Combined approach for the characterization of composites manufactured by RFI and industrial application

Journal of Composite Materials

Volumn 42, Issue 2, 2008, Pages 189-209

  Margueres, Philippe ^a   Torres, Jorge Lopez ^a   Perie, Jean Nol ^a   Muhammad, Kashif Syed ^a   Collombet, Francis ^a  

^a University of Toulouse Clement Ader Institute   (France)

Author keywords

Autoclave; Characterization; HexFIT ; Industrial application; Multi instrumentation; NDE; Oven; Resin film infusion (RFI); Strain field measurements; Vacuum bag molding

Indexed keywords

AUTOCLAVES; INDUSTRIAL APPLICATIONS; INFRARED RADIATION; TENSILE TESTING; VACUUM APPLICATIONS;

RESIN FILM INFUSION (RFI); STRAIN FIELD MEASUREMENTS; VACUUM BAG MOLDING;

COMPOSITE MATERIALS;

EID: 37849031037     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998307086200     Document Type: Article

References (47)

1. HexFIT®. Film Infusion Technology for the Rapid and Cost-effective Manufacture of Composites, HEXCEL Composites Product Literature, March 2001.
2. HexPly® M9.1F/M9.6F 75-160°C Curing Epoxy Matrix. HEXCEL Composites-Provisional Product Data, October 2005.
3. Baker, A. (2001). Australian Research into Aircraft Applications of High-performance Fiber Composites. In: Proceedings of APEC Forum on Science and Technology 'Materials Science in the 21st Century ', Suzhou, China, APEC Technomart IV, September.
4. Letterman, L.E. (1986). Resin Film Infusion Process and Apparatus. US Patent No. 4,622,091.
5. Shenoi, R.A. and Wellicome, J.F. (eds) (1993). Production of Ships with Single Skin Structures, Composite Materials in Maritime Structures Volume 2: Practical Consideration, pp. 91 - 116, Cambridge Ocean Technology Series, Southampton.
6. Lazarus, P. (1994). Vacuum-bagging on the Production Line. Professional Boatbuilder, August 18-24.
7. Lazarus, P. (1994). Infusion. Professional Boatbuilder, October.
8. Seemann, W.H. (1990). Plastic Transfer Moulding Techniques for the Production of Fiber Reinforced Plastic Structures. US Patent 4,902,215.
9. Seemann, W.H. (1991). Plastic Transfer Molding Apparatus for the Production of Fiber Reinforced Plastic Structures. US Patent 5,052,906.
10. Gebart, B.R., Lundemo, C.Y. and Gudmundson, P. (1992). An Evaluation of Alternative Injection Strategies in RTM, In: Proc. 47th Annual Conference of the Society of Plastics Institute, Cincinnati, USA, February 1992.
11. Lopez Torreq, J. and Syed Muhammad, K. (2003). Characterization of Composite Material: HexFIT®, DEA Report, University Paul Sabatier III, Toulouse, France.
12. Marguers, Ph., Lopez Torres, J., Syed Muhammad, K. and Olivier, O. (2004). Mthodologie de Caractrisation des Structures Composites Obtenues par RFI, JST AMAC ''Mise en Forme des Matriaux Composites '', Havre, France, December 2-3.
13. Marguers, Ph., Lopez Torres, J., Olivier, Ph. and Collombet, F. (2005). Mthodologie De Caractrisation Des Structures Composites Obtenues Par RFI Avec Le Matriau HexFITTM, Revue des Composites et des Matriaux Avancs, 15 (3). 401 - 412.
14. Marguers, Ph., Pri, J.N., Gutierez Perez, J. and Collombet, F. (2005). Caractrisation d'une Structure Composite Obtenue par RFI Partir d'un Nouveau Matriau, l'HexFIT®, In: Proceedings of the JNC 14, Compigne, France, March 22-24, pp. 69-77.
15. Lopez Torres, J., Marguers, Ph. and Collombet, F. (2006). Etude de la Fabrication d'un Coin de Malle par RFI, Journe Scientifique de l'ONERA-JST AMAC/Mise en Forme des Matriaux Composites, Chtillon, France, October 13.
16. Lopez Torres, J., Marguers, Ph. and Collombet, F. (2006). Study for Manufacturing a Corner Fitting by Resin Film Infusion Process, In: CD-ROM Proceedings of ECCM12-Ref. 604, Biarritz, France, 29th August-1st September.
17. Qi, R.B., Kruckenberg, T. and Stanning, R. (1999). A Resin Film Infusion Process for Manufacture of Advanced Composite Structures, Composite Structures, 47 (1). 471 - 476.
18. Kleineberg, M., Wenner, U. and Hanke, M. (2002). Fuselage Manufacturing with Liquid Resin Infusion (LRI) Technologies, pp. 1 - 10, DLR Institutes of Structural Mechanics, Lilienthalplatz, Braunschweig.
19. Kendall, K.N. (1994). High Speed Processing, in Report on the Workshop on Manufacturing Polymer Composites by Liquid Molding. In: Parnas, R.S., Salem, A.J., Kendall, K.N. and Bruschke, M.V. (eds), NISTIR 5373, National Institute of Standards & Technology, Washington, DC.
20. Marsh, G. (2002). Resin Film Infusion Composites Cost Reducer, Reinforced Plastics, February, pp. 44 - 49.
21. Hinrichsen, J. and Bautista, C. (2001). The Challenge of Reducing Both Airframe Weight and Manufacturing Cost, Space Europe, 3 (3 - 4). 119 - 121.
22. SP Resin Infusion Technology: SPRINTTM, SP Systems Composite Engineering Materials Guide to Composites, January 2002.
23. Herrmann, A.S. and Kleineberg, M. (1999). Low Cost Primary Composite Structures. In: EUROMAT 99, pp. 343-351, Mnchen, ISBN: 3-527-30124-0.
24. Qui, B., Raju, J. and Kuruckenburg, T. (1999). Manufacture of Advanced Composites Using the RFI Process, In: 6th SAMPE Symposium, Tokyo, Japan, Oct. 1999.
25. Lunn, P. (2004). Tooling Materials Ideal for Resin Infusion, Reinforced Plastics, September, pp. 28 - 30.
26. Kang, M.K. and Lee, W.L. (2001). Analysis of Vacum Bag Resin Transfer Molding Process, Composites Part A, 33 (11). 1605 - 1614.
27. Beckwith, S.W. and Hyland, C.R. (1996). Closed Molding: RTM and Vacuum Infusion Technologies, In: Proceedings of Composites 96, October, Composite Fabricators Association, Dallas, TX.
28. Johnson, V.J. and Holzwarth, R.C. (1997). Low Cost Manufacture-Unitised Structures, Aerospace 2020 AR360, Vol. III, Background Paper [AGARD3].
29. Schaefer, H.A., Stickler, P.B. and McCarville, D.A. (2001). Manufacturing Evaluation of a Low Cost Composite Fitting for an Aerospace Application, 33rd ISTC, Seattle, WA. November 5-8.
30. Antonucci, V., Giordano, M., Nicolais, L., Calabr, A., Cusano, A., Cutolo, A. and Inserra, S. (2003). Resin Flow Monitoring in Resin Film Infusion Process, Journal of Materials Processing Technology, 143 - 144: 687 - 692.
31. Williams, C.D., Summerscales, J. and Grove, S.M. (1996). Resin Infusion Under Flexible Tooling (RIFT): a Review, Composites Part A: Applied Science and Manufacturing, 27A (7). 517 - 524.
32. Cripps, D., Searle, T.J. and Summerscales, J. (2000). Open Mould Techniques for Thermoset Composites, In: Talreja, R. and Manson, J.A. (eds), Comprehensive Composite Materials Encyclopædia, Volume 2: Polymer Matrix Composites, pp. 737 - 761, Elsevier Science, Oxford.
33. Summerscales, J. and Searle, T.J. (2005). Review: Low Pressure (Vacuum Infusion) Techniques for Moulding Large Composite Structures, In: Proceedings of the I Mech E Part L Journal of Materials: Design and Applications, 219(1): 45-58.
34. Williams, C.D., Grove, S.M. and Summerscales, J. (1998). Compressive Response of Fibre Reinforced Plastics Plates During Manufacture by The Resin Infusion Under Flexible Tooling Method. Composites Part A: Applied Science and Manufacturing, 29A (1 / 2). 111 - 114.
35. Stockton, D.J., Forster, R. and Messner, B. (1998). Developing Time Estimating Models for Advanced Composite Manufacturing Processes, Aircraft Engineering and Aerospace Technology: An International Journal, 70 (6). 445 - 450.
36. Blest, D.C., McKee, S., Zulkifle, A.K. and Marshall, P. (1999). Curing Simulation by Autoclave Resin Infusion, Composites Science and Technology, 59 (16). 2297 - 2313.
37. Krusche, T. and Michaeli, W. (1996). Resin Infusion Technology for the Autoclave Process,International SAMPE Symposium. Exhibition, 41 (2). 1542 - 1550.
38. Lagarde, A. (2000). IUTAM Symposium on Advanced Optical Methods and Applications in Solid Mechanics, Kluwer, The Netherlands.
39. Hild, F., Raka, B., Baudequin, M., Roux, S. and Cantelaube, F. (2002). Multiscale Displacement Field Measurements of Compressed Mineral-Wool Samples by Digital Image Correlation, Applied Optics, 41 (32). 6815 - 6828.
40. Gay, D. (1989). Matriaux Composites, Herms, ISBN 2-86601-190-2.
41. Mouritz, A.P. and Cox, B.N. (2000). A Mechanistic Approach to the Properties of Stitched Laminates, Composites Part A, 31 (1). 1 - 27.
42. Thuis, H.G.S.J. and Bron, E. (1996). The Effect of Stitching Density and Laminate Lay Up on the Mechanical Properties on Stitched Carbon Fabrics, National Luchten Ruimtevaarlaboratorium report NLR CR 96126L.
43. Kang, T.J. and Lee, S.H. (1998). Effect of Stitching on the Mechanical and Impact Properties of Woven Laminate Composites, Journal of Composite Materials, 28 (16). 1574 - 1587.
44. Broughton, W.R., Lodeiro, M.J., Sims, G.D., Zeqiri, B., Hodnett, M., Smith, R.A. and Jones, L.D. (1999). Standardized Procedures for Ultrasonic Inspection of Polymer Matrix Composites, ICCM 12, Paris, France.
45. Olivier, Ph., Marguers, Ph., Mascaro, B., Tarsha-Kurdi, K.E. and Collombet, F. (2006). Assessment of the Effects of Voids on Some Physical, Mechanical and Damage Mechanics Properties of Carbon/Polymeric Composites, In: CD-ROM Proceedings of ECCM12-Ref. 350, Biarritz, France, 29th August-1st September.
46. Mascaro, B., Dominguez, N., Marguers, P.H. and Gibiat, V. (2006). Caractrisation Ultrasonore De La Porosite Dans Les Composites Carbone/Epoxy Stratifies-Evaluation Globale Et Detection De Zones De Porosite Localisees Dans L'epaisseur, JST AMAC-COFREND 'Contrles Non Destructifs Et Matriaux Composites ', Toulouse, France, June 27-28.
47. Mascaro, B., Dominguez, N., Marguers, P.H. and Gibiat, V. (2007). Caractrisation Ultrasonore De La Porosite Dans Les Composites Carbone/Epoxy Stratifies-Evaluation Globale Et Detection De Zones De Porosite Localisees Dans L'epaisseur, Revue des Composites et des Matriaux Avancs, 17 (2). 157 - 167.