MoSi2 laminate processed by tape casting: Microstructure and mechanical properties' investigation

Intermetallics

Volumn 16, Issue 6, 2008, Pages 758-768

  Biamino, S ^a   Antonini, A ^a   Pavese, M ^a   Fino, P ^a   Badini, C ^a  

^a POLITECNICO DI TORINO   (Italy)

Author keywords

A. Molybdenum silicides; C. Sintering; F. Mechanical testing; G. Aero engine components

Indexed keywords

MECHANICAL TESTING; MOLYBDENUM COMPOUNDS; SINTERING; THERMAL EFFECTS;

AERO-ENGINE COMPONENTS; MOLYBDENUM SILICIDES;

LAMINATES;

EID: 44149099771     PISSN: 09669795     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.intermet.2008.02.007     Document Type: Article

References (58)

1. Petrovic J.J., and Vasudevan A.K. Key developments in high temperature structural silicides. Mater Sci Eng A261 (1999) 1-5
2. 3. Mater Sci Eng A261 (1999) 252-260
3. 2-based high temperature structural silicides. Intermetallics 8 (2000) 1175-1182
4. Koch C.C. Intermetallic matrix composites prepared by mechanical alloying - a review. Mater Sci Eng A244 (1998) 39-48
5. Mitra R., Svristava A.K., Prasad N.E., and Kumari S. Microstructure and mechanical behaviour of reaction hot pressed multiphase Mo-Si-B and Mo-Si-B-Al intermetallic alloys. Intermetallics 14 (2006) 1461-1471
6. Zelenitsas K., and Tsakiropoulos P. Study of the role of Ta and Cr additions in the microstructure of Nb-Ti-Si-Al in situ composites. Intermetallics 14 (2006) 639-659
7. Vellios N., and Tsakiropoulos P. The role of Sn and Ti in the microstructure of Nb-18Si base alloys. Intermetallics 15 (2007) 1518-1528
8. 2. J Alloys Compd 430 (2007) 170-174
9. 3 nanocomposite by mechanical alloying. Mater Sci Eng A430 (2006) 185-188
10. 2 particles. Compos Sci Technol 61 (2001) 963-969
11. 2 under water lubrication. Mater Lett 59 (2005) 583-587
12. 2 composites. Mater Lett 57 (2003) 1239-1243
13. 2. Mater Sci Eng A396 (2005) 277-284
14. Paswan S., Mitra R., and Roy S.K. Oxidation behaviour of the Mo-Si-B and Mo-Si-B-Al alloys in the temperature range of 700-1300 °C. Intermetallics 15 (2007) 1217-1227
15. Geng J., and Tsakiropoulos P. A study of the microstructure and oxidation of Nb-Si-Cr-Al-Mo in situ composites alloyed with Ti, Hf, and Sn. Intermetallics 15 (2007) 382-395
16. 2 at 773 K. Intermetallics 14 (2006) 406-411
17. 3 particles. Mater Sci Eng A345 (2003) 118-121
18. 2-TiC composites. Ceram Int 28 (2002) 387-392
19. 2-based materials. Mater Sci Eng A195 (1995) 75-88
20. Stoloff N.S. An overview of powder processing of silicides and their composites. Mater Sci Eng A261 (1999) 169-180
21. 2 composites. Mater Sci Eng A192/193 (1995) 31-37
22. 2 materials by nanostructure design. Mater Sci Eng A261 (1999) 6-15
23. 3 molybdenum silicides. Mater Sci Eng A340 (2003) 204-211
24. 2 composites. J Eur Ceram Soc 22 (2002) 791-796
25. 2 alloyed with aluminium. Int J Refract Met Hard Mater 21 (2003) 75-79
26. Maloy S.A., Lewandowski J.J., Heuer A.H., and Petrovich J.J. Effects of carbon additions on the high temperature mechanical properties of molybdenum disilicide. Mater Sci Eng A155 (1992) 159-163
27. Chawla K.K., Petrovic J.J., Alba Jr. J., and Hexemer R. Phase identification in reactively sintered molybdenum disilicide composites. Mater Sci Eng A261 (1999) 181-187
28. Shubert T., Bohm A., Kieback B., Achtermann M., and Scholl R. Effects of high energy milling on densification behaviour of Mo-Si powder mixtures during pressureless sintering. Intermetallics 10 (2002) 873-878
29. 2 in situ composites. Mater Sci Eng A382 (2004) 321-327
30. 2. Mater Sci Eng A345 (2003) 270-277
31. 2-SiC composite prepared by reactive sintering of powders. Mater Sci Eng A251 (1998) 262-268
32. Clegg W.J. The fabrication and failure of laminar ceramic composites. Acta Metall Mater 40 (1992) 3085-3093
33. Reynaud C., Thevenot F., Chartier T., and Besson J.L. Mechanical properties and mechanical behaviour of SiC dense-porous laminates. J Eur Ceram Soc 25 (2005) 589-597
34. Leguillon D., Tariolle S., Martin E., Charter T., and Besson J.L. Prediction of crack deflection in porous/dense ceramic laminates. J Eur Ceram Soc 26 (2006) 343-349
35. Folson C.A., Zock F.W., and Lange F.F. Flexural properties of brittle multilayer materials. I, Modelling. J Am Ceram Soc 77 (1994) 689-696
36. 3/SiC ceramic with improved mechanical behaviour. J Eur Ceram Soc 20 (2000) 1771-1775
37. Lakshminarayanan R., Shetty D.K., and Cutler R.A. Toughening of layered ceramic composites with residual surface compression. J Am Ceram Soc 79 (1996) 79-87
38. Green D.J., Cai P.Z., and Messing L. Residual stresses in alumina-zirconia laminates. J Eur Ceram Soc 19 (1999) 2511-2517
39. Prakash O., Sarkar P., and Nicholson P.S. Crack deflection in ceramic/ceramic laminates with strong interfaces. J Am Ceram Soc 78 (1995) 1125-1127
40. Jimenez-Melendo M., Clauss C., and Dominiguez-Rodriguez A. Microstructure and high temperature mechanical behaviour of alumina-alumina-yttria-stabilized tetragonal zirconia multilayer composites. J Am Ceram Soc 80 (1997) 2126-2130
41. 2 laminated composites. J Am Ceram Soc 69 (1986) C191-C192
42. Tok A.I.Y., Boey F.T.C., and Khor K.A. Tape casting of high dielectric ceramic composite substrates for microelectronic application. J Mater Process Technol 89/90 (1999) 508-512
43. 3 slurries. J Eur Ceram Soc 20 (2000) 1691-1697
44. 3 ratio on intergranular phases and films in tape-casting α-SiC with high toughness. Acta Mater 53 (2005) 2521-2529
45. Zhang J.X., Jiang D.L., Qin Sh.Y., and Huang Zh.R. Fracture behaviour of laminated SiC composites. Ceram Int 30 (2004) 697-709
46. Zhang J., Huang R., Gu H., Jiang D., Lin Q., and Huang Z. High toughness in laminated SiC ceramics from aqueous tape casting. Scr Mater 52 (2005) 381-385
47. Badini C., Fino P., Ortona A., and Amelio C. High temperature oxidation of multilayered SiC processed by tape casting and sintering. J Eur Ceram Soc 22 (2002) 2071-2079
48. Pavese M., Fino P., Ortona A., and Badini C. Potential of SiC multilayer for high temperature applications in oxidising environment. Ceram Int 34 (2008) 197-203
49. Liu H., and Hsu S.M. Fracture behaviour of multilayer silicon nitride/boron nitride ceramics. J Am Ceram Soc 79 (1996) 2452-2457
50. Shigegaki Y., Brito M.E., Hirao K., Toriyama M., and Kanzaki S. Processing of a novel multilayered silicon nitride. J Am Ceram Soc 79 (1996) 2197-2200
51. 2 composites by tape casting. J Am Ceram Soc 78 11 (1995) 3129-3132
52. 2-based sandwich composite made by tape casting. J Am Ceram Soc 78 11 (1995) 2967-2972
53. 3 FGM: elaboration by tape casting and SHS. J Eur Ceram Soc 11 (2001) 2353-2360
54. Sciti D., Nagliati M., Tochino S., Pezzotti G., and Guicciardi S. Fabrication and residual stresses characterization of novel non-oxide multilayer ceramics. J Eur Ceram Soc 26 (2006) 3415-3423
55. 2 composites. J Eur Ceram Soc 24 (2004) 2303-2311
56. 2 system. Mater Chem Phys 67 (2001) 256-262
57. 5) multilayer composites prepared by tape casting. J Eur Ceram Soc 19 (1999) 2111-2116
58. Lewis J.A. Binder removal from ceramics. Annu Rev Mater Sci 27 (1997) 147-173