Development of a novel hybrid reduction scheme for identification of an open crack model in a beam

Mechanical Systems and Signal Processing

Volumn 19, Issue 3, 2005, Pages 633-657

  Dharmaraju, N ^a   Tiwari, R ^a   Talukdar, S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; CRACK INITIATION; FRACTURE MECHANICS; LIGHT WEIGHT BUILDING MATERIALS; NUMERICAL ANALYSIS; THEOREM PROVING;

CRACK ELEMENT NODES; FORCE-RESPONSE MEASUREMENTS; HYBRID REDUCTION SCHEME; OPEN CRACK MODEL;

BEAMS AND GIRDERS;

EID: 4544283382     PISSN: 08883270     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ymssp.2004.01.002     Document Type: Article

References (53)

1. Gounaris G.D., Dimarogonas A.D. A finite element of a cracked prismatic beam in Structural analysis. Computers and Structures. 28:1988;309-313.
2. Dimarogonas A.D., Paipetis S.A. Analytical Methods in Rotor Dynamics. 1983;Elsevier Applied Science, London.
3. Papadopoulos C.A., Dimarogonas A.D. Coupling of bending and torsion vibrations of cracked Timoshenko shaft. Ingenier Arch. 57:1987;257-266.
4. Papadopoulos C.A., Dimarogonas A.D. Coupled longitudinal and bending vibration of rotating shaft with an open crack. Journal of Sound and Vibration. 117:1987;81-93.
5. M.D. Rajab, Al-Sabeeh, Vibration characteristics of cracked shafts, Journal of Sound & Vibration 147 (3) (1991) 465-473.
6. Lee C.-W., Yun J.-S., Jun O.S. Modelling of a simple rotor with switching crack and its experimental verifications. Transactions of the ASME. 114:1992;217-225.
7. Huang S.C., Huang Y.M., Shieh S.M. Vibration and stability of a rotating shaft containing a transverse crack. Journal of Sound and Vibration. 162(3):1993;387-401.
8. Gaush R. A survey of the dynamic behaviour of a simple rotating shaft with a transverse crack. Journal of Sound and Vibration. 160(2):1993;313-332.
9. Abraham O.N.L., Brandon J.A., Cohen A.M. Remark on the determination of compliance coefficients at the crack section of a uniform beam with circular cross-section. Journal of Sound and Vibration. 169(4):1994;570-574.
10. Sekhar A.S. Vibration characteristics of a cracked rotor with two open cracks. Journal of Sound and Vibration. 223(4):1999;497-512.
11. Meng G., Gasch R. Stability and stability degree of a cracked flexible rotor supported on journal bearings. Journal of Vibration and Acoustics. 122:2000;117-125.
12. Sukumar N., Moes N., Morn B., Belytschko T. Extended finite element method for three-dimensional crack modelling. International Journal for Numerical Methods in Engineering. 48:2000;1549-1570.
13. Cuitino L.A., Saaverda P.N. Crack detection and vibration behaviour of cracked beams. Computers and Structures. 79:2001;1451-1459.
14. Cawley P., Adams R.D. The locations of defects in structures from measurements of natural frequencies. Journal of Strain Analysis for Engineering Design. 14(2):1979;49-57.
15. Gudmundson P. Eigenfrequency changes of structures due to cracks, notches or other geometrical changes. Journal of Mechanics and Physics of Solids. 30(5):1983;339-353.
16. Ostachowicz W.M., Krawczuk M. Analysis of the effect of cracks on the natural frequencies of a cantiliver beam. Journal of Sound and Vibration. 150(2):1991;191-201.
17. Hu J.L., Liang R.Y. An integrated approach to detection of cracks using vibration of cracks using vibration characteristics. Journal of the Franklin Institute. 330(5):1993;841-853.
18. Doebling S.W., Farrar C.R., Prime M.B. A summary review of vibration based damage identification methods. Shock and Vibration Digest. 30(2):1998;91-105.
19. Salawu O.S. Detection of structural damage through changes in frequencies. a review Engineering Structures. 19(9):1997;718-723.
20. Inagaki T., Kanki H., Shiraki K. Transverse vibrations of a general cracked rotor bearing system. Journal of Mechanical Design. 104:1981;1-11.
21. Nikolakopoulos P.G., Katsareas D.E., Papadopoulos C.A. Crack identification in frame structures. Computers and Structures. 64(1-4):1997;389-406.
22. Rizos P., Aspragathos N., Dimarogonas A.D. Identification of crack location and magnitude in a cantilever beam from the vibration modes. Journal of Sound and Vibration. 138:1990;381-388.
23. Pandey A.K., Biswas M., Samman M.M. Damage detection in bridges from changes in curvature mode shapes. Journal of Sound and Vibrations. 145(2):1991;312-332.
24. Wahab M.M.A., Roeck G.D. Damage identification in bridges using modal curvatures. application to real damage scenario Journal of Sound and Vibration. 226(2):1999;217-235.
25. Liew K.M., Wang Q. Application of wavelet theory for crack identification in structures. Transactions of American Society of Civil Engineering, Journal of Engineering Mechanics. 124(2):1998;152-157.
26. Wauer J. On the dynamics of cracked rotors. a literature survey Applied Mechanics Review. 43(1):1990;13-16.
27. Sekhar A.S., Prabhu B.S. Crack detection and vibration characteristics of cracked shafts. Journal of Sound and Vibration. 157(2):1992;381-387.
28. Dimarogonas A.D. Vibration of cracked structures. a state of the art review Engineering Fracture Mechanics. 55:1996;831-857.
29. Ruotolo R., Surace C. Damage assessment of multiple cracked beams. numerical results and experimental validation Journal of Sound and Vibrations. 206(4):1997;567-588.
30. Lee C.W., Kwon K.S. Crack detection in rotating machinery by modal testing. Institution of Mechanical Engineers. C576/031:2000;535-543.
31. Gelman L., Gorpinich S. Non-linear vibroacoustical free oscillation method for crack detection and evaluation. Mechanical Systems and Signal Processing. 14(3):2000;343-351.
32. Gelman L.M., Kripak D.A., Fedorov V.V., Udovenko L.N. Condition monitoring diagnosis methods of helicopter units. Mechanical Systems and Signal Processing. 14(4):2000;613-624.
33. Chondros T.G., Dimarogonas A.D., Yao J. Vibration of a beam with a breathing crack. Journal of Sound and Vibrations. 239(1):2001;57-67.
34. Leonard F., Lanteigne J., Lalonde S., Turcotte Y. Free-vibration bahaviour of a cracked cantilever beam and crack detection. Society for Experimental Mechanics. 15(1):2001;529-548.
35. He Y., Guo D., Chu F. Using genetic algorithms and finite element methods to detect shaft crack rotor-bearing system. Mathematics and Computers in Simulation. 57:2001;95-108.
36. Vyas N.S., Satishkumar D. Artificial neural network design for fault identification in a rotor-bearing system. Mechanism and Machine Theory. 36:2001;157-175.
37. Gounaris G.D., Papadopoulos C.A. Crack identification in rotating shafts by coupled response measurements. Engineering Fracture Mechanics. 69:2002;339-352.
38. Bach H., Markert R. Determination of the fault position in rotors for the example of a transverse crack. Chang Fu-Kuo Structural Health Monitoring. 1997;325-335 Technomic Publ. Lancaster/Basel.
39. R. Platz, R. Markert, M. Seidler, Validation of online diagnostics of malfunctions in rotor systems, Proceedings of the Seventh International Conference on Vibrations in Rotating Machinery, IMech, UK, 2000, pp. 581-590.
40. R. Markert, R. Platz, M. Seidler, Model based fault identification in rotor systems by least squares fitting, ISROMAC-8 Honolulu, Hawaii, March 2000.
41. A.S. Sekhar, Model-based identification of two cracks in a rotor system, Mechanical Systems and Signal Processing, in press.
42. Dharmaraju N., Tiwari R., Talukdar S. Identification of an open crack model in a beam based on force-response measurements. Computers and Structures. 82(2-3):2003;167-179.
43. Guyan R.J. Reduction of stiffness and mass matrices. AIAA Journal. 3(2):1965;280.
44. Paz M. Dynamic condensation. AIAA Journal. 22(5):1984;724-727.
45. J. O'Callahan, A procedure for an improved reduced system (IRS) model, Seventh International Modal Analysis Conference, Las Vegas, January, 17-21, 1989.
46. M.I. Friswell, S.D. Garvey, J.E.T. Penny, Fifth International Conference on Recent Advances in Structural Dynamics, UK, July 1994, pp. 879-889.
47. J. O'Callahan, P. Avitabile, R. Riemer, System equivalent reduction expansion process, Seventh International Modal Analysis Conference, Las Vegas, January, 29-37, 1989.
48. Kane K., Torby B.J. The extended modal reduction method applied to rotor dynamic problems. Transactions of American Society of Mechanical Engineering, Journal of Vibration and Acoustics. 113(1):1991;79-84.
49. N.M.M. Maia, J.M.M. Silva, J. He, N.A.J. Lieven, R.M. Lin, G.W. Skingle, W.M. To, A.P.V. Urgueira, in: N.M.M. Maia, J.M.M. Silva (Eds.), Theoretical and Experimental Modal Analysis, Research Studies Press Ltd., Wiley, New York, 1997.
50. Ewins D.J. Modal Testing, Theory, Practice and Application. 2000;Research Studies Press Ltd. England.
51. Axial/Lateral Rotational Accelerometers, Make, Kistler (website: www.kistler.com).
52. Ratcliffe M.J., Lieven N.A.J. Measuring rotational degrees of freedom using a laser Doppler vibrometer. Transactions of American Society of Mechanical Engineering, Journal of Vibration and Acoustics. 122(1):2000;12-20.
53. Tada H., Paris P.C., Irwin G.R. The Stress Analysis of Cracks Handbook. 3rd Edition:2000;ASME, New York.