The strain energy release approach for modeling cracks in rotors: A state of the art review

Mechanical Systems and Signal Processing

Volumn 22, Issue 4, 2008, Pages 763-789

  Papadopoulos, Chris A ^a  

^a UNIVERSITY OF PATRAS   (Greece)

Author keywords

Breathing crack; Compliance matrix; Crack; Fracture; Rotor; Strain energy release rate (SERR)

Indexed keywords

CRACKS; FAILURE ANALYSIS; FRACTURE; FRACTURE MECHANICS; REGULATORY COMPLIANCE; STRAIN ENERGY;

BREATHING CRACKS; COMPLIANCE MATRIX; ROTORDYNAMICS; STRAIN ENERGY RELEASE RATE (SERR);

ROTORS;

EID: 39649117952     PISSN: 08883270     EISSN: 10961216     Source Type: Journal    
DOI: 10.1016/j.ymssp.2007.11.009     Document Type: Article

References (149)

1. Griffith A.A. The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character 221 (1921) 163-198
2. Irwin G.R. Analysis of stresses and strains near the end of a crack traversing a plate. Applied Mechanics 24 (1957) 361-364
3. Ya S. On the contribution of G.R. Irwin to fracture mechanics. Materials Science 31 5 (1996) 617-623
4. Paris P.C. Cleavage fracture: an overview of some historical aspects to honor G. R. Irwin. Engineering Fracture Mechanics 59 4 (1998) 411-413
5. Rice J.R. A path independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics (1968)
6. Rice J.R., and Levy N. The part-through a surface crack transversing an elastic plate. Journal of Applied Mechanics 39 (1972) 185-194
7. Wells A.A. Fracture control: Past, present and future. Experimental Mechanics 13 10 (1973) 401-410
8. Shih C.F. Relationships between the J-integral and the crack opening displacement for stationary and extending cracks. Journal of the Mechanics and Physics of Solids 29 4 (1981) 305-326
9. Dimarogonas A.D. Vibration of cracked structures: a state of the art review. Engineering Fracture Mechanics 55 5 (1996) 831-857
10. Wauer J. On the dynamics of cracked rotors: a literature survey. Applied Mechanics Review 43 1 (1990) 13-17
11. Gasch R. A survey of the dynamic behaviour of a simple rotating shaft with a transverse crack. Journal of Sound and Vibration 160 2 (1993) 313-332
12. Dimarogonas A.D., and Paipetis S.A. Analytical Methods in Rotor Dynamics (1983), Applied Science Publishers, London
13. Dimarogonas A.D., and Papadopoulos C.A. Vibration of cracked shafts in bending. Journal of Sound and Vibration 91 4 (1983) 583-593
14. Papadopoulos C.A., and Dimarogonas A.D. Coupling of bending and torsional vibration of a cracked Timoshenko shaft. Archive of Applied Mechanics (Ingenieur Archiv) V57 4 (1987) 257-266
15. Papadopoulos C.A., and Dimarogonas A.D. Coupled longitudinal and bending vibrations of a rotating shaft with an open crack. Journal of Sound and Vibration 117 1 (1987) 81-93
16. Tada H., Paris P.C., and Irwin G.R. The Stress Analysis of Cracks Handbook (1973), Paris Productions, Pennsylvania Del Research Corporation
17. Bachschmid N., and Tanzi E. Deflections and strains in cracked shafts due to rotating loads: a numerical and experimental analysis. International Journal of Rotating Machinery 10 4 (2004) 283-291
18. Papadopoulos C.A., and Dimarogonas A.D. Stability of cracked rotors in the coupled vibration mode. American Society of Mechanical Engineers, Design Engineering Division (Publication) DE 2 pt 1 (1987) 25-34
19. Papadopoulos C.A., and Dimarogonas A.D. Stability of cracked rotors in the coupled vibration mode. Journal of Vibration Acoustics Stress and Reliability in Design-Transactions of the ASME 110 3 (1988) 356-359
20. Papadopoulos C.A., and Dimarogonas A.D. Coupled longitudinal and bending vibrations of a cracked shaft. Journal of Vibration, Acoustics, Stress, and Reliability in Design 110 1 (1988) 1-8
21. Papadopoulos C.A., and Dimarogonas A.D. Coupled vibration of cracked shafts. American Society of Mechanical Engineers, Design Engineering Division (Publication) DE 18-2 (1989) 7-12
22. Theis W. Langs-Und Torsions-Schwingungen Bei Quer Angerissenen Rotoren Untersuchungen Auf Der Grundlage Eines Ribmodells Mit 6 Balkenfreiheitsgraden. Fortschritt-Berichte VDI 11 131 (1990) 1-140
23. Chasalevris A.C., and Papadopoulos C.A. Identification of multiple cracks in beams under bending. Mechanical Systems and Signal Processing 20 7 (2006) 1631-1673
24. Abraham O.N.L., Brandon J.A., and Cohen A.M. Remark on the determination of compliance coefficients at the crack section of a uniform beam with circular cross-section. Journal of Sound and Vibration 169 4 (1994) 570-574
25. Dimarogonas A.D. Author's Reply. Journal of Sound and Vibration 169 4 (1994) 575-576
26. Papadopoulos C.A. Some comments on the calculation of the local flexibility of cracked shafts. Journal of Sound and Vibration 278 4-5 (2004) 1205-1211
27. Gounaris G., Anifantis N., and Dimarogonas A.D. Dynamics of cracked hollow beams. Engineering Fracture Mechanics 39 6 (1991) 931-940
28. Zheng D.Y., and Fan S.C. Vibration and stability of cracked hollow-sectional beams. Journal of Sound and Vibration 267 4 (2003) 933-954
29. D. Zheng, N.J. Kessissoglou, Free vibration analysis of a cracked hollow circular beam by finite element method, in: Proceedings of the 10th International Congress on Sound and Vibration, 2003, pp. 437-444.
30. Andrieux S., and Varé C. A 3D cracked beam model with unilateral contact. Application to rotors. European Journal of Mechanics-A: Solids 21 5 (2002) 793-810
31. Hamidi L., Piaud J.B., and Pastorel H. Modal parameters for cracked rotors: models and comparisons. Journal of Sound and Vibration 175 2 (1994) 265-278
32. Darpe A.K., Gupta K., and Chawla A. Coupled bending, longitudinal and torsional vibrations of a cracked rotor. Journal of Sound and Vibration 269 1-2 (2004) 33-60
33. Gounaris G., and Dimarogonas A. A finite element of a cracked prismatic beam for structural analysis. Computers & Structures 28 3 (1988) 309-313
34. Papaeconomou N., and Dimarogonas A.D. Vibration of cracked beams. Computational Mechanics V5 2 (1989) 88-94
35. Suh M., Shim M., and Kim M. Crack identification using hybrid neuro-genetic technique. Journal of Sound and Vibration 238 4 (2000) 617-635
36. Shim M., and Suh M. A study on multiobjective optimization technique for inverse and crack identification problems. Inverse Problems in Engineering 10 5 (2002) 441-465
37. Shim M., and Suh M. Crack identification of a planar frame structure based on a synthetic artificial intelligence technique. International Journal for Numerical Methods in Engineering 57 1 (2003) 57-82
38. Shim M., and Suh M. Crack identification using evolutionary algorithms in parallel computing environment. Journal of Sound and Vibration 262 1 (2003) 141-160
39. Dimarogonas A.D. Vibration for Engineers. second ed. (1996), Prentice-Hall, Englewood Cliffs, NJ
40. Sekhar A.S., and Prabhu B.S. Crack detection and vibration characteristics of cracked shafts. Journal of Sound and Vibration 157 2 (1992) 375-381
41. Sekhar A.S., and Prabhu B.S. Transient analysis of a cracked rotor passing through critical speed. Journal of Sound and Vibration 173 3 (1994) 415-421
42. Sekhar A.S., and Prabhu B.S. Vibration and stress fluctuation in cracked shafts. Journal of Sound and Vibration 169 5 (1994) 655-667
43. Kisa M., and Brandon J. The effects of closure of cracks on the dynamics of a cracked cantilever beam. Journal of Sound and Vibration 238 1 (2000) 1-18
44. El-Dannanh E.H., and Farghaly S.H. Natural vibrations of cracked shafts carrying elastically mounted end masses. Journal of Sound and Vibration 170 5 (1994) 607-620
45. Zheng D.Y., and Kessissoglou N.J. Free vibration analysis of a cracked beam by finite element method. Journal of Sound and Vibration 273 3 (2004) 457-475
46. A.C. Chasalevris, C.A. Papadopoulos, Cross coupled bending vibrations of rotating shaft due to a transverse breathing crack, in: Seventh IFToMM Conference on Rotor Dynamics, Vienna, Austria, 2006.
47. Jun O.S., Eun H.J., and Earmme Y.Y. Modelling and vibration analysis of a simple rotor with a breathing crack. Journal of Sound and Vibration 155 2 (1992) 273-290
48. Dimentberg F.M. Flexural Vibrations of Rotating Shafts (1961), Butterworths, London
49. Tondl A. Some Problems in Rotor Dynamics (1965), Chapman & Hall, London
50. Cheng S.M., Swamidas A.S.J., and Wu X.J. Vibrational response of a beam with a breathing crack. Journal of Sound and Vibration 225 1 (1999) 201-208
51. Wauer J. Modelling and formulation of equations of motion for cracked rotating shafts. International Journal of Solids and Structures 26 8 (1990) 901-914
52. Ballo I. Non-linear effects of vibration of a continuous transverse cracked slender shaft. Journal of Sound and Vibration 217 2 (1998) 321-333
53. Davies W.G.R., and Mayes I.W. The vibrational behavior of a multi-shaft, multi-bearing system in the presence of a propagating transverse crack. Journal of Vibration Acoustics Stress and Reliability in Design-Transactions of the ASME 106 1 (1984) 146-153
54. Mayes I.W., and Davies W.G.R. Analysis of the response of a multi-rotor-bearing system containing a transverse crack in a rotor. Journal of Vibration Acoustics Stress and Reliability in Design-Transactions of the ASME 106 1 (1984) 139-145
55. Sinou J., and Lees A.W. A non-linear study of a cracked rotor. European Journal of Mechanics-A: Solids 26 1 (2007) 152-170
56. Sinou J., and Lees A.W. The influence of cracks in rotating shafts. Journal of Sound and Vibration 285 4-5 (2005) 1015-1037
57. Sekhar A.S., and Prabhu B.S. Condition monitoring of cracked rotors through transient response. Mechanism and Machine Theory 33 8 (1998) 1167-1175
58. Pu Y.P., Chen J., and Zou J. Quasi-periodic vibration of cracked rotor on flexible bearings. Journal of Sound and Vibration 251 5 (2002) 875-890
59. Gómez-Mancilla J., Sinou J., and Nosov V.R. The influence of crack-imbalance orientation and orbital evolution for an extended cracked Jeffcott rotor. Comptes Rendus Mecanique 332 12 (2004) 955-962
60. Keiner H., and Gadala M.S. Comparison of different modelling techniques to simulate the vibration of a cracked rotor. Journal of Sound and Vibration 254 5 (2002) 1012-1024
61. Bachschmid N., and Tanzi E. Deflections and strains in cracked shafts due to rotating loads: a numerical and experimental analysis. International Journal of Rotating Machinery 9 4 (2003) 303-311
62. Dentsoras A.J., and Dimarogonas A.D. Fatigue crack propagation in resonating structures. Engineering Fracture Mechanics 34 3 (1989) 721-728
63. Shih Y., and Chen J. Analysis of fatigue crack growth on a cracked shaft. International Journal of Fatigue 19 6 (1997) 477-485
64. Griese F.W., Schone G., and Schutz W. Crack-propagation on torsionally stressed rolling-mill shafts under industrial conditions. Stahl Und Eisen 99 5 (1979) 193-198
65. Gorlov A.M. Propagation of plastic zones around the tip of a crack in a circular torsional shaft. Journal of Applied Mechanics-Transactions of the ASME 46 2 (1979) 458-459
66. Ritchie R.O., McClintock F.A., and Nayeb-Hashemi H. Mode III fatigue crack propagation in low alloy steel. Metallurgical Transactions A: Physical Metallurgy and Materials Science 13A 1 (1982) 101-110
67. Nayeb-Hashemi H., McClintock F.A., and Ritchie R.O. Effects of friction and high torque on fatigue crack propagation in mode III. Metallurgical Transactions. A: Physical Metallurgy and Materials Science 13A 12 (1982) 2197-2204
68. Poon C., Vitale D., and Singh M. Fatigue crack propagation behaviour of rotor and wheel materials used in steam turbines. International Journal of Fatigue 5 2 (1983) 87-93
69. Højfeldt E., and Østervig C.B. Fatigue crack propagation in shafts with shoulder fillets. Engineering Fracture Mechanics 25 4 (1986) 421-427
70. Oehlert A., and Atrens A. The initiation and propagation of stress corrosion cracking in aisi 4340 and 3.5 Ni-Cr-Mo-V rotor steel in constant load tests. Corrosion Science 38 7 (1996) 1159-1169
71. Yang J., Xu P., and Wen B. Character of a flexible rotor with crack propagation. Dongbei Daxue Xuebao/Journal of Northeastern University 22 2 (2001) 203-206
72. Gounaris G.D., Papazoglou V.J., and Anifantis N.K. Dynamics of fractured Timoshenko beams moving in wavy fluids. Computers & Structures 79 4 (2001) 431-439
73. Chandramouli G., Gupta K., and Pandey R.K. Delamination propagation in rotating carbon-epoxy composite shaft. Engineering Fracture Mechanics 49 1 (1994) 121-132
74. D.N. Walker, R.J. Placek, C.E.J. Bowler, Turbine-generator shaft torsional fatigue and monitoring, International Conference on Large High Voltage Electric Systems, 1984.
75. Williams R.A., Adams S.L., and Placek R.J. A methodology for predicting torsional fatigue crack initiation in large turbine-generator shafts. IEEE Transactions on Energy Conversion EC-1 3 (1986) 80-86
76. Huang S.C., Huang Y.M., and Shieh S.M. Vibration and stability of a rotating shaft containing a transverse crack. Journal of Sound and Vibration 162 3 (1993) 387-401
77. Yang B., Suh C.S., and Chan A.K. Characterization and detection of crack-induced rotary instability. Journal of Vibration and Acoustics, Transactions of the ASME 124 1 (2002) 40-48
78. Chen L., and Chen H. Stability analyses of a cracked shaft subjected to the end load. Journal of Sound and Vibration 188 4 (1995) 497-513
79. Chen L., and Peng W. Stability analyses of a timoshenko shaft with dissimilar lateral moments of inertia. Journal of Sound and Vibration 207 1 (1997) 33-46
80. Leng X., Meng G., and Zhang T. Bifurcation and chaos response of a cracked rotor with random disturbance. Journal of Sound and Vibration 299 3 (2007) 621-632
81. Meng G., and Gasch R. Stability and stability degree of a cracked flexible rotor supported on journal bearings. Journal of Vibration and Acoustics 122 2 (2000) 116-125
82. Sekhar A.S., and Balaji Prasad P. Dynamic analysis of a rotor system considering a slant crack in the shaft. Journal of Sound and Vibration 208 3 (1997) 457-473
83. Plaut R.H., Andruet R.H., and Suherman S. Behavior of a cracked rotating shaft during passage through a critical speed. Journal of Sound and Vibration 173 5 (1994) 577-589
84. Chondros T.G., Dimarogonas A.D., and Yao J. A consistent cracked bar vibration theory. Journal of Sound and Vibration 200 3 (1997) 303-313
85. Chondros T.G., Dimarogonas A.D., and Yao J. Longitudinal vibration of a continuous cracked bar. Engineering Fracture Mechanics 61 5-6 (1998) 593-606
86. Chondros T.G., Dimarogonas A.D., and Yao J. Longitudinal vibration of a bar with a breathing crack. Engineering Fracture Mechanics 61 5-6 (1998) 503-518
87. Chondros T.G., Dimarogonas A.D., and Yao J. A continuous cracked beam vibration theory. Journal of Sound and Vibration 215 1 (1998) 17-34
88. Chondros T.G., Dimarogonas A.D., and Yao J. Vibration of a beam with a breathing crack. Journal of Sound and Vibration 239 1 (2001) 57-67
89. Chondros T.G. Variational formulation of a rod under torsional vibration for crack identification. Theoretical and Applied Fracture Mechanics 44 1 (2005) 95-104
90. Chondros T.G., and Labeas G.N. Torsional vibration of a cracked rod by variational formulation and numerical analysis. Journal of Sound and Vibration 301 3-5 (2007) 994-1006
91. Christides S., and Barr A.D.S. One-dimensional theory of cracked bernoulli-euler beams. International Journal of Mechanical Sciences 26 11-12 (1984) 639-648
92. Carneiro S.H.S., and Inman D.J. Continuous model for the transverse vibration of cracked Timoshenko beams. Journal of Vibration and Acoustics 124 2 (2002) 310-320
93. Panteliou S.D., Chondros T.G., and Argyrakis V.C. Damping factor as an indicator of crack severity. Journal of Sound and Vibration 241 2 (2001) 235-245
94. Zhang W., and Testa R.B. Closure effects on fatigue crack detection. Journal of Engineering Mechanics 125 10 (1999) 1125-1132
95. Bachschmid N., Pennacchi P., and Tanzi E. Transverse crack modeling and validation in rotor systems, including thermal effects. International Journal of Rotating Machinery 9 2 (2003) 113-126
96. Bovsunovsky A.P. The mechanisms of energy dissipation in the non-propagating fatigue cracks in metallic materials. Engineering Fracture Mechanics 71 16-17 (2004) 2271-2281
97. Behera R.K., Parhi D.R.K., and Sahu S.K. Vibration analysis of a cracked rotor surrounded by viscous liquid. Journal of Vibration and Control 12 5 (2006) 465-494
98. Parhi D.R., and Behera A.K. Vibration analysis of cantilever type cracked rotor in viscous fluid. Transactions of the Canadian Society for Mechanical Engineering 27 3 (2003) 147-173
99. Parhi D.R., and Behera A.K. Vibrational analysis of cracked rotor in viscous medium. Journal of Vibration and Control 6 3 (2000) 331-349
100. Sabnavis G., Kirk R.G., and Kasarda M. Cracked shaft detection and diagnostics: A literature review. Shock and Vibration Digest 36 4 (2004)
101. Nikolakopoulos P.G., Katsareas D.E., and Papadopoulos C.A. Crack Identification in Structures. In: Papadrakakis M., and Topping B.H.V. (Eds). Computational Structural Engineering for Practice (1994), Civil-Comp Press 1-8
102. Nikolakopoulos P.G., Katsareas D.E., and Papadopoulos C.A. Crack identification in frame structures. Computers and Structures 64 1-4 (1997) 389-406
103. Lee Y., and Chung M. A study on crack detection using eigenfrequency test data. Computers and Structures 77 3 (2000) 327-342
104. Lele S.P., and Maiti S.K. Modelling of transverse vibration of short beams for crack detection and measurement of crack extension. Journal of Sound and Vibration 257 3 (2002) 559-583
105. Ratan S., Baruh H., and Rodriguez J. On-line identification and location of rotor cracks. Journal of Sound and Vibration 194 1 (1996) 67-82
106. Rizos P.F., Aspragathos N., and Dimarogonas A.D. Identification of crack location and magnitude in a cantilever beam from the vibration modes. Journal of Sound and Vibration 138 3 (1990) 381-388
107. Imam I., Azzaro S.H., and Bankert R.J. Development of an on-line rotor crack detection and monitoring system. Journal of Vibration, Acoustics, Stress, and Reliability in Design 111 3 (1989) 241-250
108. Seibold S., and Weinert K. A time domain method for the localization of cracks in rotors. Journal of Sound and Vibration 195 1 (1996) 57-73
109. Dong G.M., Chen J., and Zou J. Parameter identification of a rotor with an open crack. European Journal of Mechanics-A: Solids 23 2 (2004) 325-333
110. Karthikeyan M., Tiwari R., and Talukdar S. Crack localisation and sizing in a beam based on the free and forced response measurements. Mechanical Systems and Signal Processing 21 3 (2007) 1362-1385
111. Gounaris G.D., and Papadopoulos C.A. Analytical and experimental crack identification of beam structures in air or in fluid. Computers and Structures 65 5 (1997) 633-639
112. Ishida Y., Ikeda T., and Yamamoto T. Vibrations of a rotating shaft containing a transverse crack (1st report, variations of a resonance curve due to the angular position of an unbalance at the major critical speed). Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 53 488 (1987) 925-932
113. Kishida M., Sasaki K., and Ishida Y. Elastic stress analysis of a three-dimensional crack using the layer potential (indirect boundary integral method). JSME International Journal, Series 1 31 1 (1988) 32-37
114. Ishida Y., Ikeda T., and Yamamoto T. Vibrations of a rotating shaft containing a transverse crack (variations of a resonance curve due to the angular position of an unbalance at the major critical speed). JSME International Journal, Series III-Vibration Control Engineering for Industry 31 1 (1988) 22-29
115. Ishida Y., and Yamamoto T. Vibrations of a rotating shaft containing a transverse crack. (vibrations at the secondary critical speed). Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 57 538 (1991) 1791-1798
116. Ishida Y., Yamamoto T., and Hirokawa K. Theoretical analysis of a cracked rotor with 4 degrees of freedom (major critical speed of a horizontal rotor). Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 59 566 (1993) 3095-3100
117. Ishida Y., Hirokawa K., and Hirose M. Vibrations of a cracked rotor (3/2-order super-subharmonic and 1/2-order subharmonic oscillations). Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 60 579 (1994) 3689-3696
118. Ishida Y., and Hirokawa K. Internal resonance of a cracked rotor (major critical speed and critical speeds in precritical range). Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 61 586 (1995) 49-57
119. Ishida Y., Hirokawa K., and Hirose M. Vibrations of a cracked rotor: 3/2-order super-subharmonic and 1/2-order subharmonic resonances, American Society of Mechanical Engineers. Design Engineering Division (Publication) DE 84 3 Part A/1 (1995) 605-612
120. Ishida Y., and Hirokawa K. Internal resonances of a cracked rotor-major critical speed and critical speeds in precritical range. JSME International Journal Series C-Dynamics Control Robotics Design and Manufacturing 39 2 (1996) 225-233
121. Ishida Y., and Inoue T. Detection of a rotor crack by a periodic excitation. Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 70 4 (2004) 895-902
122. Y. Ishida, T. Inoue, Detection of a rotor crack based on the nonlinear vibration diagnosis using periodic excitation, in: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference-DETC2005 1B (2005) 1113-1121.
123. Ishida Y., Liu J., and Inoue T. Detection of a rotor crack using nonstationary response (change of maximum amplitude in nonstationary vibration due to the direction of unbalance). Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 72 2 (2006) 316-323
124. Ishida Y., and Inoue T. Detection of a rotor crack using a harmonic excitation and nonlinear vibration analysis. Journal of Vibration and Acoustics, Transactions of the ASME 128 6 (2006) 741-749
125. Tsai T.C., and Wang Y.Z. Vibration analysis and diagnosis of a cracked shaft. Journal of Sound and Vibration 192 3 (1996) 607-620
126. Hwang H.Y., and Kim C. Damage detection in structures using a few frequency response measurements. Journal of Sound and Vibration 270 1-2 (2004) 1-14
127. Saavedra P.N., and Cuitino L.A. Vibration analysis of rotor for crack identification. Journal of Vibration and Control 8 1 (2002) 51-67
128. Saavedra P.N., and Cuitino L.A. Crack detection and vibration behavior of cracked beams. Computers and Structures 79 16 (2001) 1451-1459
129. Plaut R.H., and Wauer J. Parametric external and combination resonances in coupled flexural and torsional oscillations of an unbalanced rotating shaft. Journal of Sound and Vibration 183 5 (1995) 889-897
130. Prabhakar S., Sekhar A.S., and Mohanty A.R. Detection and monitoring of cracks using mechanical impedance of rotor-bearing system. The Journal of the Acoustical Society of America 110 5 (2001) 2351-2359
131. Gounaris G.D., Papadopoulos C.A., and Dimarogonas A.D. Crack identification in beams by coupled response measurements. Computers and Structures 58 2 (1996) 299-305
132. Gounaris G.D., and Papadopoulos C.A. Crack identification in rotating shafts by coupled response measurements. Engineering Fracture Mechanics 69 3 (2002) 339-352
133. Darpe A.K., Chawla A., and Gupta K. Analysis of the response of a cracked Jeffcott rotor to axial excitation. Journal of Sound and Vibration 249 3 (2002) 429-445
134. Darpe A.K., Gupta K., and Chawla A. Experimental investigations of the response of a cracked rotor to periodic axial excitation. Journal of Sound and Vibration 260 2 (2003) 265-286
135. Dado M.H.F., and Abuzeid O. Coupled transverse and axial vibratory behaviour of cracked beam with end mass and rotary inertia. Journal of Sound and Vibration 261 4 (2003) 675-696
136. Al-Said S.M., Naji M., and Al-Shukry A.A. Flexural vibration of rotating cracked Timoshenko beam. Journal of Vibration and Control 12 11 (2006) 1271-1287
137. Isermann R. Model based fault detection and diagnosis methods. Proceedings of the American Control Conference 3 (1995) 1605-1609
138. N. Bachschmid, R. Dellupi, Non linear behaviour of oil film bearings and its relevance in force identification procedures, Paper, American Society of Mechanical Engineers, 1997.
139. Bachschmid N., Pennacchi P., and Tanzi E. Identification of transverse crack position and depth in rotor systems. Meccanica V 35 6 (2000) 563-582
140. Markert R., Platz R., and Seidler M. Model based fault identification in rotor systems by least squares fitting. International Journal of Rotating Machinery 7 5 (2001) 311-321
141. Dharmaraju N., Tiwari R., and Talukdar S. Identification of an open crack model in a beam based on force-response measurements. Computers and Structures 82 2-3 (2004) 167-179
142. Dharmaraju N., Tiwari R., and Talukdar S. Development of a novel hybrid reduction scheme for identification of an open crack model in a beam. Mechanical Systems and Signal Processing 19 3 (2005) 633-657
143. Sekhar A.S. Identification of unbalance and crack acting simultaneously in a rotor system: Modal expansion versus reduced basis dynamic expansion. Journal of Vibration and Control 11 9 (2005) 1125-1145
144. Sekhar A.S. Crack identification in a rotor system: a model-based approach. Journal of Sound and Vibration 270 4-5 (2004) 887-902
145. Pennacchi P., Bachschmid N., and Vania A. A model-based identification method of transverse cracks in rotating shafts suitable for industrial machines. Mechanical Systems and Signal Processing 20 8 (2006) 2112-2147
146. Feldman M., and Seibold S. Damage diagnosis of rotors: application of Hubert transform and multihypothesis testing. Journal of Vibration and Control 5 3 (1999) 421-442
147. Sekhar A.S. On-line rotor fault identification by combined model and signal based approach. Noise and Vibration Worldwide 35 7 (2004) 16-30
148. Dirr B.O., and Schmalhorst B.K. Crack depth analysis of a rotating shaft by vibration measurement. Journal of Vibration Acoustics Stress and Reliability in Design-Transactions of the ASME 110 2 (1988) 158-164
149. Dirr B.O., Popp K., and Rothkegel W.E. Detection and simulation of small transverse cracks in rotating shafts. Archive of Applied Mechanics (Ingenieur Archiv) 64 3 (1994) 206-222