Progress in synthesis of ferroelectric ceramic materials via high-energy mechanochemical technique

Progress in Materials Science

Volumn 53, Issue 2, 2008, Pages 207-322

  Kong, L B ^a   Zhang, T S ^b   Ma, J ^b   Boey, F ^b  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

ANTIFERROELECTRIC MATERIALS; CAPACITORS; ELECTRONIC EQUIPMENT; PERMITTIVITY; SYNTHESIS (CHEMICAL); ULTRASONIC TRANSDUCERS;

ELECTRONIC MATERIALS; HIGH-ENERGY MECHANOCHEMICAL; MEDICAL DIAGNOSTIC TRANSDUCERS; PIEZOELECTRIC SONAR;

FERROELECTRIC CERAMICS;

EID: 39149140436     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2007.05.001     Document Type: Review

References (262)

1. Haertling G.H. Ferroelectric ceramics: history and technology. J Am Ceram Soc 82 4 (1999) 797-818
2. Damjanovic D. Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics. Rep Prog Phys 61 (1998) 1267-1324
3. 3. Mater Res Bull 8 (1973) 533-544
4. Yamamoto T. Optimum preparation methods for piezoelectric ceramics and their evaluation. Am Ceram Soc Bull 71 6 (1992) 978-985
5. Arlt G. The influence of microstructure on the properties of ferroelectric ceramics. Ferroelectrics 104 (1990) 217-227
6. Czyrska-Filemonowicz A., and Dubiel B. Mechanically alloyed, ferritic oxide dispersion strengthened alloys: structure and properties. J Mater Process Tech 64 1-3 (1997) 53-64
7. Grahle P., and Arzt E. Microstructural development in dispersion strengthened NiAl produced by mechanical alloying and secondary recrystallization. Acta Mater 45 (1997) 201-211
8. Welham N.J., Willis P.E., and Kerr T. Mechanochemical formation of metal-ceramic composites. J Am Ceram Soc 83 1 (2000) 33-40
9. Muñoz-Morris M.A., Oca C.G., and Morris D.G. Microstructure and room temperature strength of Fe-40Al containing nanocrystalline oxide particles. Acta Mater 51 (2003) 5187-5197
10. Ryu H.J., and Hong S.H. Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys. Mater Sci Eng A 363 (2003) 179-184
11. Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci 46 (2001) 1-184
12. Weeber A.W., and Bakker H. Amorphization by ball milling: a review. Phys B 153 (1988) 93-135
13. Zhang D.L. Processing of advanced materials using high-energy mechanical milling. Prog Mater Sci 49 (2004) 537-560
14. Harris J.R., Wattis J.A.D., and Wood J.V. A comparison of different modes for mechanical alloying. Acta Mater 49 (2001) 3991-4003
15. Froes F.H., Senkov O.N., and Baburaj E.G. Synthesis of nanocrystalline materials - an overview. Mater Sci Eng A 301 (2001) 44-53
16. Koch C.C. Intermetallic matrix composites prepared by mechanical alloying - a review. Mater Sci Eng A 244 (1998) 39-48
17. Hong L.B., and Fultz B. Two-phase coexistence in Fe-Ni alloys synthesized by ball milling. J Appl Phys 79 8 (1996) 3946-3955
18. Suryanarayana C., Ivanov E., and Boldyrev V.V. The science and technology of mechanical alloying. Mater Sci Eng A 304-306 (2001) 151-158
19. Jiang J.Z., Poulsen F.W., and Mørup S. Structure and thermal stability of nanostructured iron-doped zirconia prepared by high-energy ball milling. J Mater Res 14 (1999) 1343-1352
20. 2 solid solution via a high-energy ball milling process. J Alloy Comp 335 1-2 (2002) 290-296
21. Janot R., and Guérard D. One-step synthesis of maghemite nanometric powders by ball-milling. J Alloy Comp 333 (2002) 302-307
22. 3 powder in air atmosphere. Mater Sci Eng A 245 (1998) 109-117
23. 7-δ nanocrystalline powders. J Mater Res 9 (1994) 535-540
24. 9 fine particles prepared by mechanical alloying. J Magn Magn Mater 182 (1998) 231-237
25. 19. J Magn Magn Mater 219 (2000) 206-212
26. Fatemi D.J., Harris V.G., Browning V.M., and Kirkland J.P. Processing and cation redistribution of MnZn ferrites via high-energy ball milling. J Appl Phys 83 (1998) 6767-6769
27. Shirane G., and Hoshino S. On the phase transition in lead titanate. J Phys Soc Jpn 6 (1951) 265-270
28. 3 ceramics. J Appl Phys 52 10 (1981) 6147-6150
29. 3 ceramics. J Eur Ceram Soc 24 (2004) 1993-1998
30. 3 system ceramics for power supply. Sensors Actuators 78 (1999) 168-171
31. 3 piezoelectric ceramics by XRD profile-fitting technique. J Mater Sci 29 (1994) 1045-1050
32. 3 ceramics containing La and Mn. J Acoust Soc Am 50 (1971) 1060-1066
33. Kim S., Jun M., and Hwang S. Preparation of undoped lead titanate ceramics via sol-gel processing. J Am Ceram Soc 82 2 (1999) 289-296
34. Tartaj J., Moure C., Lascano L., and Durán P. Sintering of dense ceramics bodies of pure lead titanate obtained by seeding-assisted chemical sol-gel. Mater Res Bull 36 (2001) 2301-2310
35. Udomporn A., Pengpat K., and Ananta S. Highly dense lead titanate ceramics form refined processing. J Eur Ceram Soc 24 (2004) 185-188
36. Takeuchi T., Takahashi M., Ado K., Tamari N., Ichikawa K., Miyamoto S., et al. Rapid preparation of lead titanate sputtering target using spark-plasma sintering. J Am Ceram Soc 84 11 (2001) 2521-2525
37. Takeuchi T., Tabuchi M., Kondoh I., Tamari N., and Kegeyama H. Synthesis of dense lead titanate ceramics with submicrometer grains by spark plasma sintering. J Am Ceram Soc 83 3 (2000) 541-544
38. Aning A.O., Hong C., and Desu S.B. Novel synthesis of lead titanate by mechanical alloying. Mater Sci Forum 179-181 (1995) 207-214
39. Xue J.M., Wan D.M., and Wang J. Mechanochemical synthesis of nanosized lead titanate powders form mixed oxides. Mater Lett 39 (1999) 364-369
40. 3 powders form an amorphous Pb-Ti-O precursor by mechanical activation. Mater Chem Phys 75 (2002) 216-219
41. 3 powders by high-energy ball milling. Ferroelectrics 230 (1999) 281-286
42. 3 ceramics derived from high-energy ball milled nano-sized powders. J Mater Sci Lett 19 (2000) 1963-1966
43. Komatsubara S., Isobe T., and Senna M. Effect of preliminary mechanical treatment on the microhomogenization during heating of hydrous gels as precursors for lead titanate. J Am Ceram Soc 77 1 (1994) 278-282
44. 3 ceramics by using a novel grinding equipment. J Mater Sci 31 (1996) 1725-1728
45. 2. J Alloy Comp 279 2 (1998) L1-L3
46. 3 processed by high-energy mechanical milling. Appl Phys Lett 78 15 (2001) 2148-2150
47. Kong LB et al. Unpublished work.
48. Löbmann P., Glaubitt W., and Fricke J. Densification and crystallization of lead titnate aerogels. J Am Ceram Soc 80 10 (1997) 2658-2666
49. 3. J Mater Sci 20 (1985) 4479-4483
50. 3 powder with a simple mode of size distribution. J Mater Sci 29 (1994) 5657-5663
51. Moon J., Li T., Randall C.A., and Adair J.H. Low temperature synthesis of lead titanate by a hydrothermal method. J Mater Res 12 1 (1997) 189-197
52. 3 powders. J Am Ceram Soc 82 7 (1999) 1702-1710
53. Shrout T.R., Papet P., Kim S., and Lee G.S. Conventionally prepared submicrometer lead-based perovskite powders by reactive calcinations. J Am Ceram Soc 73 7 (1990) 1862-1867
54. Randall C.A., Kim N., Kucera J.P., Cao W., and Shrout T.R. Intrinsic and extrinsic size effects in fine-grained morphotropic-phase-boundary lead zirconate titanate ceramics. J Am Ceram Soc 81 3 (1998) 677-688
55. 2 system. J Am Ceram Soc 83 4 (2000) 873-881
56. Wu A., Vilarinho P.M., Miranda Salvado I.M., and Baptista J.L. Sol-gel preparation of lead zirconate titanate powders and ceramics: effect of alkoxide stabilizers and lead precursors. J Am Ceram Soc 83 6 (2000) 1379-1385
57. 3 by sol-gel coating of PbO. J Mater Sci 30 (1995) 3231-3237
58. Zimmermann-Chopin R., and Auer S. Spray drying of sol-gel precursors for the manufacturing of PZT powders. J Sol-Gel Sci Technol 3 (1994) 101-107
59. Camargo E.R., Frantti J., and Kakihana M. Low-temperature chemical synthesis of lead zirconate titanate (PZT) powders free from halides and organics. J Mater Chem 11 (2001) 1875-1879
60. 3 (x = 0.45-0.65) powders without using alkaline mineralizer. J Mater Sci Lett 17 (1998) 53-56
61. Arendt R.H., Rosolowski J.H., and Szymaszek J.W. Lead zirconate titanate ceramics from molten salt solvent synthesized powders. Mater Res Bull 14 5 (1979) 703-709
62. Xue J.M., Wan D.M., Lee S.E., and Wang J. Mechanochemical synthesis of lead zirconate titanate form mixed oxides. J Am Ceram Soc 82 7 (1999) 1687-1692
63. Lee S.E., Xue J.M., Wan D.M., and Wang J. Effects of mechanical activation on the sintering and dielectric properties of oxide-derived PZT. Acta Mater 47 9 (1999) 2633-2639
64. 3 ceramics from high-energy ball milling powders. Mater Lett 42 (2000) 232-239
65. 3 ceramics via reactive sintering of partially reacted mixture produced by a high-energy ball milling process. J Mater Res 16 6 (2001) 1636-1643
66. Kong L.B., Ma J., Huang H.T., Zhu W., and Tan O.K. Lead zirconate titanate ceramics derived from oxide mixture treated by a high-energy ball milling process. Mater Lett 50 (2001) 129-133
67. Kong L.B., Ma J., Zhu W., and Tan O.K. Reaction sintering of partially reacted system for PZT ceramics via a high-energy ball milling. Scr Mater 44 (2001) 345-350
68. Branković Z., Branković G., Jovalekić C., Maniette Y., Cilense M., and Varela J.A. Mechanochemical synthesis of PZT powders. Mater Sci Eng A 345 (2003) 243-248
69. 3 nanoceramic synthesized by high-energy ball milling. J Appl Phys 94 9 (2003) 6091-6096
70. Xue J.M., Wang J., and Toh W. Synthesis of lead zirconate titanate form an amorphous precursor by mechanical activation. J Alloy Comp 308 (2000) 139-146
71. 3 ceramics. J Am Ceram Soc 81 4 (1998) 1013-1018
72. Li J.F., Wang S., Wakabayashi K., Esashi M., and Watanabe R. Properties of modified lead zirconate titanate ceramics prepared at low temperature (800 °C) by hot isostatic pressing. J Am Ceram Soc 83 4 (2000) 955-957
73. Wittmer D.E., and Buchanan R.C. Low-temperature densification of lead zirconate-titanate with vanadium pentoxide additive. J Am Ceram Soc 64 8 (1981) 485-490
74. Li L., Zhang X., and Chai J. Low temperature sintering of PZT ceramics. Ferroelectrics 101 (1990) 101-108
75. Cheng S.Y., Fu S.L., Wei C.C., and Ke G.M. The properties of low-temperature fired piezoelectric ceramics. J Mater Sci 21 (1986) 572-576
76. Vaidhyanathan B., Singh A.P., Agrawal D.K., Shrout T.R., Roy R., and Ganguly S. Microwave effects in lead zirconium titanate synthesis: enhanced kinetics and changed mechanisms. J Am Ceram Soc 84 6 (2001) 1197-1202
77. Jiang Q.Y., Subbarao E.C., and Cross L.E. Effect of composition and temperature on electric fatigue of La-doped lead zirconate titanate ceramics. J Appl Phys 75 11 (1994) 7433-7443
78. Brown L.M., and Mazdiyasni K.S. Cold-pressing and low-temperature sintering of alkoxy-derived PLZT. J Am Ceram Soc 55 11 (1972) 541-544
79. Yao X., Chen Z., and Cross L.E. Polarization and depolarization behavior of hot pressed lead lanthanum zirconate titanate ceramics. J Appl Phys 54 6 (1983) 3399-3403
80. Viehland D., Jang S.J., Cross L.E., and Wuttig M. Internal strain relaxation and the glassy behavior of La-modified lead zirconate titanate relaxors. J Appl Phys 69 9 (1991) 6595-6602
81. Viehland D., Dai X.H., Li J.F., and Xu Z. Effects of quenched disorder on La-modified lead zirconate titanate: long- and short-range ordered structurally incommensurate phases, and glassy polar clusters. J Appl Phys 84 1 (1998) 458-471
82. Hammer M., and Hoffmann M.J. Sintering model for mixed-oxide-derived lead zirconate titanate ceramics. J Am Ceram Soc 81 12 (1998) 3277-3284
83. Brodeur R.P., Gachigi K.W., Pruna P.M., and Shrout T.R. Ultra-high strain ceramics with multiple field-induced phase transitions. J Am Ceram Soc 77 11 (1994) 3042-3044
84. Yoshikawa Y., and Tsuzuki K. Fabrication of transparent lead lanthanum zirconate titanate ceramics from fine powders by two-stage sintering. J Am Ceram Soc 75 9 (1992) 2520-2528
85. Cerqueira M., Nasar R.S., Leite E.R., Longo E., and Varela J.A. Synthesis and characterization of PLZT(9/65/35) by the Pechini method and partial oxalate. Mater Lett 35 (1998) 166-171
86. Akbas M.A., and Lee W.E. Synthesis and sintering of PLZT powder made by freeze/alcohol drying or gelation of citrate solutions. J Eur Ceram Soc 15 (1995) 57-63
87. Haertling G.H., and Land C.E. Recent improvements in the optical and electrooptic properties of PLZT ceramics. Ferroelectrics 3 (1972) 269-280
88. Snow G.S. Improvements in atmosphere sintering of transparent PLZT ceramics. J Am Ceram Soc 56 9 (1973) 479-480
89. James A.D., and Messer R.M. The preparation of transparent PLZT ceramics from oxide powders by liquid-phase sintering. Trans J Br Ceram Soc 77 (1972) 152-158
90. Lin W.K., and Chang Y.H. Behavior of PbO in the two-stage sintering of PLZT ceramics. Mater Sci Eng A 186 (1994) 177-183
91. Choi J.J., Ryu J., and Kim H.E. Microstructural evolution of transparent PLZT ceramics sintered in air and oxygen atmospheres. J Am Ceram Soc 84 7 (2001) 1465-1469
92. 3) ceramics by a three-stage-atmosphere-sintering technique. J Am Ceram Soc 85 2 (2002) 473-475
93. 3 ceramics. J Am Ceram Soc 82 6 (1999) 1447-1450
94. Kong L.B., Ma J., Zhu W., and Tan O.K. Preparation and characterization of PLZT ceramics using high-energy ball milling. J Alloys Comp 322 (2001) 290-297
95. Kong L.B., Ma J., Zhu W., and Tan K.O. Preparation and characterization of PLZT(8/65/35) ceramics via reaction sintering from ball milled powders. Mater Lett 52 (2002) 378-387
96. Kong L.B., Ma J., Zhu W., and Tan O.K. Transparent PLZT8/65/35 ceramics from constituent oxides mechanically modified by high-energy ball milling. J Mater Sci Lett 21 (2002) 197-199
97. Kong L.B., Ma J., Zhu W., and Tan O.K. Preparation and characterization of translucent PLZT8/65/35 ceramics from nano-sized powders produced by a high-energy ball-milling process. Mater Res Bull 36 (2001) 1675-1685
98. Chen I.W., and Wang X.H. Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 404 (2000) 168-171
99. Kong L.B., Ma J., Huang H., and Zhang R.F. Effect of excess PbO on microstructure and electrical properties of PLZT7/60/40 ceramics derived from a high-energy ball milling process. J Alloys Comp 345 (2002) 238-245
100. Jaffe B., Cook W.R., and Jaffe H. Piezoelectric ceramics (1971), Academic Press, London
101. Li J.F., Viehland D., Tani T., Lakeman C.D.E., and Payne D.A. Piezoelectric properties of sol-gel-derived ferroelectric and antiferroelectric thin layers. J Appl Phys 75 1 (1994) 442-448
102. Tani T., Li J.F., Viehland D., and Payne D.A. Antiferroelectric-ferroelectric switching and induced strains for sol-gel derived lead zirconate thin layers. J Appl Phys 75 6 (1994) 3017-3023
103. 3 ceramics. J Appl Phys 86 6 (1999) 3327-3332
104. Cross L.E. Antiferroelectric-ferroelectric switching in simple 'kittle' antiferroelectrics. J Phys Soc Jpn 23 (1967) 77-82
105. Xu B., Moses P., Pai N.G., and Cross L.E. Charge release of lanthanum-doped lead zirconate titanate antiferroelectric thin films. Appl Phys Lett 72 5 (1998) 593-595
106. Berlincourt D., Krueger H.H.A., and Jaffe B. Stability of phases in modified lead zirconate with variation in pressure, electric field. temperature and composition. J Phys Chem Solids 25 (1964) 659-674
107. 3. J Appl Phys 71 3 (1992) 1361-1367
108. Markowski K., Park S.E., Yoshikawa S., and Cross L.E. Effect of compositional variation in the lead lanthanum zircornate stannate titanate system on electrical properties. J Am Ceram Soc 79 12 (1996) 3297-3304
109. Oren E.E., Taspinar E., and Tas A.C. Preparation of lead zirconate by homogeneous precipitation and calcinations. J Am Ceram Soc 80 10 (1997) 2714-2716
110. Rao Y.S., and Sunandana C.S. Low-temperature synthesis of lead zirconate. J Mater Sci Lett 11 (1992) 595-597
111. Ibrahim D.M., and Hennicke H.W. Preparation of lead zirconate by a sol-gel method. Trans J Br Ceram Soc 80 (1981) 18-22
112. Kong L.B., Ma J., Zhu W., and Tan O.K. Preparation and characterization of lead zirconate ceramics from high-energy ball milled powder. Mater Lett 49 (2001) 96-101
113. Xu Z., Viehland D., and Payne D.A. An incommensurate-commensurate phase transformation in antiferroelectric tin-modified lead zirconate titanate. J Mater Res 10 2 (1995) 453-460
114. Kong L.B., Ma J., Zhang T.S., Zhu W., and Tan O.K. Preparation of antiferroelectric lead zirconate titanate stannate ceramics by high-energy ball milling process. J Mater Sci Mater Electron 13 (2002) 89-94
115. Cross L.E. Relaxor ferroelectrics. Ferroelectrics 76 (1987) 241-267
116. Cross L.E., Jang S.J., and Newnham R.E. Large electrostrictive effects in relaxor ferroelectrics. Ferroelectrics 23 (1980) 187-192
117. Shrout T.R., and Halliyal A. Preparation of lead-based ferroelectric relaxors for capacitors. Am Ceram Soc Bull 6 (1987) 704-711
118. Swartz S.L., Shrout T.R., Schulze W.A., and Cross L.E. Dielectric properties of lead magnesium niobate ceramics. J Am Ceram Soc 67 (1984) 311-315
119. Chaput F., Boilot J.P., Lejeune M., Papiernik R., and Hubert-Pfalzgraf L.G. Low-temperature route to lead magnesium niobate. J Am Ceram Soc 72 8 (1989) 1355-1357
120. 3 (PMN) powder synthesized from metal-citrate gel by thermal shock method. Mater Res Bull 25 3 (1990) 283-291
121. Narenda Y., and Messing G.L. Kinetic analysis of combustion synthesis of lead magnesium niobate from metal carboxylate gels. J Am Ceram Soc 80 4 (1997) 915-924
122. Han K.R., Koo H.J., and Lim C.S. Novel route to lead based ferroelectric compounds via tetragonal lead oxide intermediates. J Am Ceram Soc 83 9 (2000) 2214-2218
123. Wang J., Xue J.M., Wan D.M., and Ng W. Mechanochemically synthesized lead magnesium niobate. J Am Ceram Soc 82 5 (1999) 1358-1360
124. Wang J., Xue J.M., Wan D.M., and Ng W. Mechanochemical fabrication of single phase PMN of perovskite structure. Solid State Ionics 124 (1999) 271-279
125. 3 in excess lead oxide by mechanical activation. J Am Ceram Soc 84 3 (2001) 660-662
126. Xue J.M., Wang J., Ng W., and Wang D. Activation-induced pyrochlore-to-perovskite conversion for a lead magnesium niobate precursor. J Am Ceram Soc 82 8 (1999) 2282-2284
127. Wang J., Xue J.M., Wan D.M., and Gan B.K. Mechanically activating nucleation and growth of complex perovskites. J Solid State Chem 154 (2000) 321-328
128. Xue J.M., Wan D.M., and Wang J. Functional ceramics of nanocrystallinity by mechanical activation. Solid State Ionics 151 (2002) 403-412
129. Kong L.B., Ma J., Zhu W., and Tan O.K. Preparation of PMN powders and ceramics via a high-energy ball milling process. J Mater Sci Lett 20 (2001) 1241-1243
130. Kong L.B., Ma J., Zhu W., and Tan O.K. Translucent PMN and PMN-PT ceramics from high-energy ball milling derived powders. Mater Res Bull 37 (2002) 23-32
131. 3 powders from mixed oxides. J Am Ceram Soc 82 2 (1999) 477-479
132. Wang J., Xue J.M., and Wan D.M. How different is mechanical activation from thermal activation? A case study with PZN and PZN-based relaxors. Solid State Ionics 127 (2000) 169-175
133. 3 by calcining of mixed oxide (CMO). Eur J Solid State Inorg Chem 35 (1998) 221-230
134. 3. J Am Ceram Soc 74 1 (1991) 38-41
135. 3 solid solutions. Appl Phys Lett 83 26 (2003) 5509-5511
136. Zhou L., Vilarinho P.M., and Baptista J.L. Synthesis and characterization of lead iron tungstate ceramics obtained by two preparation methods. Mater Res Bull 29 11 (1994) 1193-1201
137. Lu C.H., Shinozaki K., and Mitzutani N. Formation process and microstructural evolution of sol-gel-derived lead iron tungstate ceramics. J Am Ceram Soc 75 (1992) 1003-1006
138. 3 by mechanical activation. J Am Ceram Soc 85 3 (2002) 565-572
139. 3. J Am Ceram Soc 83 7 (2000) 1575-1580
140. 3 via mechanical activation of mixed oxides. Solid State Ionics 132 (2000) 55-61
141. 3. J Alloys Comp 343 (2002) 156-163
142. 3. J Appl Phys 77 4 (1995) 1671-1676
143. 3 ceramics. J Appl Phys 83 11 (1998) 5702-5708
144. Lim J., Xue J.M., and Wang J. Ferroelectric lead scandium tantalate from mechanical activation of mixed oxides. Mater Chem Phys 75 (2002) 157-160
145. 3 ceramics. J Am Ceram Soc 80 4 (1997) 957-964
146. 3 ceramics. J Eur Ceram Soc 23 (2003) 133-139
147. Suh D.H., Lee K.H., and Kim N.K. Phase development and dielectric/ferroelectric responses in the PMN-PT system. J Eur Ceram Soc 22 (2002) 219-223
148. 3 from mixed oxides. Adv Mater 11 3 (1999) 210-213
149. 3 ceramics via a soft mechanochemical route. J Am Ceram Soc 80 4 (1997) 9739-9781
150. Kong L.B., Ma J., Zhu W., and Tan O.K. Rapid formation of lead magnesium niobate-based ferroelectric ceramics via a high-energy ball milling process. Mater Res Bull 37 (2002) 459-465
151. Algueró M., Alemany C., Jiménez B., Holc J., Kosec M., and Pardo L. Piezoelectric PMN-PT ceramics from mechanochemically activated precursors. J Eur Ceram Soc 24 (2004) 937-940
152. 3 system. Ferroelectrics 37 (1981) 579-582
153. 3 system. Am Ceram Soc Bull 66 (1987) 671-676
154. 3. Am Ceram Soc Bull 66 (1987) 664-667
155. 3 ferroelectric single crystal. J Appl Phys 89 9 (2001) 5100-5106
156. Kong L.B., Ma J., Huang H., and Zhang R.F. (1 - x)PZN-xBT ceramics derived from mechanochemically synthesized powders. Mater Res Bull 37 (2002) 1085-1092
157. Kong L.B., Ma J., Huang H., and Zhang R.F. Lead zinc niobate (PZN)-barium titanate (BT) ceramics from mechanochemically synthesized powders. Mater Res Bull 37 (2002) 2491-2498
158. Tan Y.L., Xue J.M., and Wang J. Stabilization of perovskite phase and dielectric properties of 0.95PZN-0.05BT derived from mechanical activation. J Alloys Comp 297 (2000) 92-98
159. Xue J.M., Tan Y.L., Wan D.M., and Wang J. Synthesizing 0.9PZN-0.1BT by mechanically activating mixed oxides. Solid State Ionics 120 (1999) 183-188
160. 3 prepared by aqueous solution-gel chemistry. J Mater Chem 11 (2001) 1192-1197
161. 3 up to x = 0.7 from a single mixture via a soft-mechanochemical route. J Am Ceram Soc 83 12 (2000) 3208-3210
162. Ang S.K., Wang J., and Xue J.M. Phase stability and dielectric properties of (1 - x)PFW + xPZN derived from mechanical activation. Solid State Ionics 127 (2000) 285-293
163. 3 ceramics. J Am Ceram Soc 73 1 (1990) 106-114
164. 3 ceramics prepared by excess constituent oxides. J Mater Res 9 10 (1994) 2634-2644
165. Escure P., Lattard E., Lejeune M., and Baumard J.F. Stability of the perovskite phase in PZN-PMN-PT ceramics. J Mater Sci 31 (1996) 3937-3943
166. 3 by mechanically activating mixed oxides. Acta Mater 47 7 (1999) 2283-2291
167. Wan D.M., Xue J.M., and Wang J. Nanocrystalline 0.54PZN-0.36PMN-0.1PT of perovskite structure by mechanical activation. Mater Sci Eng A 286 (2000) 96-100
168. 3. J Am Ceram Soc 83 1 (2000) 53-59
169. Ang S.K., Wang J., and Xue J.M. Mechanical activation and dielectric properties of 0.48PFN-0.36PFW-0.16PZN from mixed oxides. J Alloys Comp 311 (2000) 181-187
170. 3 by mechanical activation. Appl Phys Lett 82 26 (2003) 4773-4775
171. 3 triggered by mechanical activation. J Mater Sci 39 (2004) 5267-5270
172. 3. Mater Chem Phys 75 (2002) 211-215
173. 3 triggered by mechanical activation. J Am Ceram Soc 85 4 (2002) 833-838
174. Alrt G., Hennings D., and de With G. Dielectric properties of fine-grained barium titanate ceramics. J Appl Phys 58 4 (1985) 1619-1625
175. 3. Ferroelectrics 74 (1987) 61-75
176. 3 powder-effect of particle interactions on the suspension properties, consolidation, and sintering behavior. J Am Ceram Soc 80 2 (1997) 291-300
177. 3 fine powder: precursors, polymorphism and properties. J Mater Chem 9 (1999) 83-91
178. Brzozowski E., and Castro M.S. Synthesis of barium titanate improved by modifications in the kinetics of the solid state reaction. J Eur Ceram Soc 20 (2000) 2347-2351
179. 3 powders by modification in the processing conditions. Thermochim Acta 389 (2003) 123-129
180. Xue J.M., Wang J., and Wang D.M. Nanosized barium titanate powder by mechanical activation. J Am Ceram Soc 83 1 (2000) 232-234
181. 3 powder. Mater Sci Forum 225 (1996) 563-568
182. Kong L.B., Ma J., Huang H., Zhang R.F., and Que W.X. Barium titanate derived from mechanochemically activated powders. J Alloys Comp 337 (2002) 226-230
183. 2 (rutile) mixtures. Thermochim Acta 374 (2001) 151-158
184. 15 dielectric ceramics. J Eur Ceram Soc 21 (2001) 1689-1692
185. 12. Ferroelectrics 3 (1971) 17-27
186. 12 single crystals. J Appl Phys 39 5 (1968) 2268-2274
187. Shulman H.S., Testorf M., Damjanovic D., and Setter N. Microstructure, electrical conductivity and piezoelectric properties of bismuth titanate. J Am Ceram Soc 79 12 (1996) 3214-3218
188. Jiang A.Q., Li H.G., and Zhang L.D. Dielectric study in nanocrystalline prepared by chemical coprecipitation. J Appl Phys 83 9 (1998) 4878-4883
189. 12. J Am Ceram Soc 81 12 (1998) 3253-3259
190. 12 ceramics via a high-energy ball milling process. Mater Lett 51 (2001) 108-114
191. Shaw C.P., Gupta S., Stringfellow S.B., Navarro A., Alcock J.R., and Whatmore R.W. Pyroelectric properties of Mn-doped lead zirconate-lead titanate-lead magnesium niobate ceramics. J Eur Ceram Soc 22 (2002) 2123-2132
192. 12 by alternative routes: wet no-coprecipitation chemistry and mechanochemical activation. Chem Mater 13 (2001) 2084-2091
193. Ng S.H., Xue J.M., and Wang J. Bismuth titanate from mechanical activation of a chemically coprecipitated precursor. J Am Ceram Soc 85 11 (2002) 2660-2665
194. Shantha K., and Varma K.B.R. Preparation and characterization of nanocrystalline powders of bismuth vanadate. Mater Sci Eng B 56 (1999) 66-75
195. Shantha K., Subbanna G.N., and Varma K.B.R. Mechanically activated synthesis of nanocrystalline powders of ferroelectric bismuth vanadate. J Solid State Chem 142 (1999) 41-47
196. Shantha K., and Varma K.B.R. Characterization of fine-grained bismuth vanadate ceramics obtained using nanosized powders. J Am Ceram Soc 83 5 (2000) 1122-1128
197. Ricote J., Pardo L., Castro A., and Millán P. Study of the process of mechanochemical activation to obtain Aurivillius oxides with n = 1. J Solid State Chem 160 (2001) 54-61
198. 5 by a mechanochemical activation. J Mater Chem 10 (2000) 767-771
199. 6 solid solution: mechanosynthesis, structural study, and ferroelectric properties of the x = 0.75 member. Chem Mater 15 (2003) 3395-3401
200. 15-based ceramics for high-temperature applications. Mater Sci Eng B 99 (2003) 143-146
201. 15 ferroelectric ceramics. Solid State Commun 129 (2004) 707-710
202. 15 ceramics. Mater Sci Eng B 99 (2003) 363-366
203. Lu C.H., and Wu C.H. Preparation, sintering, and ferroelectric properties of layer-structured strontium bismuth titanatium oxide ceramics. J Eur Ceram Soc 22 (2002) 707-714
204. 15 ceramics. J Am Ceram Soc 82 (1999) 2368-2372
205. Sim M.H., Xue J.M., and Wang J. Layer structured calcium bismuth titanate by mechanical activation. Matter Lett 58 (2004) 2032-2036
206. Ng S.H., Xue J.M., and Wang J. High-temperature piezoelectric strontium bismuth titanate from mechanical activation of mixed oxides. Mater Chem Phys 75 (2002) 131-135
207. 15 by a mechanochemical activation route. Chem Mater 16 (2004) 1323-1329
208. Castro A., Millán P., Pardo L., and Jiménez B. Synthesis and sintering improvement of Aurivillius type structure ferroelectric ceramics by mechanochemical activation. J Mater Chem 9 (1999) 1313-1317
209. 9 from mechanochemically activated precursors. J Eur Ceram Soc 21 (2001) 1403-1407
210. 9 from mechanochemically activated precursors. J Eur Ceram Soc 21 (2001) 1399-1402
211. x ceramics obtained from amorphous precursors. J Phys Chem Solids 62 (2001) 951-958
212. 1-x Aurimillius type structure piezoelectric ceramics obtained from mechanochemically activated oxides. Acta Mater 48 (2000) 2421-2428
213. Moure A., Castro A., and Pardo L. Improvement by recrystallization of Aurivillius-type structure piezoceramics from mechanically activated precursors. Acta Mater 52 (2004) 945-957
214. Moure A., Alemany C., and Pardo L. Electromechanical properties of SBN/BTN Aurivillius-tpye ceramics up to the transition temperature. J Eur Ceram Soc 24 (2004) 1687-1691
215. de Figueiredo R.S., Messai A., Hernandes A.C., and Sombra A.S.B. Piezoelectric lithium miobate by mechanical alloying. J Mater Sci Lett 17 (1998) 449-451
216. Castro A., Jiménez B., Hungría T., Moure A., and Pardo L. Sodium niobate ceramics prepared by mechanical activation assisted methods. J Eur Ceram Soc 24 (2004) 941-945
217. Takacs L. Multiple combustion induced by ball milling. Appl Phys Lett 69 (1996) 436-438
218. Thadhani N.N. Shock-induced and shock-assisted solid-state chemical reactions in powder mixtures. J Appl Phys 76 (1994) 2129-2138
219. Kong L.B., Ma J., Zhu W., and Tan O.K. Phase formation of lead zirconate titanate via a high-energy ball milling process. J Mater Sci Lett 21 (2002) 25-27
220. 3 formation and decomposition of perovskite prepared by the PbO flux method. J Am Ceram Soc 75 (1992) 82-88
221. 3 (PZN) and consideration of stabilization conditions of perovskite type compounds. Mater Res Bull 30 (1995) 1121-1131
222. Sundararaman D. Nanocrystalline state and solid state amorphization. Mater Sci Eng B 32 (1995) 307-313
223. Fukunaga T., Ussumi M., Akatsuka H., Misawa M., and Mizutani U. Structure of amorphous Se prepared by milling. J Non-Cryst Solids 205-207 (1996) 531-535
224. Huang J.Y., Yasuda H., and Mori H. Deformation-induced amorphization in ball-milled silicon. Phil Mag Lett 79 (1999) 305-314
225. Yang X.Y., Wu Y.K., and Ye H.Q. Localized amorphization in SiC induced by ball milling. J Mater Sci Lett 20 (2001) 1517-1518
226. Schmücker M., Schneider H., and Mackenzie K.J.D. Mechanical amorphization of mullite and thermal recrystallization. J Non-Cryst Solids 226 (1998) 99-104
227. Kosanovic C., Bronic J., Cizmek A., Subotic B., Smit I., Stubicar M., et al. Mechanochemistry of zeolites: part 2. Change in particulate properties of zeolites during ball milling. Zoelites 15 (1995) 247-252
228. 3. J Am Ceram Soc 89 (2006) 431-437
229. 3 and Ni-Cu-Zn ferrite. J Am Ceram Soc 89 (2006) 438-443
230. Karmazin L., and James W.J. Precise measurement of lattice parameters of pseudocubic lattices. Acta Cryst A 28 (1972) 183-187
231. 3 complex perovskite ceramics. J Appl Phys 76 4 (1994) 2086-2092
232. 3. J Appl Phys 90 8 (2001) 4115-4121
233. 3 relaxor ferroelectric perovskites. J Am Ceram Soc 82 12 (1999) 3481-3484
234. 3. J Appl Phys 96 7 (2004) 3870-3875
235. 3 (PMN-PSN) relaxor ferroelectrics. J Am Ceram Soc 86 11 (2003) 1861-1866
236. 3. J Am Ceram Soc 83 1 (2000) 181-188
237. 3 (B″ = Nb, Ta) studied by Raman spectroscopy. J Mol Struct 661-662 (2003) 469-479
238. 3 microwave ceramics. J Appl Phys 94 5 (2003) 2414-2421
239. Wongmaneerung R., Yimnirun R., and Ananta S. Effect of vibro-milling time on phase formation and particle size of lead titanate nanopowders. Mater Lett 60 (2006) 1447-1452
240. 3 derived from mechanical activation. J Appl Phys 95 9 (2004) 4981-4988
241. 3 nanopowders by milling coprecipitation method. J Electroceramics 13 (2004) 367-371
242. 3 nanoceramic synthesized by high-energy ball milling. J Appl Phys 98 10 (2005) 104305-1-104305-8
243. Liu X., Akdogan E.K., Safari A., and Riman R.E. Mechanically activated synthesis of PZT and its electromechanical properties. Appl Phys A 81 (2005) 531-537
244. 3 powders. J Am Ceram Soc 87 5 (2004) 772-778
245. 2. J Mater Res 13 6 (1998) 1607-1613
246. Stojanovic B.D., Jovalekic C., Vukotic V., Simoes A.Z., and Varela J.A. Ferroelectric properties of mechanically synthesized nanosized barium titanate. Ferroelectrics 319 (2005) 65-73
247. 3 ceramics prepared by the combination of mechanosynthesized nanopowders and spark plasma sintering. Chem Mater 17 (2005) 6205-6212
248. Stojanovic B.D., Paiva-Santos C.O., Jovalekic C., Simoes A.Z., Filho F.M., Lazarevic Z., et al. Mechanically activating formation of layered structured bismuth titanate. Mater Chem Phys 96 (2006) 471-476
249. 2. J Non-Cryst Solids 352 (2006) 3058-3068
250. Chew C.L., Srinivas A., Sritharan T., and Boey F.Y.C. Mechanochemical activation of strontium bismuth tantalate synthesis. Scr Mater 53 (2005) 1197-1199
251. Cross L.E., and Newnham R.E. History of ferroelectrics, ceramics and civilization. High-technology ceramics - past, present and future vol. III (1987), American Ceramic Society, Westerville (OH) p. 289-305
252. Kong L.B., Ma J., Zhu W., and Tan O.K. Highly enhanced sinterability of commercial PZT powders by high-energy ball milling. Mater Lett 46 (2000) 274-280
253. Kong LB. Unpublished works.
254. 3. Ferroelectrics 319 (2005) 75-85
255. Tusseau-Nenez S., Ganne J.P., Maglione M., Morell A., Niepce J.C., and Pate M. BST ceramics: effect of attrition milling on dielectric properties. J Eur Ceram Soc 24 (2004) 3003-3011
256. 12 ceramics. Ceram Int 32 (2006) 707-712
257. 3 and its tetragonal-cubic transition enthalpy. J Solid State Chem 123 (1996) 301-305
258. 3. Microelectronic Eng 83 (2006) 463-470
259. 3 nanoparticles synthesized by RF-plasma CVD. J Alloys Comp 419 (2006) 234-242
260. 3 under various conditions. Mater Chem Phys 97 (2006) 481-487
261. Maison W., Kleeberg R., Heimann R.B., and Phanichphant S. Phase content, tetragonality, and crystalline size of nanoscaled barium titanate synthesized by the catecholate process: effect of calcination temperature. J Eur Ceram Soc 23 (2003) 127-132
262. 3. J Eur Ceram Soc 20 (2000) 1997-2007