Physico-mechanical analysis of free ethyl cellulose films comprised with novel plasticizers of vitamin resources

International Journal of Pharmaceutics

Volumn 356, Issue 1-2, 2008, Pages 153-166

  Kangarlou, Sogol ^a   Haririan, Ismaeil ^a   Gholipour, Yaghob ^b  

^a TEHRAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

Author keywords

Ethyl cellulose; Free film; Membrane theory; Plasticizer; Vitamin D3; Vitamin E

Indexed keywords

ALPHA TOCOPHEROL; COLECALCIFEROL; ETHYL CELLULOSE; PLASTICIZER; SEBACIC ACID DIBUTYL ESTER; VITAMIN;

ARTICLE; DRUG FORMULATION; DRUG STRUCTURE; MATHEMATICAL ANALYSIS; PRIORITY JOURNAL;

ALPHA-TOCOPHEROL; CELLULOSE; CHEMISTRY, PHARMACEUTICAL; CHOLECALCIFEROL; DICARBOXYLIC ACIDS; PLASTICIZERS; TENSILE STRENGTH; VITAMINS;

EID: 42649140549     PISSN: 03785173     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijpharm.2008.01.032     Document Type: Article

References (49)

1. Allwood M.C. Compatibility and stability of TPN mixtures in Big Bags. J. Clin. Hosp. Pharm. 9 (1984) 181-198
2. Berg J.M., Tymoczko J.L., and Stryer L. Biochemistry. 6th ed. (2007), W.H. Freeman and Company, New York pp. 754, 755
3. Bodmeier R., and Paeratakul O. Process and formulation variables affecting the drug release from chlorpheniramine maleate-loaded beads coated with commercial and self-prepared aqueous ethyl cellulose pseudolatexes. Int. J. Pharm. 70 (1991) 59-68
4. Bodmeier R., and Paeratakul O. Mechanical properties of dry and wet cellulosic and acrylic films prepared from aqueous colloidal polymer dispersions used in the coating of solid dosage forms. Pharm. Res. 11 (1994) 882-888
5. Budynas R.G. Advanced strength and applied stress analysis. 2nd ed. (1999), McGraw-Hill Company, Boston pp. 162-166
6. Clarke L.D. Plane and Geodetic Surveying for Engineers-Plane Surveying. 6th ed. vol. 1 (1983), CBS Publishers & Distributors, Delhi pp. 33-37
7. Costa L., Luda M.P., Trossarelli L., Brach del Prever E.M., Crova M., and Gallinaro P. Oxidation in orthopaedic UHMWPE sterilized by gamma radiation and ethylene oxide. Biomaterials 19 (1998) 659-668
8. Crowley M.M., Schroeder B., Fredersdorf A., Obara S., Talarico M., Kucera S., and McGinity J.W. Physico-chemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion. Int. J. Pharm. 269 (2004) 509-522
9. Duarte A.C., Gordillo M.D., Cardoso M.M., Simplicio A.L., and Duarte C.M.M. Preparation of ethyl cellulose/methyl cellulose blends by super critical antisolvent precipitation. Int. J. Pharm. 311 (2006) 50-54
10. Eldridge J.H., Hammond C.J., Meulbroek J.A., Staas J.K., Gilley R.M., and Tice T.R. Controlled vaccine release in the gut-associated lymphoid tissues. Part I. Orally administered biodegradable microspheres target the peyer's patches. J. Control. Rel. 11 (1990) 205-214
11. Fekete R., Marosi G., Fekete P., Dredán J., Marton S., and Antal I. Structural characteristics and permeability of ethyl cellulose films containing different plasticizers. Macromol. Symp. 239 (2006) 105-113
12. Fetscher A., and Schmidt P.C. Influence of water-soluble and water-insoluble plasticizers on the thermal and mechanical properties of methacrylate-copolymer films. Pharm. Ind. 61 (1999) 69-73
13. Frohoff-Hülsmann M.A., Schmitz A., and Lippold B.C. Aqueous ethyl cellulose dispersions containing plasticizers of different water solubility and hydroxypropyl methyl cellulose as coating material for diffusion pellets, part I: drug release rates from coated pellets. Int. J. Pharm. 177 (1999) 69-82
14. Frohoff-Hülsmann M.A., Lippold B.C., and McGinity J.W. Aqueous ethyl cellulose dispersions containing plasticizers of different water solubility and hydroxypropyl methyl cellulose as coating material for diffusion pellets, part II: properties of sprayed films. Eur. J. Pharm. Biopharm. 48 (1999) 67-75
15. Geres J.M., and Timoshenko S.P. Mechanics of Materials. 3rd ed. (1990), PWS-KENT Publishing Company, Boston pp. 116-125
16. Geres J.M., and Timoshenko S.P. Mechanics of Materials. 3rd ed. (1990), PWS-KENT Publishing Company, Boston pp. 3-27
17. Geres J.M., and Timoshenko S.P. Mechanics of Materials. 3rd ed. (1990), PWS-KENT Publishing Company, Boston pp. 33-35
18. Geres J.M., and Timoshenko S.P. Mechanics of Materials. 3rd ed. (1990), PWS-KENT Publishing Company, Boston pp. 22, 23
19. Geres J.M., and Timoshenko S.P. Mechanics of Materials. 3rd ed. (1990), PWS-KENT Publishing Company, Boston pp. 88-96
20. Geres J.M., and Timoshenko S.P. Mechanics of Materials. 3rd ed. (1990), PWS-KENT Publishing Company, Boston pp. 96-107
21. Gillis J., Jones G., and Pencharz P. Delivery of vitamins A. D and E in total parenteral nutrition solutions. J. Parenter. Enteral. Nutr. 7 (1983) 11-14
22. Gutiérrez-Rocca J.C., and McGinity J.W. Influence of water soluble and insoluble plasticizers on the physical and mechanical properties of acrylic resin copolymers. Int. J. Pharm. 103 (1994) 293-301
23. Harris M.R., and Ghebre-Sellassie I. Aqueous polymeric coating for modified release oral dosage forms. In: McGinity J.W. (Ed). Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms. 2nd ed. (1997), Marcel Dekker, New York 81-100
24. Higdon A., Ohlsen E.H., Stiles W.B., Weese J.A., and Riley W.F. Mechanics of Materials. 4th ed. (1985), John Wiley & Sons, New York pp. 107-109
25. Hyppölä R., Husson I., and Sundholm F. Evaluation of physical properties of plasticized ethyl cellulose films cast from ethanol solution. Part I. Int. J. Pharm. 133 (1996) 161-170
26. Jalsenjak I., Nicolaidou C.F., and Nixon J.R. Dissolution from tablets prepared using ethyl cellulose microcapsules. J. Pharm. Pharmacol. 29 (1997) 169-172
27. Kamal-Eldin A., and Appelqvist L. The chemistry and antioxidant properties of tocopherols and tocotrienols. Lipids 31 (1996) 671-701
28. Lecomte F., Siepmann J., Walther M., MacRae R.J., and Bodmeier R. Polymer blends used for the coating of multi-particulates: comparison of aqueous and organic coating techniques. Pharm. Res. 21 (2004) 882-890
29. Lecomte F., Siepmann J., Walther M., MacRae R.J., and Bodmeier R. Polymer blends used for the aqueous coating of solid dosage forms: importance of the type of plasticizer. J. Control. Rel. 99 (2004) 1-13
30. Leong C.W., Newton J.M., Basit A.W., Podczeck F., Cummings J.H., and Ring S.G. The formation of colonic digestible films of amylose and ethyl cellulose from aqueous dispersions at temperatures below 37 °C. Eur. J. Pharm. Sci. 54 (2002) 291-297
31. Lippold B.C., Lippold B.H., Sutter B.K., and Gunder W. Properties of aqueous, plasticizer-containing ethyl cellulose dispersions and prepared films in respect to the production of oral extended release formulations. Drug Dev. Ind. Pharm. 16 (1990) 1725-1747
32. Lippold B.H., Sutter B.K., and Lippold B.C. Parameters controlling drug release from pellets coated with aqueous ethyl cellulose dispersion. Int. J. Pharm. 54 (1989) 15-25
33. Nesbitt R.U. Effect of formulation components on drug release from multi particulates. Drug Dev. Ind. Pharm. 20 (1994) 3207-3236
34. Oral E., Wannomae K.K., Hawkins N.E., Harris W.H., and Muratoglu O.K. α-Tocopherol doped irradiated UHMWPE for high fatigue resistance and low wear. Biomaterials 25 (2004) 5515-5522
35. Oral E., Christensen S., Malhi A., Wannomae K., and Muratoglu O.K. Wear resistance and mechanical properties of highly cross-linked UHMWPE doped with vitamin E. J. Arthr. 21 (2006) 580-591
36. Oral E., Rowell S.L., and Muratoglu O.K. The effect of α-tocopherol on the oxidation and free radical decay in irradiated UHMWPE. Biomaterials 27 (2006) 5580-5587
37. Oral E., Wannomae K.K., Rowell S.L., and Muratoglu O.K. Migration stability of α-tocopherol in irradiated UHMWPE. Biomaterials 27 (2006) 2434-2439
38. Ozturk A.G., Ozturk S.S., Palsson B.O., Wheatley T.A., and Dressman J.B. Mechanism of release from pellets coated with an ethyl cellulose-based film. J. Control. Rel. 14 (1990) 203-304
39. Packer L. Protective role of vitamin E in biological systems. Am. J. Clin. Nutr. 53 (1991) 1050S-1055S
40. Pollard T.D., and Earnshaw W.C. Cell Biology (2002), Saunders, Philadelphia pp. 91-98
41. Rekhi G.S., and Jambhekar S.S. Ethyl cellulose-a polymer review. Drug Dev. Ind. Pharm. 2 (1995) 61-77
42. Reno F., and Cannas M. UHMWPE and vitamin E bioactivity: an emerging perspective. Biomaterials 27 (2006) 3039-3043
43. Siepmann F., Siepmann J., Walther M., MacRae R.J., and Bodmeier R. Blends of aqueous polymer dispersions used for pellet coating: Importance of particle size. J. Control. Rel. 105 (2005) 226-239
44. Sinko P.J. Martin's Physical Pharmacy and Pharmaceutical Sciences. 5th ed. (2006), Lippincott Williams & Wilkins, Baltimore pp. 611-613
45. Tarvainen M., Sutinen R., Peltonen S., Mikkonen H., Maunus J., Vähä-Heikkilä K., Lehto V.P., and Paronen P. Enhanced film-forming properties for ethyl cellulose and starch acetate using n-alkenyl succinic anhydrides as novel plasticizers. Eur. J. Pharm. Sci. 19 (2003) 363-371
46. Timoshenko S.P., and Woinowsky-krieged S. Theory of Plates and Shells. 2nd ed. (1959), McGraw-Hill Company, Auckland pp. 429-447, 533-537
47. Wade A., and Weller P.J. Hand Book of Pharmaceutical Excipients. 2nd ed. (1994), American Pharmaceutical Association, Washington pp. 186-190
48. Wheatley T.A., and Steuernagel C.R. Latex emulsions for controlled drug delivery. In: McGinity J.W. (Ed). Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms. 2nd ed. (1997), Marcel Dekker, New York 1-54
49. Wolf C., Maringer J., Lederer K., Frühwirth-Smounig H., Gamse T., and Marr R. Stabilization of cross-linked ultra-high molecular weight polyethylene (UHMW-PE)-acetabular components with α-tocopherol. J. Mater. Sci. Mater. M. 17 (2006) 1323-1331