Low-pressure (vacuum infusion) techniques for moulding large composite structures

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

Volumn 219, Issue 1, 2005, Pages 45-58

  Summerscales, J ^a   Searle, T J ^a  

^a UNIVERSITY OF PLYMOUTH   (United Kingdom)

Author keywords

Composites manufacturing; Flexible tooling; Resin infusion; RIFT; SCRIMP; Vacuum infusion; VARTM

Indexed keywords

AIR PERMEABILITY; FIBER REINFORCED MATERIALS; FINITE ELEMENT METHOD; LAMINATES; MATHEMATICAL MODELS; MOLDING; REINFORCEMENT; RESIN TRANSFER MOLDING; VISCOSITY;

COMPOSITE MANUFACTURING; FLEXIBLE TOOLING; RESIN INFUSION; RESIN INFUSION UNDER FLEXIBLE TOOLING (RIFT); SCRIMP; VACUUM INFUSION; VARTM;

COMPOSITE STRUCTURES;

EID: 14844366325     PISSN: 14644207     EISSN: None     Source Type: Journal    
DOI: 10.1243/146442005X10238     Document Type: Conference Paper

References (120)

1. Åström, B. T. Manufacturing of Polymer Composites, 1997 (Chapman & Hall, London).
2. Gutowski, T. G. Advanced Composites Manufacturing, 1997 (J Wiley, New York).
3. Davé, R. S. and Loos, A. C. Processing of Composites, 1999 (Hanser, Munich).
4. Campbell Jr, F. C. Manufacturing Processes for Advanced Composites, 2003 (Elsevier Advanced Technology, Oxford).
5. Ciriscioli, P. R. and Springer, G. S. Smart Autoclave Cure of Composites, 1990 (Technomic, Lancaster, PA).
6. Seferis, J. C. Prepregging and autoclaving. In Comprehensive Composite Materials Encyclopædia, volume 2: Polymer Matrix Composites (Ed. R. Talreja and J.-A. Månson), 2000, Chap. 20, pp. 701-736 (Elsevier, Oxford).
7. Noakes, K. Successful Composite Techniques: a Practical Introduction to the Use of Modern Composite Materials, 2nd edn, 1992 (Osprey Automotive, London).
8. McBeath, S. and O'Rourke, B. Competition Car Composites: a Practical Handbook, 2000 (Haynes, Sparkford).
9. van Harten, K. Production by resin transfer moulding. In Composite Materials in Maritime Structures (Ed. R. A. Shenoi and J. F. Wellicome), 1993, Chap. 4, pp. 86-126 (Cambridge University Press, Cambridge).
10. Potter, K. Resin Transfer Moulding, 1997 (Chapman & Hall, London).
11. Rudd, C. D., Long, A. C., Kendall, K. N., and Mangin, C. G. E. Liquid Moulding Technologies, 1997 (Woodhead, Cambridge).
12. Beckwith, S. W. and Hyland, C. R. Resin transfer molding: a decade of technology advances. SAMPE J. 1998, 34(6), 7-19.
13. Kruckenberg, T. M. and Paton, R. (eds). Resin Transfer Moulding for Aerospace Structures, 1998 (Kluwer Academic, Dordrecht).
14. Parnas, R. S. Liquid Composite Moulding, 2000 (Hanser Gardner, Munich).
15. Advani, S. Liquid impregnation techniques. In Comprehensive Composite Materials Encyclopædia, Volume 2: Polymer Matrix Composites (Ed. R. Talreja and J.-A. Månson), 2000, pp. 807-844 (Elsevier, Oxford).
16. Williams, C. D., Grove, S. M., and Summerscales, J. Resin infusion under flexible tooling (RIFT): a review. Composites Pt A: Appl. Sci. Manuf., 1996, A27(7), 517-524.
17. Abraham, D. and McIlhagger, R. A review of liquid injection techniques for the manufacture of aerospace composite structures, Polym. Polym. Compos, 1996, 4(6), 437-444.
18. Cripps, D., Searle, T. J., and Summerscales, J. Open mould techniques for thermoset composites. In Comprehensive Composite Materials Encyclopædia, Volume 2: Polymer Matrix Composites (Eds. R. Talreja, and J.-A. Månson), 2000, pp. 737-761 (Elsevier, Oxford).
19. Peters, S. T., Humphrey, W. D., and Foral, R. F., Filament Winding Composite Structure Fabrication, 1991 (SAMPE, Covina, CA).
20. Meyer, R. W. Handbook of Pultrusion Technology, 1985 (Chapman and Hall, London).
21. Starr, T. F. Pultrusion for Engineers, 2000 (Woodhead, Cambridge).
22. Muskat, I. E. Method of molding, United States Patent Application 598 339, 8 June 1945 (United States Patent 2 495 640, 24 January 1950).
23. Coniff, D. Closed mould processes - why use them? Reinforced Plast., 1999, 43(2), 32-34.
24. Cooper, M. G. Closed mould processing in the marine industry. In Proceedings of the Conference on Marine Composites, 11-12 September 2003, pp. 11-16, ACMC/SAMPE, Plymouth.
25. VM. www.plastech.co.uk/vm.htm, accessed 5 May 2004.
26. RTM Light (vacuum molding), www.rtmcomposites. com/rtm_rtmlight.html, accessed 5 May 2004.
27. Becker, D. W. Tooling for Resin Transfer Moulding (Wichita State University, Wichita, KS).
28. Pearce, N. R. L., Guild, F. J., and Summerscales, J. An investigation into the effects of fabric architecture on the processing and properties of fibre reinforced composites produced by resin transfer moulding. Composites Pt A: Appl. Sci. Manuf., 1998, A29(1), 19-27.
29. Stringer, L. G. Optimization of the wet lay-up/vacuum bag process for the fabrication of carbon fibre epoxy composites with high fibre volume fraction and low void content. Composites, 1989, 20(5), 441-452.
30. Lundström, T. S., Gebart, B. R., and Lundemo, C. Y. Void formation in RTM. J. Reinf. Plast. Composites, 1993, 12, 1339-1349.
31. Williams, C. D., Grove, S. M., and Summerscales, J. Compressive response of fibre reinforced plastics plates during manufacture by resin infusion under flexible tooling method. Composites Pt A: Appl. Sci. Manuf., 1998, A29(1/2), 111-114.
32. Basford, D. M., Griffin, P. R., Grove, S. M., and Summerscales, J. Research report: the relationship between mechanical performance and microstructure in composites fabricated with flow-enhancing fabrics. Composites, 1995, 26(9), 675-679.
33. Pearce, N. R. L., Guild, F. J., and Summerscales, J. The use of automated image analysis for the investigation of fabric architecture on the processing and properties of fibre-reinforced composites produced by RTM. Composites Pt A: Appl. Sci. Manuf., 1998, A29(7), 829-837.
34. Pearce, N. R. L., Summerscales, J., and Guild, F. J. Improving the resin transfer process for fabric reinforced composites by modification of the fabric architecture. Composites Pt A: Appl. Sci. Manuf., 2000, A31(12), 1433-1441.
35. Andersson, H. M., Lundström, T. S., Gebart, B. R., and Långström, R. Flow-enhancing layers in the vacuum infusion process, Polym. Composites, 2002, 23(5), 895-901.
36. Arney, M. W., Grove, S. M., Progoulakis, I., Searle, T. J., Short, D., Spooner, J., and Summerscales, J. Integrally-heated tooling for the manufacture of fibre-reinforced composites. In Composites Processing 2004 Conference, 23 April 2004 (Composites Processing Association, Bromsgrove).
37. VM Plastech www.plastech.co.uk/news/vm.htm, accessed 7 April 1999.
38. Moore, M. F. and Bland, R. J. RTM equipment and process automation. SAMPE J. 1999, 35(2), 39-46. [Reprinted in Benjamin, W.P. and Beckwith, S.W. (eds), Resin Transfer Molding, SAMPE Monograph no. 3, 1999, pp. 33-40 (SAMPE, Covina, CA).]
39. Moore, M. F. and Bland, R. J. RTM equipment and process automation. SAMPE J. 1999, 35(2), 39-46. [Reprinted in Benjamin, W.P. and Beckwith, S.W. (eds), Resin Transfer Molding, SAMPE Monograph no. 3, 1999, pp. 33-40 (SAMPE, Covina, CA).]
40. Bernstein, J. R. and Wagner, J. W. Fiber optic sensors for use in monitoring flow front in vacuum resin transfer molding processes. Rev. Sci. Instrum., 1997, 68(5), 2156-2157.
41. Senturia, S. D. and Sheppard, N. F. Dielectric analysis of thermoset cure, Adv. Polym. Sci., 1986, 80, 1-47.
42. Summerscales, J. Dielectrometry: monitoring cure. In Non-destructive Testing of Fibre-Reinforced Plastics Composites, Vol. 2 (Ed. J. Summerscales), 1990, pp. 335-347 (Elsevier, Barking).
43. Parnas, R. S., Keuh, S. R. M., and Advani, S. G. A minimalist sensor system for mould filling. In 12th International Conference on Composite Materials (ICCM-12), Paris, July 1999, Extended Abstracts, p. 758.
44. Summerscales, J. In-process monitoring for control of closed-mold techniques for the manufacture of thermosetting matrix composites. In Advanced Polymeric Materials - Structure and Property Relationships (Ed. G. O. Shonaike and S. G. Advani), 2003, pp. 57-101 (CRC Press LLC, Boca Raton, FL).
45. Summerscales, J. A comparison of hand-lamination and resin infusion manufacturing processes. In La Vitrine de la Voile, Paris, November 1998.
46. The SCRIMP™ advantage, www.tpicomp.com/technology/ advantage.htm, accessed 4 May 2004.
47. TPI Technology, Inc. An overview of the SCRIMP™ technology, 2001. www.tpicomp.com/scrimp%20_overview%20.pdf, accessed 4 May 2004.
48. Hoebergen, A., van Herpt, E., and Labordus, M. The manufacture of large parts using the vacuum injection technique: practical injection strategies for boatbuilding used in the manufacture of the Contest 55. In 20th Jubilee International Conference, 13-15 April 1999 (SAMPE Europe, Paris).
49. Soric. www.baltek.com/products/bulkermats/soric.html, accessed 6 May 2004.
50. Weaver, A. Technology and acquisition drive Ashland's growth. Reinf. Plast. 1998, 42(10), 22-24.
51. Kruckenberg, T., Qi, B., Falzon, P., Liu, X. L., and Paton, R. Experimental and predicted in-plane flow height measurements for stiffened structures made using the resin film infusion process. SAMPE J., 2001, 37(3), 28-34.
52. Uchida, H., Yamamoto, T., and Takashima, H. Development of low-cost damage-resistant composites using RFI processing. SAMPE J. 2001, 37(6), 16-20.
53. Fiedler, L., Barré, S., Molina, J. I., and Voto, C. TANGO composite fuselage platform. SAMPE J., 2003, 39(1), 57-63.
54. Manufacture of structural composite components using ZPREG™ technology, Advanced Composites Group technical data sheet TDS1008/02.03/1, 2003.
55. Manufacture of composite tools using ZPREG™ technology, Advanced Composites Group technical data sheet TDS1020/07.03/P, 2004.
56. Cytec Engineered Materials. www.cytec.com/business/ EngineeredMaterials/ index.shtm, accessed 2 May 2004.
57. SPRINT®, www.spsystems.com/solutions/sprint.htm, accessed 1 May 2004.
58. Frost, M., Solanki, D., and Mills, A. Resin film infusion process of carbon fibre composite automotive body panels. SAMPE J. 2003, 39(4), 44-49.
59. CIRTM (Co-Injection Resin Transfer Moulding). www.ccm.udel.edu/Info/ Techbriefs/107.html, accessed 16 March 1998.
60. Channer, K. J., Cosgriff, W., and Smith, G.F., DRDF (double RIFT diaphragm forming) volume automotive manufacture of structural composites. In Sixth International Conference on Automated Composites, 23-24 September 1999, pp. 273-279 (Institute of Materials, Bristol).
61. Lazarus, P. Infusion. Professional Boatbuilder, 1995, 28-34.
62. Griffiths, B. and Noble, N. Process and tooling for low cost, rapid curing of composite structures. SAMPE J., 2004, 40(1), 41-46.
63. Baig, B. S. and Gibson, R. F. Vibration assisted liquid composite moulding. In Proceedings 11th Annual Advanced Composites Conference, November 1995, p. 645 (Engineering Society of Detroit, Dearborn, MI).
64. Song, F. and Ayorinde, E. O. Model development in the simulation of vibration assisted liquid composite moulding. In Proceedings 11th Annual Advanced Composites Conference, November 1995, 203-212 (Engineering Society of Detroit, Dearborn, MI).
65. Pantelelis, N. G. Evaluation of the vibration assisted RTM technique in the production of real parts. In 7th International Conference on Flow Processes in Composite Materials, 7-9 July 2004, pp. 151-156, preprints (University of Delaware, Newark, DE).
66. Barnes, F. and Galbraith, D. The development of process methods for in situ composite reinforcement of existing structures. In 16th International Conference, May-June 1995, pp. 293-304 (SAMPE Europe, Salzburg).
67. Control of Substances Hazardous to Health, COSHH. www.hse.gov.uk/coshh/ index.htm, accessed 26 October 2004.
68. Pollution Prevention and Control Act 1999. www.hmso.gov.uk/acts/acts1999/ 19990024.htm, accessed 26 October 2004.
69. Froud, C. Terminodour - cost effective styrene abatement. In Composites Processing 2004, 23 April 2004 (Composites Processing Association, Bromsgrove).
70. Darby, P. Styrene abatement and styrene alternatives. In Composites Processing 2004, 23 April 2004 (Composites Processing Association, Bromsgrove).
71. Chapman, A. C. B. Vacuum moulding patent. GB Patent 1432 333, 30 March 1972.
72. Adams, A. A. and Roberts, J. H. A general outline of the main characteristics and prime uses of a vacuum injection moulding system. In Conference: Hands Off GRP II, May 1985, pp. 5/1-5/3 (Plastics and Rubber Institute, Coventry).
73. Gotch, T. M. Improved production process for manufacture of GRP on British Rail. In 11th Reinforced Plastics Congress, November 1978, paper 4, pp. 33-39 (British Plastics Federation Brighton).
74. Gotch, T. M. Developments and potential of vacuum impregnation techniques for GRP manufacture. In 12th Reinforced Plastics Congress, November 1980, paper 7, pp. 25-31 (British Plastics Federation, Brighton).
75. Gotch, T. M. Low investment alternatives to hand lay GRP production. In Conference: Hands Off GRP II, May 1985, pp. 1/1-1/11 (Plastics and Rubber Institute, Coventry).
76. le Comte, A. Method and apparatus for producing a thin walled article of synthetic resin, in particular a large sized vehicle, US Patent 4359 437, 16 November 1982.
77. McCarthy, R. F. J. Fifteen years experience with composite propeller blades. In 1st International Conference, January 1981 (SAMPE Europe, Cannes).
78. McCarthy, R. F. J. Manufacture of accurate carbon and glass preforms in resin injection. In 5th International Conference, June 1984 (SAMPE Europe, Montreux).
79. Allen, R., Best, P. F., and Short, D. Vacuum injection moulding of high fibre volume fraction fibre reinforced composites. In 13th Reinforced Plastics Congress, November 1982, paper 49, pp. 207-209 (British Plastics Federation, Brighton).
80. Bacon, D. H., Gurtan, A. A., and Short, D. Changes in resin flow whilst moulding FRP. In 14th Reinforced Plastics Congress, November 1984, paper 16, pp. 67-69 (British Plastics Federation, Brighton).
81. Gurtan, A. A., Richards, T., Short, D., and Stringer, G. Fabrication of high volume fraction fibre-reinforced thermosets. In 1st International Conference on Polymers in Defence, March 1987, paper 11 (Plastics and Rubber Institute, Bristol).
82. Injection moulding for large craft, Ship Boat Int., lanuary/February 1986, 43-44.
83. Solid skirts for smoother sailing, Ship Boat Int., lanuary/February 1986, 25-26.
84. Weaver, A. Composites drive VT diversification. Reinf. Plast., 1997, 41(1), 28-31.
85. New composite technology debuts on HMS Penzance, Reinf. Plast., May 1997, 42(5), 7.
86. VT increases use of SCRIMP in minehunters. Reinf. Plast., 1998, 42(2), 4.
87. Reinforced plastics in bulk in latest minehunter. Reinf. Plast., 1998, 42(4), 8.
88. Shipbuilder increases use of SCRIMP. Reinf. Plast., 1998, 42(9), 10.
89. Hoebergen, A. The practical application of the vacuum injection technique in boatbuilding: the injection of the hull of the Contest 55. In 15th International Symposium on Yacht Design and Yacht Construction, Amsterdam, 16 November 1998.
90. Leenders, W. S., Marissen, R., van den Drift, L., and Boon, B. Special problems due to vacuum injection moulding of large ship structures. In Proceeding 5th International Conference on Flow Processes in Composite Materials, 12-14 July 1999, pp. 329-336 (ACMC, Plymouth).
91. Leenders, W. S. Application of fibre-reinforced plastics in a large removable bulkhead on board of a ship. In Proceedings of the Conference on Marine Composites, 11-12 September 2003, pp. 175-188 (ACMC/ SAMPE, Plymouth).
92. Lindblom, F. Use of composites in the Visby-class stealth corvette. In Proceedings of the Conference on Marine Composites, 11-12 September 2003, pp. 203-208 (ACMC/SAMPE, Plymouth).
93. Searle, T., Spooner, J., Grove, S., Cullen, R., Davy, S., Hancock, M., and Clark, K. Manufacture of large composite structures by vacuum resin infusion. In Proceedings 24th International SAMPE Europe, Conference, Paris, 1-3 April 2003, pp. 113-120, Paris.
94. Pittman, F. A better boat, a greener boatworks. Sail, August 1993, 27-29.
95. Thomas, S. One day, all plastic boats may be made like this ..., Waterline (RWYC), Autumn 1998, 8-11.
96. J/120. http://jboats.com/j120/, accessed 4 May 2004.
97. J/120 SCRIMP construction, http://jboats.com/j120/html/j120scrimp.htm, accessed 4 May 2004.
98. J/133. http://jboats.com/j133/, accessed 4 May 2004.
99. J/133 SCRIMP construction, http://jboats.com/j133/j133scrimp.htm, accessed 4 May 2004.
100. J/145. http://jboats.com/j145/, accessed 4 May 2004.
101. J/145 introduction, http://jboats.com/j145/html/j145intro.htm, accessed 4 May 2004.
102. J/160. http://jboats.com/j160/, accessed 4 May 2004.
103. J/160 SCRIMP construction, http://jboats.com/j160/j160scrimp.htm, accessed 4 May 2004.
104. Lazarus, P. Reporting from the resin infusion front 1. Professional BoatBuilder, 1997, 30-35.
105. Anonymous, Over the long haul. DuPont Mag., January/February 1996.
106. Dawson, D. K. High glass delivery. Composites Technol., 1999, 5(4), 31-35.
107. Weinhold, P. D. and Wozniak, J. J. The application of SCRIMP VARTM fabrication technology to the compressed natural gas integrated storage system. SAMPE J., 1998, 34(1), 5-10.
108. French, M. A. ACAVP - demonstrating the potential use of composite materials for future AFVs. In 4th European Advanced Fighting Vehicles Symposium, RMCS Shrivenham, 9-11 February 1999.
109. Kelkar, A.D. and Vaidya, U. Low cost manufacturing of composite integral armour using resin transfer moulding and resin infusion moulding processes. In 5th International Conference on Flow Processes in Composite Materials, 12-14 July 1999 (ACMC, Plymouth).
110. Marsh, G. Composites - prime enabler for wind energy. Reinf. Plast., 2003, 47(5), 29-45.
111. Recent projects, www.tech.plymouth.ac.uk/sme/acmc/consultancy.htm, accessed 5 May 2004.
112. Barnes, F. J. Composite reinforcement of steel structural sections. In Seminar: Composite Materials for Offshore Use, 17 November 1994, BLDSC q95/06701 (IMechE).
113. Marsh, G. Putting SCRIMP in context. Reinf. Plast., 1997, 41(1), 22-26.
114. Moriarty, J. and Barnes, F. The use of carbon fibre composites in the London Underground Limited civil infrastructure rehabilitation programme. SAMPE J., 1998, 34(2), 23-28.
115. Barnes, F. The development and validation of composite structures for infrastructure rehabilitation. In 20th Jubilee International Conference, 13-15 April 1999 (SAMPE Europe, Paris).
116. Anonymous. Scrimping saves money and time. Compos. Technol., 1999, 5(5), 21-28.
117. Hammami, A. and Gebart, B. R. A model for the vacuum infusion moulding process. In Proceedings of 7th International Conference on Fibre-Reinforced Composites, Newcastle-upon-Tyne, April 1998, pp. 136-145 (Woodhead, Cambridge).
118. Sun, X., Li, S., and Lee, L. J. Mold filling analysis in vacuum-assisted resin transfer moulding. Part I: SCRIMP based on a high-permeable medium. Polym. Composites, 1998, 19(6), 807-817.
119. Ni, J., Li, S., Sun, X., and Lee, L. J. Mold filling analysis in vacuum-assisted resin transfer moulding. Part II: SCRIMP based on grooves. Polym. Composites, 1998, 19(6), 818-829.
120. Han, K., Jiang, S., Zhang, C., and Wang, B. Flow modelling and simulation of SCRIMP for composites manufacturing. Composites Pt A: Appl. Sci. Manuf., 2000, A31(1), 79-86.