In vitro rapid intraoral adjustment of porcelain prostheses using a high-speed dental handpiece

Acta Biomaterialia

Volumn 4, Issue 2, 2008, Pages 414-424

  Song, Xiao Fei ^a   Yin, Ling ^b   Han, Yi Gang ^a   Wang, Hui ^a  

^a TIANJIN UNIVERSITY   (China)

^b AUSTRALIAN NATIONAL UNIVERSITY   (Australia)

Author keywords

Dental handpiece bur; Fracture; In vitro; Intraoral adjustment; Porcelain prostheses

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); BRITTLE FRACTURE; DEBRIS; DENTAL PROSTHESES; FINITE ELEMENT METHOD;

DENTAL HANDPIECE/BUR; DENTAL HANDPIECES; ENERGY; FEEDRATE; HIGH SPEED; IN-VITRO; INTRAORAL ADJUSTMENT; PORCELAIN PROSTHESIS; SCANNING ELECTRON MICROSCOPIC; SUB-SURFACE DAMAGE;

PORCELAIN;

ANALYSIS OF VARIANCE; ARTICLE; CONTROLLED STUDY; DENTAL CARE; DRILL; ENERGY; FINITE ELEMENT ANALYSIS; FORCE; IN VITRO STUDY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SURFACE STRESS; TOOTH PROSTHESIS;

EID: 38949176674     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2007.08.006     Document Type: Article

References (39)

1. Kelly J.R. Ceramics in restorative and prosthetic dentistry. Annu Rev Mater Sci 27 (1997) 443-468
2. van Noort R. Dental ceramics. In: van Noort R. (Ed). Introduction to dental materials. 2nd ed. (2002), Elsevier, Oxford 231-246
3. Leinfelder K.F. Porcelain esthetics for the 21st century. J Am Dent Assoc 131 (2000) 47-51
4. Tinschert J., Zwez D., Marx R., and Anusavice K.J. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 28 (2000) 529-535
5. Hansen S. Preparations for Cerec 3: where are the limits. Int J Comput Dent 3 (2000) 197-205
6. Bindl A., and Mormann W.H. An up to 5-year clinical evaluation of posterior in-ceram CAD/CAM core crowns. Int J Prosthodont 15 (2002) 451-456
7. Otto T., and De Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays. Int J Prosthodont 15 (2002) 122-128
8. Lawn B.R., Deng Y., Miranda P., Pajares A., Chai H., and Kim D.K. Overview: damage in brittle layer structures from concentrated loads. J Mater Res 17 (2002) 3019-3036
9. Lawn B.R., Deng Y., Lloyd I.K., Janal M.N., Rekow E.D., and Thompson V.P. Materials design of ceramic-based layer structures for crowns. J Dent Res 81 (2002) 433-438
10. Jung Y.-G., Wuttiphan S., Peterson I.M., and Lawn B.R. Damage modes in dental layer structures. J Dent Res 78 (1999) 887-897
11. Burke F.J., Fleming G.J., Nathanson D., and Marquis P.M. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 4 1 (2002) 7-22
12. Rekow D., and Thompson V.P. Engineering long term clinical success of advanced ceramic prostheses. J Mater Sci: Mater Med 18 (2007) 47-56
13. Siegel S.C., and von Fraunhofer J.A. Effect of handpiece load on the cutting efficiency. Mach Sci Technol 1 (1997) 1-13
14. Yin L., Song X.F., Song Y.L., Huang T., and Li J. An overview of in vitro abrasive finishing and CAD/CAM of bioceramics in restorative dentistry. Int J Mach Tool Manufact 46 (2006) 1013-1026
15. Yin L., Song X.F., Qu S.F., Han Y.G., and Wang H. Surface integrity and removal mechanism in simulated dental finishing of a feldspathic porcelain. J Biomed Mater Res B Appl Biomater 79B (2006) 365-378
16. Yin L., Ives L.K., and Jahanmir S. Effects of fluids on the simulated clinical dental machining of a glass ceramic. J Am Ceram Soc 87 (2004) 173-175
17. Dong X., Yin L., Jahanmir S., Ives L.K., and Rekow E.D. Abrasive machining of glass-ceramics with a dental handpiece. Mach Sci Technol 4 (2000) 209-233
18. Yin L., Ives L.K., Jahanmir S., Rekow E.D., and Romberg E. Abrasive machining of glass-infiltrated alumina with diamond burs. Mach Sci Technol 5 (2001) 43-61
19. Yin L., Jahanmir S., and Ives L.K. Abrasive machining of porcelain and zirconia with a dental handpiece. Wear 255 (2003) 975-989
20. Sindel J., Petschelt A., Grellner F., Dierken C., and Greil P. Evaluation of subsurface damage in CAD/CAM machined dental ceramics. J Mater Sci: Mater Med 9 (1998) 291-295
21. Grellner F., Hoscheler S., Greil P., Sindel J., and Petschelt A. Residual stress measurements of computer aided design/computer aided manufacturing (CAD/CAM) machined dental ceramics. J Mater Sci 32 (1997) 6235-6242
22. Kelly J.R., Luthy H., Gougoulakis A., Pober R.L., and Mormann W.H. Machining effects on feldspathic porcelain and glass ceramic. In: Mormann W.H. (Ed). International symposium on computer restorations (1991), Quintessence, Chicago (IL) 253-273
23. Kelly J.R., Giordano R., Pober R., and Cima M.J. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont 3 (1990) 430-440
24. Anusavice K.J. Degradability of dental ceramics. Adv Dent Res 6 (1992) 82-89
25. Harvey C.K., and Kelly J.R. Contact damage as a failure mode during in vitro testing. J Prosthodont 5 (1996) 95-100
26. Peterson I.M., Pajares A., Lawn B.R., Thompson V.P., and Rekow E.D. Mechanical characterization of dental ceramics by Hertzian contacts. J Dent Res 77 (1998) 589-602
27. Deng Y., Lawn B.R., and Lloyd I.K. Characterization of damage modes in dental ceramic bilayer structures. J Biomed Mater Res B Appl Biomater 63 (2002) 137-145
28. Kim H.-W., Deng Y., Miranda P., Pajares A., Kim D.K., Kim H.-E., et al. Effect of flaw state on the strength of brittle coatings on soft substrates. J Am Ceram Soc 84 (2001) 2377-2384
29. Yin L., Song X.F., Qu S.F., Huang T., Mei J.P., Yang Z.Y., et al. Performance evaluation of a dental handpiece in simulation of clinical finishing using a novel 2-DOF in vitro apparatus. Proc IME H J Eng Med 220 (2006) 929-938
30. Chuang T.-J., Jahanmir S., and Tang H.C. Finite element simulation of straight plunge grinding for advanced ceramics. J Eur Ceram Soc 23 (2003) 1723-1733
31. Shih A.J., Mcspadden S.B., Morris T.O., Grant M.B., and Yonushonis T.M. High speed and high material removal rate grinding of ceramics using the vitreous bond CBN wheel. Mach Sci Technol 4 (2000) 43-58
32. Hwang T.W., Evans C.J., and Malkin S. Size effect for specific energy in grinding of silicon nitride. Wear 225-229 (1999) 862-867
33. Malkin S., and Hwang T.W. Grinding mechanisms for ceramics. Ann CIRP 45 (1996) 569-580
34. Watson T.F., Flanagan D., and Stone D.G. High and low torque handpieces: cutting dynamics, enamel cracking and tooth temperature. Br Dent J 188 (2000) 680-686
35. Yin L, Han YG, Song XF, Wang H. Characteristics of high efficient dental operations for ceramic prostheses using a computer-assisted handpiece. In: Srivatsan TS, Varin RA, editors. Fifteenth international symposium on processing and fabrication of advanced materials, MS&T'06, Cincinnati. Materials Park (OH): ASM International; 2006. p. 504--521.
36. Malkin S., and Ritter J.E. Grinding mechanisms and strength degradation for ceramics. J Eng Indus 111 (1989) 167-174
37. Hwang T.W., and Malkin S. Upper bound analysis for specific energy in grinding of ceramics. Wear 231 (1999) 161-171
38. Lawn B.R. Fracture and deformation in brittle solids: a perspective on the issue of scale. J Mater Res 19 (2004) 22-29
39. Lathabai S., Rodel J., Dabbs T., and Lawn B.R. Fracture mechanics model for subthreshold indentation flaws: Part I equilibrium fracture. J Mater Sci 26 (1991) 2157-2168