Electrochemical reactivation methods applied to PM austenitic stainless steels sintered in nitrogen-hydrogen atmosphere

Corrosion Science

Volumn 50, Issue 3, 2008, Pages 687-697

  Garcia C ^a   Martin F ^a   de Tiedra, P ^a   Blanco, Y ^a   Ruiz Roman J M ^b   Aparicio, M ^a  

^a UNIVERSIDAD DE VALLADOLID   (Spain)

^b UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

A. Stainless steel; B. Polarization; B. Weight loss; C. Intergranular corrosion; C. Repassivation

Indexed keywords

HYDROGEN; INTERMETALLICS; NITROGEN; PARAMAGNETIC RESONANCE; PRECIPITATES; SINTERING;

ELECTROCHEMICAL REACTIVATION METHODS; INTERGRANULAR CORROSION; REPASSIVATION; WEIGHT LOSS;

AUSTENITIC STAINLESS STEEL;

AUSTENITIC STAINLESS STEEL; HYDROGEN; INTERMETALLICS; NITROGEN; PARAMAGNETIC RESONANCE; PRECIPITATES; SINTERING;

EID: 39749155931     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2007.10.001     Document Type: Article

References (34)

1. E.M. Daver, C.J. Trombino, State of the North American PM Industry-2006 report, MPIF (Metal Powder Industries Federation), San Diego, June 21, 2006.
2. Road R., and Lane T. PM Stainless steels uses in automotive exhausts. Met. Powder Rep. 26 (1998) 22-26
3. Capus J.M. Stainless steel at the 2000 Powder Metallurgy Conference. Adv. Mater. Process. 9 (2000) 57-60
4. Borgioli F., Galvanetto E., Bacci T., and Pradelli G. Influence of the treatment atmosphere on the characteristics of glow-discharge treated sintered stainless steels. Surf. Coat. Technol. 149 (2002) 192-197
5. Sandberg O., and Jönson L. Advances in Powder Metallurgy. Adv. Mater. Process. 12 (2003) 37-42
6. Lindskog P. The future of ferrous PM in Europe. Powder Metall. 47 (2004) 6-9
7. Sobral, Ristow W., Azambuja D., Costa I., and Franco C. Potentiodynamic tests and electrochemical impedance spectroscopy of injection molded 316L steel in NaCl solution. Corr. Sci. 43 (2001) 1019-1030
8. Otero E., Pardo A., Utrilla M., Perez F., and Merino C. The corrosion behaviour of AISI 304L and 316L stainless steels prepared by powder metallurgy in the presence of organic acids. Corr. Sci. 39 (1997) 453-463
9. Corpas Iglesias F.A., Ruiz Roman J.M., Ruiz Prieto J.M., Garcia Cambronero L., and Iglesis Godino F.J. Effect of nitrogen on sintered duplex stainless steel. Powder Metall. 46 (2003) 39-42
10. Reinshagen J.H., and Flick G.D. Effect of copper and bronze addition on corrosion resistance of alloyed 316L stainless steel cladded on plain carbon steel by powder metallurgy. Proceedings, Advances in Powder Metallurgy Particulate Material vol. 5 (1996), Metal Powder Industries Federation, Washington 17.61-17.71
11. Hännimen H., Romu J., Ilola R., Tervo J., and Laitinen A. Effects of processing and manufacturing of high nitrogen -containing stainless steels on their mechanical, corrosion and wear properties. J. Mater. Process. Technol. 117 (2001) 424-430
12. Bacci T., Borgioli F., Galvanetto E., and Pradelli G. Glow-discharge nitriding of sintered stainless steels. Surf. Coat. Technol. 139 (2001) 251-256
13. Maliska A.M., de Oliveira A.M., Klein A.N., and Muzart J.L.R. Surface porosity sealing effect of plasma nitrocarburizing on sintered unalloyed iron. Surf. Coat. Technol. 141 (2001) 128-134
14. Sharon A., and Itzhak D. The environmental behavior of SAE 304L stainless steel sintered in the presence of a copper base additive. Mater. Sci. Eng. A 224 (1997) 177-186
15. Chen W., Wu Y., and Shen J. Effect of copper and bronze addition on corrosion resistance of alloyed 316L SS cladded on plain carbon steel by powder metallurgy. J. Mater. Sci. Technol. 20 2 (2004) 217-220
16. Torralba J.M., Monsoriu A., Ruiz-Roman J.M., Ibars J.R., and Velasco F. Corrosion behaviour of P/M duplex stainless steels made from prealloyed and mixed powders. J. Mater. Process. Technol. 53 (1995) 433-440
17. Velasco F., Ruiz Roman J.M., M- Torralba J., and Ruiz Prieto J.M. Corrosion resistance of alloyed powder metallurgy austenitic stainless steels in acid solutions. Brit. Corr. J. 31 4 (1996) 295-299
18. Wang W.-F. Effect of MnS powder addition and sintering temperature on the corrosion resistance of sintered 3030LSC stainless steels. Corr. Sci. 45 (2003) 957-966
19. Abenojar J., Velasco F., Bautista A., Campos M., Bas J.A., and Torralba J.M. Atmosphere influence in sintering process of stainless steels matrix composites reinforced with hard particles. Compos. Sci. Technol. 63 (2003) 69-79
20. Shankarm J., Upadhyaya A., and Balasubramaniam R. Electrochemical behavior of sintered oxide dispersion strengthened stainless steels. Corr. Sci. 46 (2004) 487-498
21. García C., Martín F., de Tiedra P., and García Cambronero L. Pitting corrosion behaviour of PM austenitic stainless steels sintered in nitrogen-hydrogen atmosphere. Corr. Sci. 49 (2007) 1718-1736
22. ASTM Standard A262-91, Standard Practice for detecting susceptibility to intergranular attack on austenitic Stainless Steels, ASTM, Philadelphia, 1993, pp. 1-18.
23. ASTM Standard G108-92, Standard test method for EPR for detecting sensitization of AISI Type 304 and 304L Stainless Steels, ASTM, Philadelphia, 1993, pp. 457-463.
24. J. Ibars, "Optimizacion de los metodos de polarizacion-reactivacion potenciocinetica para caracterizar el comportamiento de los aceros inoxidables austeniticos frente a la corrosion intergranular", Ph.D. Thesis, ETSII, Universidad Politécnica de Madrid, Madrid, 1987.
25. W.L. Clarke, V.M. Romero, J.C. Danko, Detection of sensitization in stainless steels using electrochemical techniques, in: Proceedings, Corrosion/77, Reprint No. 180, NACE International, Houston, 1977.
26. Čihal V., and Štefec R. On the development of the electrochemical potentiokinetic method. Electrochim. Acta 46 (2001) 3867-3877
27. Heat-resistant alloys, in: Metallography and Microstructures, ASM Metals Handbook, ninth ed., vol. 9, Ohio, 1978, pp. 332-334.
28. Rawers J., Bennett J., Doan R., and Siple J. Nitrogen solubility and nitride formation in Fe-Cr-Mn-Ni alloys. Acta Metall. Mater. 40 6 (1992) 1195-1199
29. 2N in Cr-Mn-N austenitic stainless steel. Scripta Mater. 37 3 (1997) 285-291
30. Ustinovshikov Y., Ruts A., Bannykh O., Blinov V., and Kostina M. Microstructure and properties of the high-nitrogen Fe-Cr austenite. Mater. Sci. Eng. A 262 (1999) 82-87
31. Öztürk O., and Williamson D.L. Thermal stability of the high-N solid-solution layer on stainless steel. Surf. Coat. Technol. 158-159 (2002) 288-294
32. Xu X.L., Wans L., Yu Z.W., and Hei Z.K. Microstructural characterization of plasma nitrided austenitic stainless steel. Surf. Coat. Technol. 132 2-3 (2000) 270-274
33. Wang W.-F., and Wu M.-J. Effect of silicon content and aging time on density, hardness, toughness and corrosion resistance of sintered 303LSC-Si stainless steels. Mater. Sci. Eng. A 425 (2006) 167-171
34. Angelini E., Bianco P., Rosalbino F., Rosso M., and Scavino G. Sintered austenitic stainless steels: Corrosion behaviour in sulphate and chloride media. Mater. Corr. 45 (1994) 392-401