-
1
-
-
0033293923
-
Development of automated fixture design systems with predefined fixture component types: Part 1, basic design
-
3/4
-
An Z, Huang S, Li J, Rong Y, Jayaram S (1999) Development of automated fixture design systems with predefined fixture component types: part 1, basic design. Int J Flex Autom Integr Manuf g, Vol. 7, No. 3/4, pp.321-341
-
(1999)
Int J Flex Autom Integr Manuf
, vol.7
, pp. 321-341
-
-
An, Z.1
Huang, S.2
Li, J.3
Rong, Y.4
Jayaram, S.5
-
3
-
-
0022074551
-
Kinematics analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures
-
2
-
Asada H, By A (1985) Kinematics analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures. Proc IEEE Int Conf Robot Autom RA-1(2):86-93, 1985
-
(1985)
Proc IEEE Int Conf Robot Autom
, vol.RA-1
, pp. 86-93
-
-
Asada, H.1
By, A.2
-
5
-
-
0030083491
-
A complete algorithm for synthesizing modular fixtures for polygonal parts
-
1
-
Brost RC, Goldberg KY (1996) A complete algorithm for synthesizing modular fixtures for polygonal parts. IEEE Trans Robot Autom 12(1):31-46
-
(1996)
IEEE Trans Robot Autom
, vol.12
, pp. 31-46
-
-
Brost, R.C.1
Goldberg, K.Y.2
-
6
-
-
0024771578
-
A mathematical approach to automatic configuration of machining fixtures: Analysis and synthesis
-
Chou YC Chandru V, Barash MM (1989) A mathematical approach to automatic configuration of machining fixtures: analysis and synthesis. J Eng Ind 111:299-306
-
(1989)
J Eng Ind
, vol.111
, pp. 299-306
-
-
Chou, Y.C.1
Chandru, V.2
Barash, M.M.3
-
7
-
-
84965395542
-
Automated fixture design for concurrent manufacturing planning
-
Chou YC (1993) Automated fixture design for concurrent manufacturing planning. Concurr Eng Res Appl 1:219-229
-
(1993)
Concurr Eng Res Appl
, vol.1
, pp. 219-229
-
-
Chou, Y.C.1
-
9
-
-
0036588314
-
Influence of friction damping on workpiece-fixture system dynamics and machining stability
-
Fang B, DeVor RE, Kapoor SG (2002) Influence of friction damping on workpiece-fixture system dynamics and machining stability. J Manuf Sci Eng 124:226-233
-
(2002)
J Manuf Sci Eng
, vol.124
, pp. 226-233
-
-
Fang, B.1
Devor, R.E.2
Kapoor, S.G.3
-
10
-
-
0000517925
-
Verification and optimization of workholding scheme for fixture design
-
Fuh JYH, Nee AYC (1994) Verification and optimization of workholding scheme for fixture design. J Des Manuf (4):307-318
-
(1994)
J des Manuf
, Issue.4
, pp. 307-318
-
-
Fuh, J.Y.H.1
Nee, A.Y.C.2
-
12
-
-
1842489620
-
Development of a variation fixture design technique
-
Worcester Polytechnic Institute
-
Han H, Rong Y (2003) Development of a variation fixture design technique. Research Report, Worcester Polytechnic Institute
-
(2003)
Research Report
-
-
Han, H.1
Rong, Y.2
-
13
-
-
0036588189
-
Modeling and analysis of the effect of fixture-workpiece conformability on static stability
-
Hurtado JF, Melkte SN (2002) Modeling and analysis of the effect of fixture-workpiece conformability on static stability. Trans ASME J Manuf Sci Eng 124:234-241, May 2002
-
(2002)
Transactions of the ASME, J Manuf Sci Eng
, vol.124
, pp. 234-241
-
-
Hurtado, J.F.1
Melkte, S.N.2
-
14
-
-
41149117728
-
Computer-aided fixture design verification, part 1: The framework and modeling; Part 2: Tolerance analysis; Part 3: Stability analysis
-
Kang Y, Rong Y, Yang J-C (2003) Computer-aided fixture design verification, part 1: the framework and modeling; part 2: tolerance analysis; part 3: stability analysis. Int J Adv Manuf Technol (to appear)
-
(2003)
Int J Adv Manuf Technol (To Appear)
-
-
Kang, Y.1
Rong, Y.2
Yang, J.-C.3
-
15
-
-
85124356973
-
An integrated computer-aided modular fixture design system for interference free design. ASME IMECE, Anaheim, CA, Nov. 15-20
-
Kow TS, Kumar AS, Fuh JYH (1998) An integrated computer-aided modular fixture design system for interference free design. ASME IMECE, Anaheim, CA, Nov. 15-20. Manuf Sci Eng, MED-8:909-916
-
(1998)
Manuf Sci Eng
, vol.8
, pp. 909-916
-
-
Kow, T.S.1
Kumar, A.S.2
Fuh, J.Y.H.3
-
16
-
-
4243529504
-
A framework for a variant fixture design system using case-based reasoning technique
-
Kumar AS, Nee AYC (1995) A framework for a variant fixture design system using case-based reasoning technique. Computer-aided Tooling, ASME WAM, MED 2-1:763-775, 1995
-
(1995)
Computer-aided Tooling, ASME WAM
, vol.2
, Issue.1
, pp. 763-775
-
-
Kumar, A.S.1
Nee, A.Y.C.2
-
17
-
-
0023348983
-
Finite element analysis of flexible fixturing systems
-
Lee JD, Haynes LS (1987) Finite element analysis of flexible fixturing systems. J Eng Ind 109:134-139
-
(1987)
J Eng Ind
, vol.109
, pp. 134-139
-
-
Lee, J.D.1
Haynes, L.S.2
-
18
-
-
0032598266
-
An elastic contact model for prediction of workpiece-fixture contact forces in clamping
-
Li B, Melkote SN (1999) An elastic contact model for prediction of workpiece-fixture contact forces in clamping. J Manuf Sci Eng 121:485-493
-
(1999)
J Manuf Sci Eng
, vol.121
, pp. 485-493
-
-
Li, B.1
Melkote, S.N.2
-
19
-
-
0034817049
-
An integrated model of a fixture-workpiece system for surface quality prediction
-
Liao YG, Hu SJ (2001) An integrated model of a fixture-workpiece system for surface quality prediction. Int J Adv Manuf Technol 17:810-818
-
(2001)
Int J Adv Manuf Technol
, vol.17
, pp. 810-818
-
-
Liao, Y.G.1
Hu, S.J.2
-
20
-
-
0031685933
-
FIX-DES: A computer-aided modular fixture configuration design system
-
Ma W, Lei Z, Rong Y (1998) FIX-DES: a computer-aided modular fixture configuration design system. Int J Adv Manuf Tech 14:21-32
-
(1998)
Int J Adv Manuf Tech
, vol.14
, pp. 21-32
-
-
Ma, W.1
Lei, Z.2
Rong, Y.3
-
21
-
-
0032661613
-
Development of automated fixture planning systems
-
Ma W, Li J, Rong Y (1999) Development of automated fixture planning systems. Int J Adv Manuf Technol 15:171-181, 1999
-
(1999)
Int J Adv Manuf Technol
, vol.15
, pp. 171-181
-
-
Ma, W.1
Li, J.2
Rong, Y.3
-
22
-
-
0036700521
-
Optimal placement of fixture clamps: Part 1, maintaining form closure and independent regions of form closure; Part 2, minimizing the maximum clamping forces
-
Marin RA, Ferreira PM (2002b) Optimal placement of fixture clamps: part 1, maintaining form closure and independent regions of form closure; part 2, minimizing the maximum clamping forces. J Manuf Sci Eng 124:676-694
-
(2002)
J Manuf Sci Eng
, vol.124
, pp. 676-694
-
-
Marin, R.A.1
Ferreira, P.M.2
-
23
-
-
0023855882
-
Strategies for the automated generation of modular fixtures
-
Markus A (1988) Strategies for the automated generation of modular fixtures. Proc Manuf Internal 97-103
-
(1988)
Proc Manuf Internal
, pp. 97-103
-
-
Markus, A.1
-
24
-
-
0031123097
-
Experimental measurement of precision bearing dynamic stiffness
-
1
-
Marsh ER, Yantek DS (1997) Experimental measurement of precision bearing dynamic stiffness. J Sound Vib 202(1):55-66
-
(1997)
J Sound Vib
, vol.202
, pp. 55-66
-
-
Marsh, E.R.1
Yantek, D.S.2
-
25
-
-
0020501159
-
Theory of finite element method for elastic contact problems of solid bodies
-
Mazurkiewicz M, Ostachowicz W (1983) Theory of finite element method for elastic contact problems of solid bodies. Computer Structure 17:51-59
-
(1983)
Computer Structure
, vol.17
, pp. 51-59
-
-
Mazurkiewicz, M.1
Ostachowicz, W.2
-
26
-
-
0025747167
-
A framework for an object/rule-based automated fixture design system
-
1
-
Nee AYC, Kumar AS (1991) A framework for an object/rule-based automated fixture design system. CIRP Ann 40(1):147-151
-
(1991)
CIRP Ann
, vol.40
, pp. 147-151
-
-
Nee, A.Y.C.1
Kumar, A.S.2
-
27
-
-
0009476748
-
Rules for an expert fixturing system on a CAD screen using flexible fixtures
-
Nnaji BO, Alladin S, Lyu P (1990) Rules for an expert fixturing system on a CAD screen using flexible fixtures. J Intelligent Manuf 1:31-48
-
(1990)
J Intelligent Manuf
, vol.1
, pp. 31-48
-
-
Nnaji, B.O.1
Alladin, S.2
Lyu, P.3
-
28
-
-
0025632170
-
AUTOFIX-an expert CAD system for jigs and fixtures
-
3
-
Pham DT, de Sam Lazaro A (1990) AUTOFIX-an expert CAD system for jigs and fixtures. Int J Mach Tools Manuf 30(3):403-411
-
(1990)
Int J Mach Tools Manuf
, vol.30
, pp. 403-411
-
-
Pham, D.T.1
De Sam Lazaro, A.2
-
29
-
-
0010845833
-
An application of group technology in computer-aided fixture design
-
4
-
Rong Y, Zhu Y (1992) An application of group technology in computer-aided fixture design. Inter J Syst Autom Res Appl 2(4):395-405
-
(1992)
Inter J Syst Autom Res Appl
, vol.2
, pp. 395-405
-
-
Rong, Y.1
Zhu, Y.2
-
30
-
-
0031139805
-
Automated generation of modular fixture configuration design
-
Rong Y, Bai Y (1997) Automated generation of modular fixture configuration design. J Manuf Sci Eng 119:208-219
-
(1997)
J Manuf Sci Eng
, vol.119
, pp. 208-219
-
-
Rong, Y.1
Bai, Y.2
-
32
-
-
1842541647
-
Four generations of computer-aided fixture design
-
Worcester Polytechnic Insititute
-
Rong Y (2003) Four generations of computer-aided fixture design. Research Report, Worcester Polytechnic Insititute
-
(2003)
Research Report
-
-
Rong, Y.1
-
33
-
-
0036487119
-
Fixturing analysis for stability consideration in an automated fixture design system
-
Roy U, Liao J (2002) Fixturing analysis for stability consideration in an automated fixture design system. J Manuf Sci Eng 124:98-104
-
(2002)
J Manuf Sci Eng
, vol.124
, pp. 98-104
-
-
Roy, U.1
Liao, J.2
-
34
-
-
0029489879
-
A modular fixture design system based on case-based reasoning
-
Sun SH, Chen JL (1995) A modular fixture design system based on case-based reasoning. Int J Adv Manuf Technol 10:389-395
-
(1995)
Int J Adv Manuf Technol
, vol.10
, pp. 389-395
-
-
Sun, S.H.1
Chen, J.L.2
-
35
-
-
0029423215
-
Computer-aided fixture analysis using finite element analysis and mathematical optimization modeling
-
Trappey AJC, Su CS, Hou JL (1995) Computer-aided fixture analysis using finite element analysis and mathematical optimization modeling. ASME INECE, MED 2-1:777-787, Nov. 12-17, 1995
-
(1995)
ASME INECE, MED
, vol.2
, Issue.1
, pp. 777-787
-
-
Trappey, A.J.C.1
Su, C.S.2
Hou, J.L.3
-
36
-
-
0025898224
-
Contact dynamics of a spherical joint and a jointed truss-cell unit system: Theory and stochastic simulation
-
1
-
Tzou HS, Rong Y (1991) Contact dynamics of a spherical joint and a jointed truss-cell unit system: theory and stochastic simulation. AIAA J 29(1):81-88, 1991
-
(1991)
AIAA J
, vol.29
, pp. 81-88
-
-
Tzou, H.S.1
Rong, Y.2
-
37
-
-
33748688919
-
Problems and solutions in the parameters of mechanical joints
-
June 13-18, Port Ludlow, WA, USA, ASME Paper No. ME 03
-
Wang JH, Yang MJ (1999) Problems and solutions in the parameters of mechanical joints. In the 3rd International Conference in Inverse Problem in Engineering: theory and practice, June 13-18, Port Ludlow, WA, USA, ASME Paper No. ME 03
-
(1999)
The 3rd International Conference in Inverse Problem in Engineering: Theory and Practice
-
-
Wang, J.H.1
Yang, M.J.2
-
38
-
-
41149128519
-
Optimal fixture design for drilling through deformable plate workpieces-part 1: Model formulation
-
1
-
Wardak et al (2001) Optimal fixture design for drilling through deformable plate workpieces-part 1: model formulation. J Manuf Syst 20(1):21-23
-
(2001)
J Manuf Syst
, vol.20
, pp. 21-23
-
-
Wardak1
-
40
-
-
0030693556
-
Automated generation of dedicated fixture configura-tion
-
3/4
-
Wu Y, Rong Y, Chu T (1997) Automated generation of dedicated fixture configuration. Int J Comput Appl Technol 10(3/4):213-235
-
(1997)
Int J Comput Appl Technol
, vol.10
, pp. 213-235
-
-
Wu, Y.1
Rong, Y.2
Chu, T.3
-
41
-
-
0031994379
-
Automated modular fixture design: Part 1, geometric analysis; Part 2, accuracy, clamping, and accessibility analysis
-
Wu Y, Rong Y, Ma W, LeClair S (1998) Automated modular fixture design: part 1, geometric analysis; part 2, accuracy, clamping, and accessibility analysis. Robot Comput-Integr Manuf 14:1-26
-
(1998)
Robot Comput-Integr Manuf
, vol.14
, pp. 1-26
-
-
Wu, Y.1
Rong, Y.2
Ma, W.3
Leclair, S.4
-
42
-
-
0032047386
-
Stability index and contact configuration planning for multifingered grasp
-
4
-
Xiong C, Xiong Y (1998) Stability index and contact configuration planning for multifingered grasp. J Robot Syst 15(4):183-190
-
(1998)
J Robot Syst
, vol.15
, pp. 183-190
-
-
Xiong, C.1
Xiong, Y.2
-
43
-
-
0033131631
-
Contact condition modeling for machining fixture setup processes
-
Yeh JH, Liou FW (1999) Contact condition modeling for machining fixture setup processes. Int J Mach Tools Manuf 39:787-803
-
(1999)
Int J Mach Tools Manuf
, vol.39
, pp. 787-803
-
-
Yeh, J.H.1
Liou, F.W.2
-
44
-
-
0003446519
-
Experimental study on fixturing stiffness of T-slot based modular fixtures
-
NAMRC, Stillwater, OK, May 19-21
-
Zhu Y, Zhang S, Rong Y (1993) Experimental study on fixturing stiffness of T-slot based modular fixtures. NAMRI Transactions XXI, NAMRC, Stillwater, OK, May 19-21, pp 231-235
-
(1993)
NAMRI Transactions XXI
, pp. 231-235
-
-
Zhu, Y.1
Zhang, S.2
Rong, Y.3
|