechanical Sciences 45 (2003) 373-396
102. In: Abramowitz M., and Stegun I.A. (Eds). Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables, 9th printing (1972), Dover, New York
103. Spanier, J., Oldham, K.B., The error function erf(x) and its complement erfc(x), in An Atlas of Functions, Hemisphere, Washington, DC, 1987, pp. 385-393.
104. Smart E.F., and Trent E.M. Temperature distribution in tools used for cutting iron, titanium and nickel. International Journal of Production Research 13 (1975) 265-290
105. Wright P.K., and Trent E.M. Metallurgical methods of determining temperature gradients in cutting tools. Journal of the Iron and Steel Institute 211 (1973) 364-368
106. Mills B., Wakeman D.W., and Aboukhashaha A. A new technique for determining the temperature distribution in high speed steel cutting tools using scanning electron microscopy. Annals of the CIRP 29 (1980) 73-77
107. LoCastro S., LoValvo E., Piacentini M., Ruisi V.F., Lucchini E., Maschio S., and Lonardo P. Cutting temperatures evolution in ceramics tools: experimental tests, numerical analysis and SEM observations. Annals of the CIRP 43 (1994) 73-76
108. Kato S., Yamaguchi Y., Watanabe Y., and Hiraiwa Y. Measurement of temperature distribution within tool using powders of constant melting point. ASME Journal of Engineering for Industry 98 (1976) 607-613
109. Dearnley P.A. New technique for determining temperature distribution in cemented carbide cutting tool. Metals Technology 10 (1983) 205-210
110. Nordgren A., and Chandrasekaran H. Measurement of cutting tool temperature using binder phase transformation in cemented carbide tools (1995), Swedish Institute for Metals Research
111. Outeiro J.C., Dias A.M., and Lebrun J.L. Experimental assessment of temperature distribution in three-dimensional cutting process. Machining Science and Technology 8 (2004) 357-376
112. Boothroyd G. Temperatures in orthogonal metal cutting. Proceedings of the Institution of Mechanical Engineers 177 (1963) 789-802
113. Malitzki H., Radtke U., and Barnikow A.-M. Messung von temperaturfeldern im spanwurzelgebiet beim drehen. Feingeratetechnik 28 (1979) 68-71
114. Spur G., and Beyer H. Erfassung der temperaturverteilung am drehmeissel mit hilfe der fernsehthermographie. Annals of the CIRP 22 (1973) 3-4
115. Le Calvez C. Etude des Aspects Thermiques et Métallurgiques de la Coupe Orthogonale d'un Acier au Carbone. Thèse de Doctorat (1995), Ecole Nationale Superieure d'Arts et Mètiers, Paris
116. Barrow G. A review of experimental and theoretical techniques for assessing cutting temperatures. Annals of the CIRP 19 (1973) 551-557
117. Kottenstette J.P. Measuring tool-chip interface temperatures. ASME Journal of Engineering for Industry 108 (1986) 101-104
118. Ueda T., Sato M., and Nakayama R. The temperature of a single crystal diamond tool in turning. Annals of the CIRP 47 (1998) 41-44
119. Ueda T., Hosokawa A., and Yamamoto A. Studies on temperature of abrasive grains in grinding-application of infrared radiation pyrometer. ASME Journal of Engineering for Industry 107 (1985) 127-133
120. Herchang A., and Yang W.J. Heat transfer and tool life of metal cutting tools in turning. International Journal of Heat and Mass Transfer 41 (1998) 613-623
121. Vernaza-Pena K.M., Mason J.J., and Li M. Experimental study of the temperature field generated orthogonal machining of an aluminum alloy. Experimental Mechanics 42 (2002) 221-229
122. Zehnder A.T. Plasticity induced heating in the fracture and cutting of metals. In: Aliabadi M.H. (Ed). Thermo Mechanical Fatigue and Fracture (2002), WIT Press, Southampton 209-244
123. Kwon P., Schiemann T., and Kountanya R. An inverse estimation scheme to measure steady-state tool-chip interface temperature using an infrared camera. International Journal of Machine Tools and Manufacture 41 (2001) 1015-1030
124. Young H.T., and Chou T.L. Investigation of edge effect from the chip-back temperature using IR thermographic techniques. Journal of Material Processing Technology 52 (1995) 213-224
125. Chu T.H., and Wallbank J. Determination of the temperature of a machined surface. ASME Journal of Manufacturing Science and Engineering 120 (1998) 259-263
126. Outeiro J.C. Comportamento do Aço AISI 316L em Torneamento Ortogonal (1996), Departmento Engenharia Mecânia, Universidade de Coimbra, Coimbra
127. M'Saoubi R., Le Calvez C., Changeux B., and Lebrun J.L. Thermal and microstructural analysis of orthogonal cutting of low alloyed carbon steel using an infrared-charge-coupled device camera technique. Proceedings of the Institution of Mechanical Engineers, Part B. Journal of Engineering Manufacture 216 (2002) 153-165
128. Pajani D. La Mesure Thermographique des Hautes Temperatures. Le Choix de la Bande Spectrale en Fonction des ... l'Etendue d'Echelle, la Sensibilite et l'Exactitude (1996). http://www.perso.wanadoo.fr/dpajani/ineth/i_mesureht.html Paris, França
129. Pollock D.D. Thermocouples: Theory and Properties (1991), CRC Press, Boca Raton
130. Kinzie P.A. Thermocouple Temperature Measurement (1973), John Wiley & Sons, New York
131. Kirlin T.W. Practical Thermocouple Thermometry (1999), Instrument Society of America, Research Triangle Park, NC
132. Ivester R.W. Comparison of machining simulations for 1045 steel to experimental measurements. SME Paper TPO4PUB336 (2004) 1-15
133. Stephenson D.A. Tool-work thermocouple temperature measurements-theory and implementation issues. ASME Joural of Engineering for Industry 115 (1993) 432-437
134. Wan Y., Tang Z.T., Liu Z.Q., and Ai X. The assessment of cutting temperature measurements in high-speed machining. Materials Science Forums 471-472 (2004) 162-166
135. (in Russian). Bobrovsky V.A. Electrodifussion Wear of Cutting Tools (1970), Machinostroenie, Moscow
136. (in Russian). Bobrovsky V.A., Drachev O.I., and Rubjakov A.V. Cutting Non-Ferrous Materials (2001), Polytechnica, St. Petersburg