Copper-tungsten composites sprayed by HVOF

Journal of Thermal Spray Technology

Volumn 17, Issue 2, 2008, Pages 177-180

  Matějíček, Jiří ^a   Zahálka, František ^b   Bensch, Jan ^a   Chi, Weiguang ^c   Sedláček, Josef ^d  

^a INSTITUTE OF PLASMA PHYSICS   (Czech Republic)

^b Skoda Research Ltd   (Czech Republic)

^c STONY BROOK UNIVERSITY   (United States)

^d CZECH TECHNICAL UNIVERSITY IN PRAGUE   (Czech Republic)

Author keywords

Composite materials; High velocity electric arc sprayed coatings; HVOF spray parameters

Indexed keywords

COMPOSITE COATINGS; COPPER; ELECTRIC PROPERTIES; MECHANICAL PROPERTIES; THERMODYNAMIC PROPERTIES; TUNGSTEN;

DENSE COATINGS; HIGH-VELOCITY OXY-FUEL SPRAYING;

SPRAYED COATINGS;

EID: 44149097385     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9165-5     Document Type: Article

References (19)

1. 1. H.K. Kang S.B. Kang 2003 Tungsten/Copper Composite Deposits Produced by a Cold Spray Scripta Mater. 49 12 1169 1174 10.1016/j.scriptamat.2003.08.023 1:CAS:528:DC%2BD3sXnsF2ltLg%3D H.K. Kang, S.B. Kang, Tungsten/Copper Composite Deposits Produced by a Cold Spray, Scripta Mater., Vol 49, (No. 12), 2003, p 1169–1174
2. 2. G. Pintsuk I. Smid J.-E. Doring W. Hohenauer J. Linke 2007 Fabrication and Characterization of Vacuum Plasma Sprayed W/Cu-Composites for Extreme Thermal Conditions J. Mater. Sci. 42 1 30 39 10.1007/s10853-006-1039-y 1:CAS:528:DC%2BD2sXnsF2gsA%3D%3D G. Pintsuk, I. Smid, J.-E. Doring, W. Hohenauer, J. Linke, Fabrication and Characterization of Vacuum Plasma Sprayed W/Cu-Composites for Extreme Thermal Conditions, J. Mater. Sci., Vol 42, (No. 1), 2007, p 30–39
3. 3. J. Matějíček P. Chráska J. Linke 2007 Thermal Spray Coatings for Fusion Applications—Review J. Therm. Spray Technol. 16 1 64 83 10.1007/s11666-006-9007-2 J. Matějíček, P. Chráska, J. Linke, Thermal Spray Coatings for Fusion Applications—Review, J. Thermal Spray Technol., Vol 16, (No. 1), 2007, p 64–83
4. 4. J. Chapa I. Reimanis 2002 Modeling of Thermal Stresses in a Graded Cu/W Joint J. Nucl. Mater. 303 2-3 131 136 10.1016/S0022-3115(02)00820-6 1:CAS:528:DC%2BD38Xktlaksbc%3D J. Chapa, I. Reimanis, Modeling of thermal stresses in a graded Cu/W joint, J. Nucl. Mater., Vol 303, (No. 2–3), 2002, p 131–136
5. 5. Y. Itoh M. Takahashi H. Takano 1996 Design of Tungsten/Copper Graded Composite for High Heat Flux Components Fus. Eng. Des. 31 4 279 289 10.1016/0920-3796(95)00432-7 1:CAS:528:DyaK28XmtV2itr4%3D Y. Itoh, M. Takahashi, H. Takano, Design of Tungsten/Copper Graded Composite for High Heat Flux Components, Fus. Eng. and Des., Vol 31, (No. 4), 1996, p 279–289
6. 6. J. Matějíček, K. Neufuss, D. Kolman, O. Chumak, and V. Brožek, Development and Properties of Tungsten-Based Coatings Sprayed by WSP(R), Thermal Spray Connects: Explore Its Surfacing Potential!, E. Lugscheider, Ed., May 2-4, 2005 (Basel, Switzerland), DVS, Düsseldorf, 2005, p 634-640
7. 7. G. Pintsuk S.E. Brünings J.-E. Döring J. Linke I. Smid L. Xue 2003 Development of W/Cu—functionally graded materials Fus. Eng. Des. 66-68 237 240 10.1016/S0920-3796(03)00220-5 1:CAS:528:DC%2BD3sXnt1Smsrk%3D G. Pintsuk, S.E. Brünings, J.-E. Döring, J. Link, I. Smid, L. Xue, Development of W/Cu—functionally graded materials, Fus. Eng. and Des., Vol 66–68, 2003, p 237–240
8. 8. C.C. Ge J.T. Li Z.J. Zhou W.B. Cao W.P. Shen M.X. Wang N.M. Zhang X. Liu Z.Y. Xu 2000 Development of Functionally Graded Plasma-Facing Materials J. Nucl. Mater. 283 1116 1120 10.1016/S0022-3115(00)00318-4 C.C. Ge, J.T. Li, Z.J. Zhou, W.B. Cao, W.P. Shen, M.X. Wang, N.M. Zhang, X. Liu, Z.Y. Xu, Development of Functionally Graded Plasma-Facing Materials, J. Nucl. Mater., Vol 283, 2000, p 1116–1120
9. 9. H.K. Kang 2004 Tungsten/Copper Composite Plates Prepared by a Modified Powder-in-Tube Method Scripta Mater. 51 6 473 477 10.1016/j.scriptamat.2004.06.004 1:CAS:528:DC%2BD2cXltlyiurw%3D H.K. Kang, Tungsten/Copper Composite Plates Prepared by a Modified Powder-in-Tube Method, Scripta Mater., Vol 51, (No. 6), 2004, p 473–477
10. 10. R. Enžl, HVOF Spraying of WC-based Coatings (in Czech, Vysokorychlostní nástřik povlaků na bázi karbidu wolframu), dissertation, ZČU Plzeň, 2001
11. 11. V. Harok K. Neufuss 2001 Elastic and Inelastic Effects in Compression in Plasma-Sprayed Ceramic Coatings J. Therm. Spray Technol. 10 1 126 132 10.1361/105996301770349592 1:CAS:528:DC%2BD3MXjsleqt74%3D V. Harok, K. Neufuss, Elastic and Inelastic Effects in Compression in Plasma-Sprayed Ceramic Coatings, J. Thermal Spray Technol., Vol 10, (No. 1), 2001, p 126–132
12. 12. W. Chi S. Sampath H. Wang 2007 Comparison of the Thermal Transport Property Measurements of Thermally Sprayed Coatings by the Laser and Xenon Flash Techniques J. Therm. Spray Technol. 16 3 444 448 10.1007/s11666-007-9049-0 1:CAS:528:DC%2BD2sXhtFemsr7O W. Chi, S. Sampath, H. Wang, Comparison of the Thermal Transport Property Measurements of Thermally Sprayed Coatings by the Laser and Xenon Flash Techniques, J. Thermal Spray Technol.,Vol 16 (No. 3), 2007, p 444–448
13. 13. Matweb, http://www.matweb.com
14. 14. R.E. Taylor 1998 Thermal Expansion of Solids ASM International Materials Park R.E. Taylor, Thermal Expansion of Solids, ASM International, Materials Park, 1998
15. 15. I. Iordanova K.S. Forcey B. Gergov V. Bojinov 1995 Characterization of Flame-Sprayed and Plasma-Sprayed Pure Metallic and Alloyed Coatings Surf. Coat. Technol. 72 1-2 23 29 10.1016/0257-8972(94)02332-K 1:CAS:528:DyaK2MXkvFKlu7o%3D I. Iordanova, K.S. Forcey, B. Gergov, V. Bojinov, Characterization of Flame-Sprayed and Plasma-Sprayed Pure Metallic and Alloyed Coatings, Surf. Coat. Tech., Vol 72, (No. 1–2), 1995, p 23–29
16. 16. P. Sudharshan Phani D. Srinivasa Rao S.V. Joshi G. Sundararajan 2007 Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper Coatings J. Therm. Spray Technol. 16 3 425 434 10.1007/s11666-007-9048-1 P. Sudharshan Phani, D. Srinivasa Rao, S.V. Joshi, G. Sundararajan, Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper Coatings, J. Thermal Spray Technol., Vol 16 (No. 3), 2007, p 425–434
17. 17. F. Gärtner T. Stoltenhoff T. Schmidt H. Kreye 2006 The Cold Spray Process and Its Potential for Industrial Applications J. Therm. Spray Technol. 15 2 223 232 10.1361/105996306X108110 F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye, The Cold Spray Process and Its Potential for Industrial Applications, J. Thermal Spray Technol., Vol 15, (No. 2), 2006, p 223–232
18. 18. J.-E. Döring R. Vassen G. Pintsuk D. Stöver 2003 The Processing of Vacuum Plasma-Sprayed Tungsten–Copper Composite Coatings for High Heat Flux Components Fus. Eng. Des. 66-68 259 263 10.1016/S0920-3796(03)00302-8 J.-E. Döring, R. Vassen, G. Pintsuk, D. Stöver, The processing of vacuum plasma-sprayed tungsten–copper composite coatings for high heat flux components, Fus. Eng. and Des., Vol 66–68, 2003, p 259–263
19. 19. H.K. Kang S.B. Kang 2004 Effect of Feedstock Injection Methods on Oxidation Behavior and Microstructure of Plasma Sprayed W/Cu Composites Surf. Coat. Technol. 182 1 124 130 10.1016/j.surfcoat.2003.08.055 1:CAS:528:DC%2BD2cXisVSrtbo%3D H.K. Kang, S.B. Kang, Effect of Feedstock Injection Methods on Oxidation Behavior and Microstructure of Plasma Sprayed W/Cu Composites, Surf. Coat. Tech., Vol 182, (No. 1), 2004, p 124–130