On-line rotor fault identification by combined model and signal based approach

Noise and Vibration Worldwide

Volumn 35, Issue 7, 2004, Pages 16-30

  Sekhar, A S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Fauit; FEW; FFT; Model based approach; Signal based approach; Wavelet

Indexed keywords

COMPUTER SIMULATION; CONDITION MONITORING; CRACKS; FAST FOURIER TRANSFORMS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; NATURAL FREQUENCIES; ULTRASONIC TESTING;

FAULT; MODEL-BASED APPROACH; SIGNAL-BASED APPROACH; WAVELET;

ROTORS;

EID: 3843130597     PISSN: 09574565     EISSN: None     Source Type: Journal    
DOI: 10.1260/0957456041589818     Document Type: Article

References (46)

1. Hamidi, L, Piand, J.B., Pastorel, H., Mansour, W.M, and Massoud, M., "Modal parameters for cracked rotors -Models ans comparisons", J. Sound and Vibrations, 1994, Vol. 175, pp. 265-278.
2. Edwards, S., A.W. Lees, and M.I. Friswell, "Fault Diagnosis of Rotating Machinery", Shock and Vibration Digest, 1998, Vol.30, No. 1.
3. Bach, H., Markert, R., "Determination of the Fault Position in Rotors for the Example of a Transverse Crack", Structural Health Monitoring, Edited by Fu-Kuo Chang, Technomic Publ. Lancaster/Basel, 1997, pp. 325-335.
4. Platz, R., Markert, R. and Seidler, M., "Validation of Online Diagnostics of Malfunctions in Rotor Systems.", Proc. Of the 7th Int. Conf. On Vibrations in Rotating Machinery. IMech., UK, 2000, pp. 581-590.
5. Markert, R., Platz, R. and Seidler, M. "Model Based Fault identification in Rotor Systems by least squares fitting", ISROMAC-8, Honolulu, Hawaii, March 2000.
6. Edwards, S., Lees, A.W. and Friswell, M.I., "Estimating rotor unbalance from a single run-down", Proc. Of the 7th Int. Conf. On Vibrations in Rotating Machinery. IMech., UK, 2000, pp. 323-334.
7. Bachschmid, N., and Pennacchi, P., "Model based malfunction identification from bearing measurements", Proc. Of the 7th Int. Conf. On Vibrations in Rotating Machinery. IMech., UK, 2000, pp. 571-580.
8. Bachschmid, N, and Dellupi, R., "Model-based diagnosis of rotor systems in Power plants - A reserch funded by the European community", Proc. Of the 6th Int. Conf. On Vibrations in Rotating Machinery. IMech., Oxford, Uk, 1996, pp. 50-55.
9. Mayes, I. And Penny, J.E.T., "Model-based diagnostics of Faults rotating machines", Proc. Of the 12th Int. Congress on Condition monitoring and Diagnostic Engineering management, Sunderland, UK, 1998, pp. 431-440.
10. McFadden, P.D. and Smith J.D., "Model for the vibration produced by a single point defect in a rolling element bearing", Journal of Sound and Vibration, 1984, Vol. 96, No. 1, pp. 69-82.
11. McFadden, P.D. and Smith J.D., "The vibration produced by multiple point defects in a rolling element bearing", Journal of Sound and Vibration, 1985, Vol. 98, No. 2, pp. 263-273.
12. Tandon, N and Nakra B.C., "Vibration and Acoustic monitoring techniques for the detection of defects in rolling element bearings - a review", The shock and vibration digest, 1992, Vol. 24, pp. 3-11.
13. Braun and Datner B., "Analysis of roller/ball bearing vibrations", ASME paper 77-WA/DE-5, 1977, pp. 1-8.
14. Chaturvedi, G.K. and Thomas D.W., "Bearing fault detection using Adaptive Noise Cancelling", ASME paper 81-DET-7, 1981, pp. 1-10.
15. Prasad, H., Ghosh, M. and Biswas, S., "Diagnostic monitoring of rolling element bearings by High Frequency Resonance Technique", ASLE paper 84-LC-3c3, 1984, pp. 1-9.
16. Staszewski, W.J., "Structural and mechanical damage detection using wavelets", The Shock and Vibration Digest, 1998, Vol. 30, No. 6, pp. 457-472.
17. Mori, K, Kasashima, N., Yoshioka, T., and Ueno Y., "Prediction of spalling on a ball bearing by applying discrete wavelet transform to vibration signals", Wear, 1996, 195, pp. 162-168.
18. Jing Lin and Liangsheng Qu. "Feature extraction based on morlet wavelet and its application for mechanical fault diagnosis", Journal of Sound and Vibration, 2000, Vol. 234, No. 1, pp. 135-148.
19. Prabhakar, S, Mohanty, A.R., and Sekhar, A.S., "Application of discrete Wavelet Transform for detection of ball bearing race faults", Tribology International, 2002, Vol. 35, pp. 793-800.
20. Nelson, H.D, McVaugh, J.M.," Dynamics of Rotor- bearing systems using Finite elements", ASME J Engineering for Industry, 1976, 98, pp. 593-600.
21. Papadopoulos, C.A. and Dimarogonas, A.D., "Coupled longitudinal and bending vibrations of a rotating shaft with an open crack", Journal Sound and Vibration, 1987, 117, pp. 81-93.
22. Sekhar, A.S.. and Prabhu B.S., "Transient analysis of a cracked rotor passing through the critical speed", Journal Sound and Vibration, 1994, 173, pp. 415-421.
23. Arumugam, P, Swarnamai, S., and Prabhu,B.S, "Effects of coupling misalignment on the vibration characteristics of a two stage turbine rotor", ASME Design Engg. Technical Conferences, 1995, 84, pp. 1049-1054.
24. Sekhar, A.S., and Prabhu, B.S., "Effects of coupling misalignment on vibrations of rotating machinery", Journal Sound and Vibration, 1995, Vol. 185, pp. 655-671.
25. Prabhakar, S., Sekhar A.S. and Mohanty, A.R., "Vibration Analysis of a Misaligned Rotor-coupling-bearing system passing through the critical speed", Journal of Mechanical Engg. Science, I. Mech, Part C, 2001, Vol. 215, pp. 1417-1428.
26. Prabhakar, S., Sekhar, A.S., and Mohanty, A.R. "Crack versus Coupling Misalignment in a transient Rotor system", Journal of Sound and Vibration, 2002, Vol. 256, No. 4, pp. 773-786.
27. Gibbons, C.B., "Coupling misalignment forces", Proc. Of the 5th Turbomachinery Symposium, Gas turbine laboratories, Texas A&M University, 1976, pp. 111-116.
28. Kramer E., "Dynamics of rotors and foundations", Springer-Verlag, Berlin, 1993, pp. 224-226.
29. Balmes, E., "Review and Evaluation of Shape Expansion Methods", IMAC, 2000, pp. 555-561.
30. Goodwin, M.J., "Dynamics of Rotor-bearing systems", Unwin Hyman, London, 1989.
31. Dewell, D.L and Mitchell, L.D, "Detection of a Misaligned disk coupling using spectrum analysis", Trans. ASME J. of Vibration, Acoustics, Stress and Reliability in Design, 1984, Vol. 106, pp. 9-16.
32. Imam. I., Azzaro, S. H. and Bankarst, R. J., "Development of online rotor crack detection and monitoring system", Trans. ASME, Journal of "Vibration, Acoustics, Stress, and Reliability in Design, 1989, Vol. 111, pp. 241-250.
33. Wauer, J.," Dynamics of cracked rotors : Literature Survey", Applied Mechanics Reviews, 1990, Vol. 43, pp 13-17.
34. Newland, D.E. "Wavelet analysis of vibration, part I: theory", ASME Journal of Vibration and Acoustics, 1994, Vol. 116, No. 4, pp. 409-416.
35. Newland, D.E. " Wavelet analysis of vibration, part II: Wavelet maps", ASME Journal of Vibration and Acoustics, 1994, Vol. 116, No. 4, pp. 417-425.
36. Prabhakar,S, Sekhar A.S,and A.R. Mohanty, "Detection and Monitoring of cracks in a Rotor-bearing system using Wavelet Transforms", Journal of the Mechanical Systems and Signal Processing, 2001, Vol. 15, No. 2, pp. 447-450.
37. Daubechies, I., Ten lectures on wavelets, CBMS, SIAM, 1994, Vol. 61, pp. 76
38. Bucher, I., and Seibold, S., "A two-stage approach for enhanced diagnosis of rotating machines", Proc. of the 5th Int. conf. on rotor dynamics, Darmstadt, Germany: 338-349, Sept. 1998.
39. Feldman M, and Seibold, S., "Damage Daignosis of Rotors: Application of Hilbert Transform and Multihypothesis Testing", Journal of Vibration and Control, 199, 5, pp. 421-442.
40. Prabhakar, S., Sekhar, A.S., and Mohanty, A.R., "Detection and Monitoring of cracks using Mechanical Impedance of Rotor-bearing system", Journal of the Acoustical Society of America, 2001, Vol. 110, No. 5, pp. 2351-2359.
41. Prabhakar, S., Mohanty, A.R., and Sekhar, A.S., "Crack detection by measurement of mechanical Impedance of a rotor-bearing system", Journal of the Acoustical Society of America, 2002, Vol. 112, No. 6, pp. 2825-2830.
42. Sekhar, A.S., "Crack identification in a rotor system-a model based approach", Journal of Sound and Vibration, 2004, Vol. 270, No. 4, pp. 887-902.
43. Sekhar, A.S., "Identification of crack in a rotor system using a model-based wavelet approach", Int. Journal of Structural Health Monitoring, 2003, Vol. 2, No. 4, pp. 293-308.
44. Sekhar, A.S., "Model based Identification of two cracks in a rotor system", Journal of Mechanical Systems and Signal Processing, 2004, Vol. 18, No. 4, pp. 977-983.
45. Sekhar, A.S., "Identification of unbalance and crack acting simultaneously in a rotor system: Modal expansion Versus Reduced Based Dynamic expansion", Journal of Vibration and Control, 2003 (accepted and in press).
46. Sekhar, A.S., "Identification of coupling misalignment in a rotor-coupling-bearing system", Proceedings of 4th International Workshop on Structural Health Monitoring (SHM 2003), Standford, USA, Sept. 15-17, 2003, pp. 1374-1383.