The development of residual stresses in Ti6Al4V-Al3Ti metal-intermetallic laminate (MIL) composites

Materials Science and Engineering: A

Volumn 473, Issue 1-2, 2008, Pages 49-57

  Li, Tiezheng ^a,b   Olevsky, Eugene Al ^b   Meyers, Marc André ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b AGC Paul S Roel Chair in Construction Engineering and Management   (United States)

Author keywords

Crack propagation; Creep; Finite element simulation; Laminate composites; Residual stress; Thermal expansion

Indexed keywords

COMPUTER SIMULATION; CRACK PROPAGATION; CREEP; FINITE ELEMENT METHOD; INTERMETALLICS; LAMINATED COMPOSITES; RESIDUAL STRESSES; TEMPERATURE; THERMAL EXPANSION; X RAY DIFFRACTION ANALYSIS;

ANALYTICAL MODELING; J-INTEGRAL; METAL-INTERMETALLIC LAMINATE (MIL) COMPOSITES;

TITANIUM ALLOYS;

COMPUTER SIMULATION; CRACK PROPAGATION; CREEP; FINITE ELEMENT METHOD; INTERMETALLICS; LAMINATED COMPOSITES; RESIDUAL STRESSES; TEMPERATURE; THERMAL EXPANSION; TITANIUM ALLOYS; X RAY DIFFRACTION ANALYSIS;

EID: 37449014322     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2007.03.069     Document Type: Article

References (50)

1. Clyne T.W., and Withers P.J. An Introduction to Metal Matrix Composites (1993), Cambridge University Press, Cambridge, UK
2. Ward-Close C.M., Minor R., and Doorbar P.J. Intermetallics 4 (1996) 217-229
3. Solti J.P., Robertson D.D., and Mall S. Compos. Sci. Technol. 54 1 (1995) 55-66
4. Bednarcyk B.A., and Arnold S.M. Int. J. Solids Struct. 39 7 (2002) 1987-2017
5. Wisnom M.R., and Li D.S. Compos. Sci. Technol. 51 4 (1994) 545-563
6. Nimmer R.P., Bankert R.J., Russell E.S., Smith G.A., and Wright P.K. J. Comp. Technol. Res. 13 1 (1991) 3-13
7. Aghdam M.M., Smith D.J., and Pavier M.J. J. Mech. Phys. Solids 48 3 (2000) 499-528
8. Foringer M.A., Robertson D.D., and Mall S. Composites B 28 5/6 (1997) 507-521
9. Ismar H., Schroter F., and Streicher F. Compos. Struct. 79 18 (2001) 1713-1722
10. Iyer S.K., Lissenden C.J., and Arnold S.M. Composites B 31 4 (2000) 327-343
11. Lissenden C.J. Composites B 30 (1999) 267-278
12. Herakovich C.T., Aboudi J., Lee S.W., and Strauss E.A. Mech. Mater. 7 2 (1988) 91-107
13. Trende A., Astrom B.T., and Nilsson G. Composites A 31 11 (2000) 1241-1254
14. Robertson D.D., and Mall S. Compos. Sci. Tech. 52 3 (1994) 319-331
15. Buchmann M., Gadow R., and Tabellion J. Mater. Sci. Eng. A 288 2 (2000) 154-159
16. Sarkani S., Tritchkov V., and Michaelov G. Finite Elements Anal. Des. 35 3 (2000) 247-268
17. Hsueh C.-H., and Fuller E.R. Mater. Sci. Eng. A 283 1/2 (2000) 46-55
18. Zhang X.C., Xu B.S., Wang H.D., and Wu Y.X. Mater. Des. 27 4 (2006) 308-315
19. Ghafouri-Azar R., Mostaghimi J., and Chandra S. Comput. Mater. Sci. 35 1 (2006) 13-26
20. Outeiro J.C., Umbrello D., and M'Saoubi R. Int. J. Mach. Tools Manuf. 46 14 (2006) 1786-1794
21. Zhang X.C., Xu B.S., Wang H.D., Jiang Y., and Wu Y.X. Compos. Sci. Tech. 66 13 (2006) 2249-2256
22. Zhang X.C., Xu B.S., Wang H.D., Jiang Y., and Wu Y.X. Thin Solid Films 497 1/2 (2006) 223-231
23. Laukkanen A., Holmberg K., Koskinen J., Ronkainen H., Wallin K., and Varjus S. Surf. Coat Technol. 200 12/13 (2006) 3824-3844
24. Robertson D.D., and Mall S. Compos. Sci. Tech. 50 4 (1994) 483-496
25. Teixeira-Dias F., and Menezes L.F. Comput. Mater. Sci. 21 (2001) 26-36
26. Cannillo V., Montorsi M., Siligardi C., Sola A., de Portu G., Micele L., and Pezzotti G. J. Euro. Ceram. Soc. 26 8 (2006) 1411-1419
27. Ee K.C., Dillon Jr. O.W., and Jawahir I.S. Int. J. Mech. Sci. 47 10 (2005) 1611-1628
28. Aghdam M.M., and Falahatgar S.R. Compos. Struct. 66 (2004) 415-420
29. Surry M., Teodosiu C., and Menezes L.F. Mater. Sci. Eng. A 167 1/2 (1993) 97-105
30. Sayman O. Composites B 36 (2005) 61-72
31. Hsueh C.-H., and Ferber M.K. Composites A 33 (2002) 1115-1121
32. Li T., Grignon F., Benson D.J., Vecchio K.S., Olevsky E.A., Jiang F.C., and Meyers M.A. Mater. Sci. Eng. A A374 (2004) 10-26
33. Li T., Jiang F.C., Vecchio K.S., Olevsky E.A., and Meyers M.A. Mater. Sci. Eng. A A443 (2007) 1-15
34. Rohatgi A., Harach D.J., Vecchio K.S., and Harvey K.P. Acta. Mater. 51 10 (2003) 2933-2957
35. Rawers J.C., and Maupin H.E. J. Mater. Sci. Lett. 12 (1993) 637-639
36. Rawers J.C., Alman D.E., and Hawk J.A. Int. J. Self-Prop. High Temp. Syn. 2 1 (1993) 12-24
37. Rawers J.C., Hansen J.S., Alman D.E., and Hawk J.A. J. Mater. Sci. Lett. 13 (1994) 1357-1360
38. Alman D.E., Rawers J.C., and Hawk J.A. Metall. Mater. Trans. A 26A (1995) 589-599
39. Alman D.E., Dogan C.P., Hawk J.A., and Rawers J.C. Mater. Sci. Eng. A192-A193 (1995) 624-632
40. Alman D.E., Hawk J.A., Petty A.V., and Rawers J.C. JOM 46 3 (1994) 31-35
41. Rawers J.C., and Alman D.E. Comp. Sci. Technol. 54 (1995) 379-384
42. Harach D.J., and Vecchio K.S. Metall. Mater. Trans. A 32A (2001) 1493-1505
43. Vecchio K.S. JOM 57 3 (2005) 25-29
44. K.P. Harvey, Measurement of Constraint and Residual Stress in Titanium Layers Within Metal-Intermetallic Laminate Composites, M.S. Thesis, UC San Diego, 2005, pp. 129-133.
45. Lakshminarayanan R., Shetty D.K., and Cutler R.A. J. Am. Ceram. Soc. 79 1 (1996) 79-87
46. Donachie M.J. Titanium and Titanium Alloys (1982), American Society for Metals
47. Whittenberger J.D., Kumar K.S., DiPietro M.S., and Brown S.A. Intermetallics 3 (1995) 221-232
48. Salganik R.L. Izv. Akad. Nauk. SSR Mekh. Tverd. Tela. 8 (1973) 149-158
49. Griffith A.A. Philos. Trans. R. Soc. A221 (1921) 163-198
50. Laszlo F. J. Iron St. Inst. 148 (1943) 137-159