Sensitization of powder metallurgy type 430L stainless steel sintered in nitrogen-hydrogen atmosphere

Corrosion

Volumn 64, Issue 1, 2008, Pages 70-82

  Martin F ^a   Garcia C ^a   de Tiedra, P ^a   Blanco, Y ^a   Aparicio, M L ^a  

^a UNIVERSIDAD DE VALLADOLID   (Spain)

Author keywords

Electrochemical potentiokinetic reactivation double loop test; Electrochemical potentiokinetic reactivation test; Intergranular corrosion; Powder metallurgy ferritic stainless steel; Weight loss

Indexed keywords

CORROSION RESISTANCE; DISSOLUTION; FERRITIC STEEL; HEAT TREATMENT; HYDROGEN; NITROGEN; PRECIPITATION (CHEMICAL); SINTERING; STEEL POWDER METALLURGY;

ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION; EXPOSURE METHOD; INTERGRANULAR CORROSION; PHASE PRECIPITAITON; SENSITIZATION;

STAINLESS STEEL;

CORROSION RESISTANCE; DISSOLUTION; FERRITIC STEEL; HEAT TREATMENT; HYDROGEN; NITROGEN; PRECIPITATION (CHEMICAL); SINTERING; STAINLESS STEEL; STEEL POWDER METALLURGY;

EID: 38049090209     PISSN: 00109312     EISSN: None     Source Type: Journal    
DOI: 10.5006/1.3278464     Document Type: Article

References (34)

1. M. Aksoy, V. Kuzucu, M.H. Korfut, Wear 211, 2 (1997): p. 26.
2. M.C. Baran, B.A. Shaw, Int. J. Powder Metall. 36, 4 (2000): p. 57.
3. F. Borgioli, E. Galvanetto, T. Bacci, G. Pradelli, Surf. Coat. Technol. 149 (2002): p. 192.
4. C. Molins, J.A. Bas, J. Planas, Adv. Powder. Metall. Part. Mater. 5 (1992): p. 345.
5. Sobral, W. Ristow, D. Azambuja, I. Costa, C. Franco, Corros. Sci. 43 (2001): p. 1,019.
6. J.H. Reinshagen, G.D. Flick, "Improved Corrosion Resistant Stainless Steel-Based P/M Alloys," Proc. 1996 World Congress on Powder Metallurgy and Particulate Materials, held June 16-21 (Princeton, NJ: Metal Powder Industries Federation [MPIF], 1996), p. 17.6.
7. H. Hännimen, J. Romu, R. Ilola, J. Tervo, A. Laitinen, J. Mater. Process. Technol. 117 (2001): p. 424.
8. H. Baba, T. Kodama, Y. Katada, Corros. Sci. 44, 11 (2002): p. 2,393.
9. J.W. Simmons, Mater. Sci. Eng. A 207 (1996): p. 159.
10. T. Bacci, F. Borgioli, E. Galvanetto, G. Pradelli, Surf. Coat. Technol. 139 (2001): p. 251.
11. A.M. Maliska, A.M. de Oliveira, A.N. Klein, J.L.R. Muzart, Surf. Coat. Technol. 141 (2001): p. 128.
12. F. Borgioli. E. Galvanetto, T. Bacci, G. Pradelli, Surf. Coat. Technol. 149 (2002): p. 192.
13. M. Torralba, A. Monsoriu, J.M. Ruiz-Roman, J.R. Ibars, F. Velasco, J. Mater. Process. Technol. 53 (1995): p. 433.
14. C. García, F. Martín, P. de Tiedra, L. García Cambronero, Corros. Sci. 49 (2007): p. 1,718.
15. C. García, F. Martín, P. de Tiedra, Y. Blanco, J.M. Ruíz-Roman, M. Aparicio, "Electrochemical Reactivation Methods Applied to PM Austenitie Stainless Steels Sintered in Nitrogen-Hydrogen Atmosphere," Corros. Sci. (2007): DOI: 10.1016/j.corsci.2007.10.001.
16. ASTM A763-93, "Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels," in Annual Book of ASTM Standards West Conshohocken, PA: ASTM International, 1999), p. 1.
17. ASTM G 108-92, "Standard Test Method for EPR for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels," in Annual Book of ASTM Standards (West Conshohocken, PA: ASTM International, 1993), p. 457.
18. J. Ibars, "Optimization of Potentiokinetic Reactivation Methods to Characterization Austenitic Stainless Steels Behavior to Intergranular Corrosion" (Ph.D. diss., Universidad Politécnica de Madrid, 1986), p. 63.
19. W.L. Clarke, V.M. Romero, J.C. Danko, "Detection of Sensitization in Stainless Steels Using Electrochemical Techniques," CORROSION/77, paper no. 180 (Houston, TX: NACE International, 1977).
20. V. Čihal, R. Štefec, Electrochim. Acta 46 (2001): p. 3,867.
21. W.-F. Wang, M.-J. Wu, Mater. Sci. Eng. A 425 (2006): p. 167.
22. E. Stagno, M.R. Pinasco, G. Palombarini, M.G. lenco, G.F. Boxxhini, J. Alloys Compd. 247 (1997): p. 172.
23. S. Takaki, N. Nakamura, H. Goto, H. Hanninen, S. Hertzman, J. Romu, "Alloy Design for Suppressing Eutectoid Reaction in High Nitrogen Austenitic Steels," Proc. 5th Int. Conf. of High-Nitrogen Steels 98, held May 24-28 (Stockholm, Sweden: Trans Tech Publications, 1998), p. 249.
24. N. Nakamura, S. Tkai, ISIJ Int. 36, 7 (1996): p. 922.
25. S. Takaki, N. Nakamura, H. Hänninen, S. Hertzman, J. Rosu, "Metallurgy of Nitrogen Absorption Process in High Cr Steels," Proc. 5th Int. Conf. of High-Nitrogen Steels 98, held May 24-28 (Stockholm, Sweden: Trans Tech Publications, 1998), p. 318.
26. H. Tsujimura, T. Goto, Y. Ito, Mater. Sci. Eng. 355, 1-2 (2003): p. 315.
27. O. Öztürk, O. Onmus, D.L. Williamson, Surf. Coat. Technol. 196 (2004): p. 333.
28. A.A. Guimarä, P.R. Mei, J. Mater. Process. Technol. 155-156 (2004): p. 1,681.
29. S.A. Sarmiento, J.L.R. Muzart, Rev. Colomb. Fis. 38, 1 (2006): p. 265.
30. M.B. Cortie, H. Pollak, Mater. Sci. Eng. A 199 (1995): p. 153.
31. J.R. Davis, Stainless Steel ASM Specialty Handbook (Materials Park, OH: ASM International, 1994), p. 50.
32. A.W. Marshall, J.C.M. Farrar, Soudage Techn. Connexes 82 (2003): p. 14.
33. H.F.G. de Abreu, A.D.S. Bruno, S.S.M. Tavares, R.P. Santos, S.S. Carvalho, Mater. Charact. 57 (2006): p. 342.
34. F. Iacoviello, F. Casari, S. Gialanella, Corros. Sci. 47 (2005): p. 909.