Wear of an experimental metal-on-metal artificial disc for the lumbar spine

Spine

Volumn 33, Issue 6, 2008, Pages 597-606

  Lee, Jessica L ^a   Billi, Fabrizio ^a   Sangiorgio, Sophia N ^a   McGarry, William ^a   Krueger, David J ^b   Miller, Peter T ^b   McKellop, Harry ^a   Ebramzadeh, Edward ^a  

^a JOINT REPLACEMENT INSTITUTE   (United States)

^b Abbott Spine   (United States)

Author keywords

Artificial disc; Biomechanics; Lumbar spine; Metal onmetal; Wear simulation

Indexed keywords

CARBON;

ARTICLE; CLEARANCE; INTERVERTEBRAL DISK; LUMBAR DISK; LUMBAR SPINE; METAL IMPLANTATION; ORTHOPEDIC PROSTHESIS; PRIORITY JOURNAL; PROSTHESIS FIXATION; PROSTHESIS MATERIAL; SIMULATOR;

LUMBAR VERTEBRAE; MATERIALS TESTING; METALS; PROSTHESES AND IMPLANTS; PROSTHESIS DESIGN; WEIGHT-BEARING;

EID: 41349118316     PISSN: 03622436     EISSN: 15281159     Source Type: Journal    
DOI: 10.1097/BRS.0b013e318166aaa4     Document Type: Article

References (65)

1. Valdevit A, Errico TJ. Design and evaluation of the FlexiCore metal-on-metal intervertebral disc prosthesis. Spine J 2004;4:276S-288S.
2. Mathews HH, Lehuec JC, Friesem T, et al. Design rationale and biomechanics of Maverick total disc arthroplasty with early clinical results. Spine J 2004;4:268S-275S.
3. Scholes SC, Green SM, Unsworth A. The wear of metal-on-metal total hip prostheses measured in a hip simulator. Proc Inst Mech Eng [H] 2001;215:523-30.
4. Tipper JL, Firkins PJ, Ingham E, et al. Quantitative analysis of the wear and wear debris from low and high carbon content cobalt chrome alloys used in metal on metal total hip replacements. J Mater Sci Mater Med 1999;10:353-62.
5. Dumbleton JH, Shen C. A study of the wear of some materials in connection with total hip replacement. Wear 1974;29:163-71.
6. Anissian HL, Stark A, Gustafson A, et al. Metal-on-metal bearing in hip prosthesis generates 100-fold less wear debris than metal-on-polyethylene. Acta Orthop Scand 1999;70:578-82.
7. Clarke IC, Good V, Williams P, et al. Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements. Proc Inst Mech Eng [H] 2000;214:331-47.
8. Goldsmith AA, Dowson D, Isaac GH, et al. A comparative joint simulator study of the wear of metal-on-metal and alternative material combinations in hip replacements. Proc Inst Mech Eng [H] 2000;214:39-47.
9. Jacobs MA, Schmidt MB, Farrar R. Comparison of wear rates for metal-on-polyethylene and metal-on-metal hips. AAHKS Sixth Annual Meeting 1997.
10. Essner A, Sutton K, Wang A. Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings. Wear 2005;259:992-5.
11. Saikko V. A 12-station anatomic hip joint simulator. Proc Inst Mech Eng [H] 2005;219:437-48.
12. Chan FW, Bobyn JD, Medley JB, et al. Engineering issues and wear performance of metal on metal hip implants. Clin Orthop Relat Res 1996;96-107.
13. Chan FW, Bobyn JD, Medley JB, et al. The Otto Aufranc Award. Wear and lubrication of metal-on-metal hip implants. Clin Orthop Relat Res 1999;10-24.
14. Dowson D, Hardaker C, Flett M, et al. A hip joint simulator study of the performance of metal-on-metal joints: Part I: the role of materials. J Arthroplasty 2004;19:118-23.
15. Firkins PJ, Tipper JL, Saadatzadeh MR, et al. Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator. Biomed Mater Eng 2001;11:143-57.
16. Wang A, Yue S, Bobyn JD, et al. Surface characterization of metal-on-metal hip implants tested in a hip simulator. Wear 1999;225-229:708-15.
17. Dowson D, Hardaker C, Flett M, et al. A hip joint simulator study of the performance of metal-on-metal joints: Part II: design. J Arthroplasty 2004; 19:124-30.
18. McKellop H, Park SH, Chiesa R, et al. In vivo wear of three types of metal on metal hip prostheses during two decades of use. Clin Orthop Relat Res 1996;S128-S140.
19. Medley JB, Chan FW, Krygier JJ, et al. Comparison of alloys and designs in a hip simulator study of metal on metal implants. Clin Orthop Relat Res 1996;S148-S159.
20. Smith SL, Dowson D, Goldsmith AA. The effect of femoral head diameter upon lubrication and wear of metal-on-metal total hip replacements. Proc Inst Mech Eng [H] 2001;215:161-70.
21. Kurtz SM, Peloza J, Siskey R, et al. Analysis of a retrieved polyethylene total disc replacement component. Spine J 2005;5:344-50.
22. Thierry D. Revision of a Charite artificial disc 9.5 years in vivo to a new Charite artificial disc: case report and explant analysis. Eur Spine J 2005.
23. Kurtz SM, van Ooij A, John P, et al. Central core and rim damage in retrieved polyethylene total disc replacement components. Proceedings of the NASS 20th Annual Meeting. Spine J 2005;5:1S-189S.
24. Kurtz SM, McCombe P, Ciccarelli L, et al. Retrieval analysis of short-term implanted Maverick total disc arthroplasty. Proceedings of the NASS 20th Annual Meeting. Spine J 2005;5:1S-189S.
25. Dooris AP, Ares PJ, Gabriel SM, et al. Wear characterization of an artificial disc using ASTM guidelines. 51st Annual Meeting of the Orthopaedic Research Society 2005;Poster 1335.
26. Serhan HA, Dooris AP, Ares PJ, et al. Wear characterization of the Charite Artificial Disc using ASTM guidelines. Proceedings of the NASS 20th Annual Meeting. Spine J 2005;5:1S-189S.
27. Nechtow W, Hintner M, Bushelow M, et al. IVD replacement mechanical performance depends strongly on input parameters. 52nd Annual Meeting of the Orthopaedic Research Society 2006;Paper No: 0118.
28. Sethi RK, Neavyn MJ, Rubash HE, et al. Macrophage response to cross-linked and conventional UHMWPE. Biomaterials 2003;24:2561-73.
29. Stea S, Visentin M, Granchi D, et al. Apoptosis in peri-implant tissue. Biomaterials 2000;21:1393-8.
30. Shanbhag AS, Jacobs JJ, Black J, et al. Effects of particles on fibroblast proliferation and bone resorption in vitro. Clin Orthop Relat Res 1997;205-17.
31. Masse A, Bosetti M, Buratti C, et al. Ion release and chromosomal damage from total hip prostheses with metal-on-metal articulation. J Biomed Mater Res B Appl Biomater 2003;67:750-7.
32. Milosev I, Pisot V, Campbell P. Serum levels of cobalt and chromium in patients with Sikomet metal-metal total hip replacements. J Orthop Res 2005;23:526-35.
33. Dunstan E, Sanghrajka AP, Tilley S, et al. Metal ion levels after metal-on-metal proximal femoral replacements: a 30-year follow-up. J Bone Joint Surg Br 2005;87:628-31.
34. Dobbs HS, Minski MJ. Metal ion release after total hip replacement. Biomaterials 1980;1:193-8.
35. ASTM. F1714-96(2002) Standard guide for gravimetric wear assessment of prosthetic hip-designs in simulator devices. ASTM International Standards on Disc 2003;13.01.
36. Liao YS, McKellop H, Lu Z, et al. The effect of frictional heating and forced cooling on the serum lubricant and wear of UHMW polyethylene cups against cobalt-chromium and zirconia balls. Biomaterials 2003;24:3047-59.
37. Callaghan JP, Patla AE, McGill SM. Low back three-dimensional joint forces, kinematics, and kinetics during walking. Clin Biomech (Bristol, Avon) 1999;14:203-16.
38. Cappozzo A. Compressive loads in the lumbar vertebral column during normal level walking. J Orthop Res 1984;1:292-301.
39. Khoo BC, Goh JC, Lee JM, et al. A comparison of lumbosacral loads during static and dynamic activities. Australas Phys Eng Sci Med 1994;17:55-63.
40. Cappozzo A. The forces and couples in the human trunk during level walking. J Biomech 1983;16:265-77.
41. Cromwell R, Schultz AB, Beck R, et al. Loads on the lumbar trunk during level walking. J Orthop Res 1989;7:371-7.
42. Goh JH, Thambyah A, Bose K. Effects of varying backpack loads on peak forces in the lumbosacral spine during walking. Clin Biomech (Bristol, Avon) 1998;13:S26-S31.
43. Khoo BC, Goh JC, Bose K. A biomechanical model to determine lumbosacral loads during single stance phase in normal gait. Med Eng Phys 1995;17:27-35.
44. Turell M, Wang A, Bellare A. Quantification of the effect of cross-path motion on the wear rate of ultra-high molecular weight polyethylene. Wear 2003;255:1034-9.
45. ASTM. F2025-00 Standard practice for gravimetric measurement of polymeric components for wear assessment. ASTM International Standards on Disc 2003;13.01.
46. Firkins PJ, Tipper JL, Ingham E, et al. Influence of simulator kinematics on the wear of metal-on-metal hip prostheses. Proc Inst Mech Eng [H] 2001;215:119-21.
47. Williams S, Stewart TD, Ingham E, et al. Metal-on-metal bearing wear with different swing phase loads. J Biomed Mater Res B Appl Biomater 2004;70:233-9.
48. Schey JA. Systems view of optimizing metal on metal bearings. Clin Orthop Relat Res 1996;S115-27.
49. Scholes SC, Unsworth A, Goldsmith AA. A frictional study of total hip joint replacements. Phys Med Biol 2000;45:3721-35.
50. Scholes SC, Unsworth A, Hall RM, et al. The effects of material combination and lubricant on the friction of total hip prostheses. Wear 2000;241:209-13.
51. St John KR, Zardiackas LD, Poggie RA. Wear evaluation of cobalt-chromium alloy for use in a metal-on-metal hip prosthesis. J Biomed Mater Res B Appl Biomater 2004;68:1-14.
52. Wimmer MA, Sprecher C, Hauert R, et al. Tribochemical reaction on metal-on-metal hip joint bearings: a comparison between in-vitro and in-vivo results. Wear 2003;255:1007-14.
53. Walker PS, Salvati E, Hotzler RK. The wear on removed McKee-Farrar total hip prostheses. J Bone Joint Surg Am 1974;56:92-100.
54. Buscher R, Tager G, Dudzinski W, et al. Subsurface microstructure of metal-on-metal hip joints and its relationship to wear particle generation. J Biomed Mater Res B Appl Biomater 2005;72:206-14.
55. Walker PS, Gold BL. The tribology (friction, lubrication, and wear) of all-metal artificial hip joints. Wear 1971;17:285-99.
56. Howie DW, McCalden RW, Nawana NS, et al. The long-term wear of retrieved McKee-Farrar metal-on-metal total hip prostheses. J Arthroplasty 2005;20:350-7.
57. Bowsher JG, Shelton JC. A hip simulator study on the influence of patient activity level on the wear of crosslinked polyethylene under smooth and roughened femoral conditions. Wear 2001;250:167-79.
58. Koerten HK, Onderwater JJM, Koerten EWA, et al. Observations at the articular surface of hip prostheses: an analytical electron microscopy study on wear and corrosion. J Biomed Mater Res 2001;54:591-6.
59. Park S-H, McKellop H. Wear morphology of metal-metal-implants: hip simulator tests compared with clinical retrievals. In Jacobs JJ, Craig TL, eds. Alternative Bearing Surfaces in Total Joint Replacement. West Conshohocken: ASTM, 1998:129-43.
60. Schmidt M, Weber H, Schon R. Cobalt chromium molybdenum metal combination for modular hip prostheses. Clin Orthop Relat Res 1996;S35-S47.
61. Rieker CB, Schon R, Kottig P. Development and validation of a secondgeneration metal-on-metal bearing: laboratory studies and analysis of retrievals. J Arthroplasty 2004;19:5-11.
62. Hernandez-Rodriguez MAL, Mercado-Solis RD, Perez-Unzueta AJ, et al. Wear of cast metal-metal pairs for total replacement hip prostheses. Wear 2005;259:958-63.
63. Rieker CB, Schon R, Konrad R, et al. Influence of the clearance on in-vitro tribology of large diameter metal-on-metal articulations pertaining to resurfacing hip implants. Orthop Clin North Am 2005;36:135-42, vii.
64. Jacobs MA, Schmidt MB, Farrar R. The effect of clearance and diameter on debris generation in a metal-on-metal hip. J Arthroplasty 1998;13.
65. Fischer A, Wimmer MA. Differences in wear mechanisms between main contact areas and stripe wear regions in metal-on-metal hip joints. J Biomech 2006;39:S139.