Self-sensing actuation with adaptive control in applications with switching trajectory

IEEE/ASME Transactions on Mechatronics

Volumn 13, Issue 1, 2008, Pages 104-111

  Putra, Andi Sudjana ^a   Huang, Sunan ^a   Tan, Kok Kiong ^a   Panda, Sanjib Kumar ^a   Lee, Tong Heng ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

Adaptive controller; Microdispensing; Piezoelectric actuator; Self sensing actuation; Smart materials

Indexed keywords

ADAPTIVE CONTROL SYSTEMS; INTELLIGENT CONTROL; INTELLIGENT MATERIALS; MECHATRONICS;

MICRODISPENSING; SELF-SENSING ACTUATION;

PIEZOELECTRIC ACTUATORS;

EID: 40849097629     PISSN: 10834435     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMECH.2008.917183     Document Type: Article

References (25)

1. J. Wikander, "Autonomous mechatronic actuators as a basis for modular intelligent machines," in Proc. Int. Conf. Indust. Electron., Cont., Instr., Nov. 1993, Maui, HI, pp. 21-26.
2. T. Takigami, K. Oshima, Y. Hayakawa, and M. Ito, "Application of self-sensing actuator to control of a soft-handling gripper," in Proc. 1998 IEEE Int. Conf. Cont. Appl., Trieste, Italy, pp. 902-906.
3. H. Wulp, "Piezo-driven stages for nanopositioning with extreme stability: Theoretical aspects and practical design considerations," Delft Univ. Technol., Delft, The Netherlands, pp. 16-19, 1997.
4. J. J. Dosch, D. J. Inman, and E. Garcia, "A self-sensing piezoelectric actuator for colocated control," J. Intel. Mater. Struc., vol. 3, no. 1, pp. 166-185, Jan. 1992.
5. C. Guo and J. Tani, "Sensorless vibration control of a cantilever beam," in Proc. 71st Ann. Conf. Japanese Soc. Mech. Eng. II, 1994, pp. 669-671.
6. E. H. Anderson, "Self-sensing piezoelectric actuator: Analysis and application to controlled structure," in Proc. 33rd Struc. Dynam. Mater. Conf., 1992, pp. 2141-2155.
7. L. Jones, E. Garcia, and H. Waites, "Self-sensing control as applied to a PZT stack actuator used as a micropositioner," Smart Mater. Struc. vol. 3, no. 2, pp. 147-156, Jun. 1994.
8. G. Percin and B. T. Khuri-Yakub, "Piezoelectrically actuated flextensional micromachined ultrasound droplet ejectors," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 49, no. 6, pp. 756-766, Jun. 2002.
9. X. B. Chen and J. Kai, "Modeling of positive-displacement fluid dispensing processes," IEEE Trans. Electron. Pack. Manuf., vol. 27, no. 3, pp. 157-163, Jul. 2004.
10. M. Budinger, J.-F. Rouchon, and B. Nogarede, "Analytical modeling for the design of a piezoelectric rotating-mode motor," IEEE/ASAME Trans. Mechatron., vol. 9, no. 1, pp. 1-9, Mar. 2004.
11. R. -J. Wai, C. -M. Lin, and Y.-F. Peng, "Adaptive hybrid control for linear piezoelectric ceramic motor drive using diagonal recurrent CMAC network," IEEE Trans. Neural Net., vol. 15, no. 6, pp. 1491-1506, Nov. 2004.
12. K. J. Yoon, K. H. Park, S. K. Lee, N. S. Goo, and H. C. Park, "Analytical design model for a piezo-composite unimorph actuator and its verification using lightweight piezo-composite curved actuators," Smart Mater. Struct., vol. 13, no. 3, pp. 459-467, Jun. 2004.
13. D. J. Hayes, D. B. Wallace, and W. R. Cox, "MicroJet printing of solder and polymers for multi-chip modules and chip-scale packages," in Proc. IMAPS Int. Conf. High Dens. Pack. MCMs, Apr. 1999, pp. 1-6.
14. J. B. Szczech, C. M. Megaridis, D. R. Gamota, and J. Zhang, "Fine-line conductor manufacturing using drop-on-demand PZT printing technology," IEEE Trans. Elect. Pack. Manuf., vol. 25, no. 1, pp. 26-33, Jan. 2002.
15. K. K. Tan, Q. G. Wang, and C. C. Hang, Advances in PID Control (Advances in Industrial Control Series). New York: Springer-Verlag, 1999.
16. T. S. Low and W. Guo, "Modeling of a three-layer piezoelectric bimorph beam with hysteresis," J. Microelectromech. Syst., vol. 4, no. 4, pp. 230-237, Dec. 1995.
17. W. W. Law, W. H. Liao, and J. Huang, "Vibration control of structures with self-sensing piezoelectric actuators incorporating adaptive mechanism," Smart Mater. Struc., vol. 12, no. 5, pp. 720-730, Oct. 2003.
18. C. K. Pang, G. Guo, B. M. Chen, and T. H. Lee, "Self-sensing actuation for nanopositioning and active-mode damping in dual-stage HDDs," IEEE/ASME Trans. Mechatro., vol. 11, no. 3, pp. 328-338, Jun. 2006.
19. Z. Wang, D. W. C. Ho, and X. Liu, "Robust filtering under randomly varying sensor delay with variance constraints," IEEE Trans. Circ. Syst. II, vol. 51, no. 6, pp. 320-326, Jun. 2004.
20. D. E. Davison and D. Gaudette, "Tumor-tracking in radiotherapy: Parameterization of sensor time-delay compensators and associated performance limitations," in Proc. 2005 IEEE Conf. Cont. Appl., Toronto, Canada, pp. 131-136.
21. W. W. Kwok and D. E. Davison, "A separation principle associated with sensor time delay compensation in feedback control," in Proc. 2006 IEEE Conf. Cont. Appl., Munich, Germany, pp. 3194-3199.
22. D. Du, C. Wu, X. Luo, and X. Zuo, "Delay time identification and dynamic characteristics study on ANN soft sensor," in Proc. 6th Int. Conf. Intell. Syst. Des. Appl., Oct. 2006, pp. 42-45.
23. R. E. Precup, S. Preitl, and P. Korondi, "Fuzzy controller with maximum sensitivity for servosystems," IEEE Trans. Ind. Elect., vol. 54, no. 3, pp. 1298-1310, Jun. 2007.
24. G. R. Yu and R. C. Hwang, "Optimal PID speed control of brushless DC motors using LQR approach," in Proc. IEEE Int. Conf. Syst., Man, Cyb., Oct. 2004, vol. 1, pp. 473-478.
25. J. B. He, Q. G. Wang, and T. H. Lee, "PI/PID controller tuning via LQR approach," in Proc. 37th IEEE Conf. Decision Contr., Dec. 1998, vol. 1, pp. 1177-1182.