Basic mechanical behaviors and mechanics of shear banding in BMGs

International Journal of Impact Engineering

Volumn 35, Issue 8, 2008, Pages 704-716

  Dai, L H ^a   Bai, Y L ^a  

^a INSTITUTE OF MECHANICS   (China)

Author keywords

Fracture; Free volume; Metallic glass; Plastic deformation; Shear band

Indexed keywords

FRACTURE; MECHANICAL PROPERTIES; PLASTIC DEFORMATION; SHEAR BANDS;

BULK METALLIC GLASSES (BMG); FREE VOLUME CREATION; THERMAL SOFTENING;

METALLIC GLASS;

EID: 43449112938     PISSN: 0734743X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijimpeng.2007.10.007     Document Type: Article

References (84)

1. Turnbull D., and Cech R.E. Microscopic observation of the solidification of small metal droplets. J Appl Phys 21 (1950) 804-810
2. Klement W.J., Willens R.H., and Duwez P. Non-crystalline structure in solidified gold-silicon alloys. Nature 187 (1960) 869
3. Chen H.S., and Turnbull D. Formation, stability, and structure of palladium-silicon based alloy glass. Acta Metall 17 (1969) 1021-1031
4. Chen H.S. Thermodynamic consideration on the formation and stability of metallic glasses. Acta Metall 22 (1974) 1505-1511
5. Kui H.W., Greer A.L., and Turnbull D. Formation of bulk metallic glass by fluxing. Appl Phys Lett 45 (1984) 615-616
6. Inoue A., Kato A., Zhang T., Kim S.G., and Masumoto T. Mg-Cu-Y amorphous alloys with high strengths produced by a metallic mold casting method. Mater Trans JIM 32 (1991) 609-616
7. 22.5. Appl Phys Lett 63 (1993) 2342-2344
8. Greer A.L. Metallic glasses. Science 267 (1995) 1947-1953
9. Johnson W.L. Bulk glass-forming metallic alloys: science and technology. Mater Res Bull 24 (1999) 42-56
10. Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater 48 (2000) 279-306
11. Wang W.H., Dong C., and Shek C.H. Bulk metallic glasses. Mater Sci Eng R 44 (2004) 45-89
12. Ashby M.F., and Greer A.L. Bulk metallic glasses as structural materials. Scr Mater 54 (2006) 321-326
13. Eckert J., Das J., Pauly S., and Duhamel C. Mechanical properties of bulk metallic glasses and composites. J Mater Res 22 (2007) 285-301
14. 4 System. Acta Mater 52 (2004) 4093-4099
15. Lewandowski J.J., Wang W.H., and Greer A.L. Intrinsic plasticity or brittleness of metallic glasses. Philos Mag Lett 85 (2005) 77-87
16. Fu X.Y., Rigney D.A., and Falk M.L. Sliding and deformation of metallic glass: experiments and MD simulations. J Non-Crys Solids 317 (2003) 206-214I
17. Spaepen F. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall 25 (1977) 407-415
18. Pampillo C.A. Flow and fracture in amorphous alloys. J Mater Sci 10 (1975) 1194-1227
19. 10 bulk metallic glass. Scr Mater 43 (2000) 1071-1075
20. Yang B., Morrison M.L., Liaw P.K., Buchanan R.A., Wang G., Liu C.T., et al. Dynamic evolution of nanoscale shear bands in a bulk metallic glass. Appl Phys Lett 86 (2005) 14904-14913
21. 3 bulk metallic glass. Acta Mater 51 (2003) 1167-1179
22. 20 bulk metallic glass in tension. Scr Mater 46 (2002) 43-47
23. Wang G., Shen J., Sun J.F., Lu Z.P., Stachurski Z.H., and Zhou B.D. Tensile fracture characteristic and deformation behavior of a Zr-based bulk metallic glass at high temperatures. Intermetallics 13 (2005) 642-648
24. Liu L.F., Dai L.H., Bai Y.L., and Wei B.C. Initiation and propagation of shear bands in Zr-based bulk metallic glass under quasi-static and dynamic shear loadings. J Non-Crystall Solids 351 (2005) 3259-3270
25. Liu L.F., Dai L.H., Bai Y.L., Wei B.C., and Eckert J. Characterization of rate-dependent shear behavior of Zr-based bulk metallic glass using shear punch testing. J Mater Res 21 (2006) 153-160
26. Liu L.F., Dai L.H., Bai Y.L., Wei B.C., and Eckert J. Behavior of multiple shear bands in Zr-based bulk metallic glass. Mater Chem Phys 93 (2005) 174-177
27. 22.5 bulk metallic glass over a wide range of strain-rates and temperatures. Acta Mater 51 (2003) 3429-3443
28. Xi X.K., Zhao D.Q., Pan M.X., Wang W.H., Wu Y., and Lewandowski J.J. Fracture of brittle metallic glasses: brittleness or plasticity. Phys Rev Lett 94 (2005) 1255101-1255104
29. Xi X.K., Zhao D.Q., Pan M.X., Wang W.H., Wu Y., and Lewandowski J.J. Periodic corrugation on dynamic fracture surface in brittle bulk metallic glass. Appl Phys Lett 89 (2006) 1819111-1819113
30. Wang G., Wang Y.T., Liu Y.H., Pan M.X., Zhao D.Q., and Wang W.H. Evolution of nanoscale morphology on fracture surface of brittle metallic glass. Appl Phys Lett 89 (2006) 1219091-1219093
31. Shen J., Liang W.Z., and Sun J.F. Formation of nanowaves in compressive fracture of a less-brittle bulk metallic glass. Appl Phys Lett 89 (2006) 121908
32. Zhang Z.F., Wu F.F., Gao W., Tan J., Wang Z.G., Stoica M., et al. Wavy cleavage fracture of bulk metallic glass. Appl Phys Lett 89 (2006) 2519171-2519173
33. Pan D.G., Zhang H.F., Wang A.M., Wang Z.G., and Hu Z.Q. Fracture instability in Mg-based bulk metallic glasses. J Alloys Compd 438 (2007) 145-149
34. Kimura H., and Masumoto T. A model of the mechanics of serrated flow in an amorphous alloy. Acta Metall 31 (1983) 231-240
35. 24 bulk metallic glass. Mater Trans JIM 42 (2001) 642-649
36. Schuh C.A., and Neih T.G. A nanoindentation study of serrated flow in bulk metallic glasses. Acta Mater 51 (2003) 87-99
37. Jiang W.H., and Atzmon M. Rate dependence of serrated flow in a metallic glass. J Mater Res 19 (2003) 755-757
38. Greer A.L., Castellero, Madge S.V., Walker I.T., and Wilde J.R. Nanoindentation studies of shear banding in fully amorphous and partly devitrified metallic alloys. Mater Sci Eng A375-A377 (2004) 1182-1185
39. Liu L.F., Dai L.H., Bai Y.L., and Wei B.C. Strain rate-dependent compressive deformation behavior of Nd-based bulk metallic glass. Intermetallics 13 (2005) 827-832
40. Dai L.H., Liu L.F., Yan M., Wei B.C., and Eckert J. Serrated plastic flow in a Zr-based bulk metallic glass during nanoindentation. Chin Phys Lett 21 (2004) 1593-1595
41. Wei B.C., Zhang L.C., Zhang T.H., Xing D.M., Das J., and Eckert J. Strain rate dependence of plastic flow in Ce-based bulk metallic glass during nanoindentation. J Mater Res 22 (2007) 1-5
42. Yang B., and Nieh T.G. Effect of the nanoindentation rate on the shear band formation in an Au-based bulk metallic glass. Acta Mater 55 (2007) 295-3000
43. Bai Y.L., and Dodd B. Adiabatic shear localization (1992), Pergamon Press, Oxford
44. Meyers M.A. Dynamic behavior of materials (1994), Wiley, New York
45. Wright T.W. The physics and mathematics of adiabatic shear bands (2002), Cambridge University Press, Cambridge
46. Batra R.C., and Wei Z.G. Shear band spacing in thermoviscoplastic materials. Int J Impact Eng 32 (2006) 947-967
47. Argon A.S. Plastic deformation in metallic glasses. Acta Metall 27 (1979) 47-58
48. Steif P.S., Spaepen F., and Huchinson J.W. Strain localization in amorphous metals. Acta Metall 30 (1982) 447-455
49. Wright W., Hufangel T.C., and Nix W.D. Free volume coalescence and void formation in shear bands in metallic glass. J Appl Phys 93 (2003) 1432-1437
50. Huang R., Suo Z., Prevost J.H., and Nix W.D. Inhomogeneous deformation in metallic glasses. J Mech Phys Solids 50 (2002) 1011-1027
51. Leamy H.J., Chen H.S., and Wang T.T. Plastic flow and fracture of metallic glass. Metall Trans 3 (1972) 699-708
52. Liu C.T., Heatherly L., Easton D.S., Carmichael C.A., Schneibel J.H., and Chen C.H. Test environments and mechanical properties of Zr-based bulk amorphous alloys. Metall Mater Trans A29 (1998) 1811-1820
53. Dai L.H., Yan M., Liu L.F., and Bai Y.L. Adiabatic shear banding instability in bulk metallic glasses. Appl Phys Lett 87 (2005) 141916
54. Anand L., and Su C. A theory for amorphous viscoplastic materials undergoing finite deformation, with application to metallic glasses. J Mech Phys Solids 53 (2005) 1362-1396
55. Yang Q., Mota A., and Ortiz M. A finite deformation constitutive model of bulk metallic glass plasticity. Comput Mech 37 (2006) 194-204
56. Bruck H.A., Rosakis A.J., and Johnson W.L. The dynamic compressive behavior of beryllium bearing bulk metallic glass. J Mater Res 11 (1996) 503-511
57. 10. J Mater Res (2002) 1441-1445
58. Maddin R., and Masumoto T. The deformation of amorphous palladium-20% at silicon. Mater Sci Eng 9 (1972) 153-162
59. Conner R.D., Dandliker R.B., Scruggs V., and Johnson W.L. Dynamic deformation behavior of tungsten-fiber/metallic-glass matrix composites. Int J Impact Eng 24 (2000) 435-444
60. Martin M., Thadhani N.N., Kockes L., and Dowding R. Instrumented anvil-rod-impact testing of a bulk metallic glass composite for constitutive model validation. Scr Mater 55 (2006) 1019-1022
61. Zhuang S., Lu J., and Ravichandran G. Shock wave response of a zirconium-based bulk metallic glass and its composite. Appl Phys Lett 80 (2002) 4522-4524
62. Tumeaure S.J., Winey J.M., and Gupta Y.M. Appl Phys Lett 84 (2004) 1692-1694
63. Fineberg J., Gross S.P., Marder M., and Swiney H. Instability in dynamic fracture. Phys Rev Lett 67 (1991) 457-460
64. Spaepen F., and Turnbull D. A mechanism for the flow and fracture of metallic glasses. Scr Metall 8 (1974) 563-568
65. Wang G., Pan H., Ke F., Xia M.F., and Bai Y.L. Strain rate effect on the mechanical properties of amorphous copper. Chin Phys B 17 1 (2008) 259-263
66. Wang G., Pan H., Ke F., Xia M.F., and Bai Y.L. A microscopic study of formation and mechanical properties of amorphous Cu. J Beijing Univ Aeronaut Astronaut 33 6 (2007) 752-756
67. Wang G, Xu XH, Han YN, Han BS, Ke FJ, Wang WH. Ductile to brittle transition in dynamic fracture of a brittle bulk metallic glass. Phys Rev Lett, submitted for publication.
68. Jiang M.Q., Ling Z., Meng J.X., and Dai L.H. Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage. Phil Mag 88 3 (2008) 407-426
69. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation measurements. J Mater Res 7 (1992) 1564-1583
70. Cheng Y.T., and Cheng C.M. Scaling, dimensional analysis, and indentation measurements. Mater Sci Eng R 44 (2004) 91-149
71. Ai K., and Dai L.H. A new modified expanding cavity model for characterizing the spherical indentation behavior of bulk metallic glass with pile-up. Scr Mater 56 (2007) 761-764
72. Robinson J.M. Serrated flow in aluminum base alloy. Int Mater Rev 39 (1994) 217-227
73. Li W.H., Wei B.C., Zhang T.H., Xing D.M., Zhang L.C., and Wang Y.R. Study of serrated flow and plastic deformation in metallic glasses through instrumental indentation. Intermetallics 15 (2007) 706-710
74. 10.
75. 2/3 temperature dependence. Phys Rev Lett 95 (2005) 1955011-1955014
76. Yang B., Liu C.T., and Nieh T.G. Unified equation for the strength of bulk metallic glasses. Appl Phys Lett 88 (2006) 2219111-2219114
77. 7.
78. Noviko V.N., and Sokolov A.P. Poisson's ratio and the fragility of glass-forming liquids. Nature 431 (2004) 961-963
79. Dai L.H., and Jiang M.Q. The fragility of liquid and its correlation with mechanical properties of glasses. Adv Mech 37 (2007) 346-360
80. Donovan P.E., and Stobbs W.M. The structure of shear bands in metallic glasses. Acta Metall 29 (1981) 1419-1436
81. Li J., Spaepan F., and Hufnagel T.C. Nanometer scale defects in shear bands in a metallic glass. Philos Mag A82 (2002) 2623-2630
82. Bai Y.L. Thermo-plastic instability in simple shear. J Mech Phys Solids 30 (1982) 195-207
83. Korn G.A., and Korn T.M. Mathermatical handbook for scientists and engineers (1961), McGraw-Hill, New York
84. Zhang Y., and Greer A.L. Thickness of shear bands in metallic glasses. Appl Phys Lett 89 (2006) 071907