Pitting corrosion behaviour of PM austenitic stainless steels sintered in nitrogen-hydrogen atmosphere

Corrosion Science

Volumn 49, Issue 4, 2007, Pages 1718-1736

  Garcia C ^a   Martin F ^a   de Tiedra, P ^a   Cambronero, L García ^b  

^a UNIVERSIDAD DE VALLADOLID   (Spain)

^b UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

A. Stainless steel; B. Polarization; B. Weight loss; C. Pitting corrosion

Indexed keywords

CORROSION RESISTANCE; ELECTROCHEMICAL CORROSION; MICROSTRUCTURE; PASSIVATION; POLARIZATION; STAINLESS STEEL;

ANODIC POLARIZATION; PITTING CORROSION; WEIGHT LOSS;

PITTING;

CORROSION RESISTANCE; ELECTROCHEMICAL CORROSION; MICROSTRUCTURE; PASSIVATION; PITTING; POLARIZATION; STAINLESS STEEL;

EID: 33847650107     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2006.10.009     Document Type: Article

References (38)

1. Road R., and Lane T. PM stainless steels uses in automotive exhausts. Metal Powder Report 26 (1998) 22-26
2. Capus J.M. Stainless steel at the 2000 powder metallurgy conference. Advanced Materials and Processes 9 (2000) 57-60
3. Lindskog P. The future of ferrous PM in Europe. Powder Metallurgy 47 (2004) 6-9
4. Sandberg O., and Jönson L. Advances in powder metallurgy. Advanced Materials and Processes 12 (2003) 37-42
5. Sobral A., Ristow W., Azambuja D., Costa I., and Franco C. Potentiodynamic tests and electrochemical impedance spectroscopy of injection molded 316L steel in NaCl solution. Corrosion Science 43 (2001) 1019-1030
6. Otero E., Pardo A., Utrilla M., Perez F., and Merino C. The corrosion behaviour of AISI 304L AND 316L stainless steels prepared by powder metallurgy in the presence of organic acids. Corrosion Science 39 (1997) 453-463
7. Pao M.P., Klar E., Nayar S.L., Kaufman S.M., and Meiners K.E. Corrosion phenomena in regular and tin-modified P/M stainless steels. Progress in Powder Metallurgy 47 (1984) 431-444
8. Peled P., and Itzhak D. The corrosion behavior of double pressed, double sintered stainless steel containing noble alloying elements. Corrosion Science 30 (1989) 59-65
9. Seah K.H.W., Thampuran R., and Teoh S.H. The influence of pore morphology on corrosion. Corrosion Science 40 4/5 (1998) 547-556
10. Angelini E., Bianco P., Rosalbino F., Rosso M., and Scavino G. Sintered austenitic stainless steels: corrosion behaviour in sulphate and chloride media. Werkstoffe und Korrosion 45 (1994) 392-401
11. Kim J.S., Peelen W.H.A., Hemmes K., and Makkus R.C. Effect of alloying elements on the contact resistance and the passivation behaviour of stainless steels. Corrosion Science 44 (2002) 635-655
12. Kamachi Mudali U., Shankar P., Ningshen S., Dayal R.K., Khatak H.S., and Raj B. On the pitting corrosion resistance of nitrogen alloyed cold worked austenitic stainless steels. Corrosion Science 44 (2002) 2183-2198
13. Baba H., Kodama T., and Katada Y. Role of nitrogen on the corrosion behavior of austenitic stainless steels. Corrosion Science 44 (2002) 2393-2407
14. Toro A., Sinatora A., Tanaka D.K., and Tschiptschin A.p. Corrosion-erosion of nitrogen bearing martensitic stainless steels in seawater-quartz slurry. Wear 251 (2001) 1257-1264
15. Abdel-Karim R., Elmahallawi I., and El-Menshawy K. Microstructure and corrosion properties of nitrogen stainless steel 316L produced by hipping. Powder Metallurgy 47 1 (2004) 43-48
16. Lim Y.S., Kim J.S., Ahn S.J., Kwon H.S., and Katada Y. The influences of microstructure and nitrogen alloying on pitting corrosion of type 316L and 20 wt.% Mn-substituted type 316L stainless steels. Corrosion Science 43 (2001) 53-68
17. Hännimen H., Romu J., Ilola R., Tervo J., and Laitinen A. Effects of processing and manufacturing of high nitrogen containing stainless steels on their mechanical, corrosion and wear properties. Journal of Materials Processing Technology 117 (2001) 424-430
18. Jargelius-Pettersson R.F.A. Electrochemical investigation of the influence of nitrogen alloying on pitting corrosion of austenitic stainless steels. Corrosion Science 41 (1999) 1639-1666
19. Li S., Huang B., Li D., Li Y., Liang S., and Zhou H. Influence of sintering atmospheres on densification process of injection moulded gas atomised 316L stainless steel. Powder Metallurgy 46 (2003) 241-245
20. Bacci T., Borgioli F., Galvanetto E., and Pradelli G. Glow-discharge nitriding of sintered stainless steels. Surface and Coatings Technology 139 (2001) 251-256
21. Borgioli, Galvanetto E., Bacci T., and Pradelli G. Influence of the treatment atmosphere on the characteristics of glow-discharge treated sintered stainless steels. Surface and Coatings Technology 149 (2002) 192-197
22. Maliska A.M., de Oliveira A.M., Klein A.N., and Muzart J.L.R. Surface porosity sealing effect of plasma nitrocarburizing on sintered unalloyed iron. Surface and Coatings Technology 141 (2001) 128-134
23. Sharon A., and itzhak D. The environmental behavior of SAE 304L stainless steel sintered in the presence of a copper base additive. Materials Science and Engineering A224 (1997) 177-186
24. Velasco F., Ruiz Roman J.M., Torralba J.M., and Ruiz Prieto J.M. Corrosion resistance of alloyed powder metallurgy austenitic stainless steels in acid solutions. British Corrosion Journal 31 4 (1996) 295-299
25. Wang W.-F. Effect of Mn S powder addition and sintering temperature on the corrosion resistance of sintered 3030LSC stainless steels. Corrosion Science 45 (2003) 957-966
26. Abenojar J., Velasco F., Bautista A., Campos M., Bas J.A., and Torralba J.M. Atmosphere influence in sintering process of stainless steels matrix composites reinforced with hard particles. Composites Science and Technology 63 (2003) 69-79
27. Shankarm J., Upadhyaya A., and Balasubramaniam R. Electrochemical behavior of sintered oxide dispersion strengthened stainless steels. Corrosion Science 46 (2004) 487-498
28. Castro L., Merino S., Levenferld B., Varez A., and Torralba J.M. Mechanical properties and pitting corrosion behaviour of 316L stainless steel parts obtained by a modified metal injection moulding process. Journal of Materials Processing Technology 143-144 (2003) 397-402
29. 2 ratio on r.f. plasma surface treatment of austenite stainless steel. Surface and Coating Technology 183 (2004) 268-274
30. Chen F.-S., and Chang C.-N. Effect of CH4 addition on plasma nitrocarburizing of austenitic stainless steel. Surface and Coatings Technology 173 (2003) 9-18
31. Simmons J.W. Overview: high-nitrogen alloying of stainless steels. Materials Science and Engineering A207 (1996) 159-169
32. ASTM Standards. Corrosion-Erosion (1993), ASTM
33. Heat-resistant alloys in metallography and microstructures, ASM Metals Handbook, ninth ed., vol. 9, Ohio, 1978, pp. 332-334.
34. Rawers J., Bennett J., Doan R., and Siple J. Nitrogen solubility and nitride formation in Fe-Cr-Mn-Ni alloys. Acta Metall. Mater. 40 6 (1992) 1195-1199
35. Santhi Sninivas N.C., and Kutumbarao V.V. On the discontinuous precipitates of Cr2N in Cr-Mn-N austenitic stainless steel. Scripta Materialia 37 3 (1997) 285-291
36. Öztürk O., and Williamson D.L. Thermal stability of the high-N solid-solution layer on stainless steel. Surface and Coating Technology 158-159 (2002) 288-294
37. Xu X.L., Wans L., Yu Z.W., and Hei Z.K. Microstructural characterization of plasma nitrided austenitic stainless steel. Surface and Coating Technology 132 2-3 (2000) 270-274
38. Ustinovshikov Y., Ruts A., Bannykh O., Blinov V., and Kostina M. Microstructure and properties of the high-nitrogen Fe-Cr austenite. Materials Science and Engineering A262 (1999) 82-87