Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles

Composites Part A: Applied Science and Manufacturing

Volumn 39, Issue 5, 2008, Pages 856-865

  Nam, Tran Huu ^a,b   Requena, Guillermo ^a   Degischer, Peter ^a  

^a VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

^b HANOI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Viet Nam)

Author keywords

A. Metal matrix composites; B. Porosity; C. Finite element analysis; Thermal expansion

Indexed keywords

FINITE ELEMENT METHOD; POROSITY; SILICON CARBIDE; STRAIN RATE; THERMAL EXPANSION; THERMOELASTICITY;

ALUMINUM MATRIX COMPOSITES; ROOM TEMPERATURE (RT); THERMOELASTIC MODELS; TWO-DIMENSIONAL UNIT CELLS;

METALLIC MATRIX COMPOSITES;

EID: 41949087653     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2008.01.011     Document Type: Article

References (34)

1. Girot F., Quenisset J., and Nashlain R. Discontinuous-reinforced aluminum matrix composites. J Comp Sci Tech 30 (1987) 155-184
2. Fridlymander J.N. Metal matrix composites (1995), Chapman and Hall, Oxford
3. Elomari S., Skibo M., Sundarrajan A., and Richards H. Thermal expansion behaviour of particulate metal-matrix composites. Comp Sci Tech 58 (1998) 369-376
4. Evans A., San Marchi C., and Mortensen A. Metal matrix composites in industry: an introduction and a survey (2003), Springer
5. Zweben C. Metal-matrix composites for electronic packaging. J Metals 44 (1992) 15-23
6. Clynej T. An introductory overview of MMC systems, types, and developments. In: Kelly A., and Zweben C. (Eds). Comprehensive composite materials vol. 3 (2000), Elsevier Science, Oxford
7. Delannay A. Thermal stresses and thermal expansion in MMCs. In: Kelly A., and Zweben C. (Eds). Comprehensive composite materials vol. 3 (2000), Elsevier Science, Oxford
8. Huber T., Degischer H.P., Lefranc G., and Schmitt T. Thermal expansion studies of aluminum-matrix composites with different reinforced architecture of SiC particles. Comp Sci Technol 66 (2006) 2206-2217
9. Balch D., Fitzgerald T., Michaud V., Mortensen A., Shen Y L., and Suresh S. Thermal expansion of metals reinforced with ceramic particles and microcellular foams. Metallur Trans 11 27A (1996) 3700-3717
10. Huber T., Knoblich H., and Degischer H.P. Characterization of the microstructure of Al/SiCp metal-matrix composites. Int J Mater Prep Image Anal Microstr 40 (2003) 432-442
11. Shen Y. Combined effects of microvoids and phase contiguity on the thermal expansion of metal-ceramic composites. Mater Sci Eng A 237 (1997) 102-108
12. Shen Y. Thermal expansion of metal-ceramic composites: a three-dimensional analysis. Mater Sci Eng A 252 (1998) 269-275
13. Frei W., Hu M., and Yao C. Thermal expansion and thermal mismatch stress relaxation behaviours of SiC whisker reinforced aluminium composite. Mater Chem Phys 77 (2002) 882-888
14. Zhang Q., Wu G., Jiang L., and Chen G. Thermal expansion and dimensional stability of Al-Si matrix composite reinforced with high content SiC. Mater Chem Phys 82 (2003) 780-785
15. Zhang Q., Wu G., Chen G., Jiang L., and Luan B. The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology. Composites A 34 (2003) 1023-1027
16. Arpón R., Molina J., Saravanan R., García-Cordovilla C., Louis E., and Narciso J. Thermal expansion behaviour of Al/SiC composites with bimodal particle distributions. Acta Mater 51 (2003) 3145-3156
17. Shu K., and Tu G. The microstructure and the thermal expansion characteristics of Cu/SiCp composites. Mater Sci Eng A 349 (2003) 236-247
18. Kerner E. The elastic and thermo-elastic properties of composite media. Proc Phys Soc B 69 (1956) 808-813
19. Schapery R. Thermal expansion coefficients of composite materials based on energy principles. J Comp Mater 2 3 (1968) 380-404
20. Turner P. Thermal-expansion stresses in reinforced plastics. J Re Nat Bu Stan 37 (1946) 239-250
21. Hsieh C., and Tuan W. Elastic and thermal expansion behaviour of two-phase composites. Mater Sci Eng A 425 (2006) 349-360
22. Karadeniz Z., and Kumlutas D. A numerical study on the coefficient of thermal expansion of fiber reinforced composite materials. Compos Struct 78 (2007) 1-10
23. Ismar H., and Schröter F. Modelling and numerical simulation of the thermomechanical cyclical behavior of a cross-ply MMC. Comput Mater Sci 16 (1999) 259-266
24. Bruzzi M., McHugh P., O'Rourke F., and Linder T. Micromechanical modeling of the static and cyclic loading of an Al 2124-SiC MMC. Int J Plast 17 (2001) 565-599
25. Böhm H., Eckschlager A., and Han W. Multi-inclusion unit cell models for metal matrix composites with randomly oriented discontinuous reinforcements. Comput Mater Sci 25 (2002) 42-53
26. Mondal D., Ramakrishnan N., and Das S. Finite element modelling of the interface and its effect on the elasto-plastic behavior of metal matrix composites. Mater Sci Eng A 433 (2006) 286-290
27. Kenesei P., Borbély A., and Biermann H. Microstructure based three-dimensional finite element modeling of particulate reinforced metal-matrix composites. Mater Sci Eng A 387 (2004) 852-856
28. Chawla N., Ganesh V., and Wunsch B. Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behavior of SiC particle reinforced aluminum composites. Scripta Mater 51 (2004) 161-165
29. Chawla N., Deng X., and Schnell D. Thermal expansion anisotropy in extruded SiC particle reinforced 2080 aluminum alloy matrix composites. Mater Sci Eng A 426 (2006) 314-322
30. Schöbel M., Requena G., Degischer H.P., Kaminski H., Buslaps T., and Michiel M. Thermische Ausdehnung, innere Spannungen und Porenverteilung in AlSiCp Metallmatrixverbundwerkstoffen. Mater Sci Eng Technol (2007) 38
31. Hashin Z., and Shtrikman S. A variational approach to the elastic behavior of multiphase materials. J Mech Phys Solids 11 (1963) 127-140
32. Chinh N., Illy J., Horita Z., and Langdon T. Using the stress-strain relationships to propose regions of low and high temperature plastic deformation in aluminium. Mater Sci Eng A 410-411 (2005) 234-238
33. Bauccio M. ASM engineered materials reference book. 2nd ed. (1994), ASM International Materials Park
34. Kumar S., Dieringa H., and Kainer K.U. Effect of particulate content on the thermal cycling behaviour of the magnesium alloy based hybrid composites. Composites A 36 (2005) 321-325