Measurement of residual stress distributions by energy dispersive X-ray diffraction synchrotron radiation

Proceedings of the International Offshore and Polar Engineering Conference

Volumn , Issue , 2006, Pages 57-64

  Tsakalakos, Thomas ^a   Croft, Mark C ^b   Jisrawi, Najeh M ^a,b   Holtz, Ronald L ^c   Zhong, Zhong ^d  

^a Piscataway   (United States)

^b RUTGERS UNIVERSITY   (United States)

^c NAVAL RESEARCH LABORATORY   (United States)

^d BROOKHAVEN NATIONAL LABORATORY   (United States)

Author keywords

EDXRD; Fatigue; Laser peening; Residual stress; Shot peening; Synchrotron; Weldments

Indexed keywords

FATIGUE OF MATERIALS; MEASUREMENT THEORY; SHOT PEENING; STRESS CONCENTRATION; SYNCHROTRON RADIATION; X RAY DIFFRACTION ANALYSIS;

LASER PEENING; STRAIN MAPPING; WELDMENTS;

RESIDUAL STRESSES;

EID: 36749007121     PISSN: 10986189     EISSN: 15551792     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (27)

1. Al-Hassani, STS (1982). "Mechanical Aspects of Residual Stress Development in Shot Peening," 1st Int. Conf. On Shot Peening, Paris, Pergamon Press Oxford, New York, pp 583 - 602
2. Allison, JE (1979). "Measurement of crack-tip stress distributions by X-ray diffraction, " Fracture mechanics, Proceedings of the Eleventh National Symposium, Blacksburg, VA, pp. 550-562
3. Bao, H, and McEvily, AJ (1998). "On plane stress - plane strain interactions in fatigue crack growth, " Int J Fatigue, Vol 20, pp 441-448
4. Croft, M, Zakharchenko, I, Zhong, Z, Gulak, Y, Hastings, J, Hu, J, Holtz, RL, DaSilva, M, and Tsakalakos, T (2002). "Strain Field and Scattered Intensity Profiling with Energy Dispersive X-Ray Scattering, " J App. Phys., Vol 92, pp 578-586
5. Croft, M, Zhong, Z, Jisrawic, N, Zakharchenko, I, Holtz, RL, Skaritka, J, Fast, T, Sadananda, K, Lakshmipathye, M, and Tsakalakos, T (2005). "Strain profiling of fatigue crack overload effects using energy dispersive X-ray diffraction," International Journal of Fatigue, Vol 27, pp 1408-1419
6. Deslaef, D, Rouhaud, E, and Rasouli-Yazdi, S (2000). "3D Finite Element Models of Shot Peening Processes," Fifth European Conference on Residual Stresses, Trans Tech Publications, Materials Science Forum, Vol 347-349, pp 241-246
7. James, M, Hattingh, D, Hughes, D, Wei, LW, Patterson, E, and Quinta Da Fonseca, J (2004). "Synchrotron diffraction investigation of the distribution and influence of residual stresses in fatigue," Fat & Fract. Engng. Mater. & Structures, Vol 27, No 7, pp 609-622.
8. Kandil, FA, Lord, JD, Fry AT, and Grant, PV (2001). "A Review of Residual Stress Measurement Methods - A Guide to Technique Selection," NPL Report No. MATC (A) 04, National Physical Laboratory, Teddington, Middlesex, UK, TW11 0LW
9. Kuntz, T, Wadley, H, and Black, D (1993). "Residual strain gradient determination in metal-matrix composites by synchrotron x-ray energy dispersive diffraction," Metall Trans A, Vol 24, No. 5, pp 1117-24.
10. Lang M, and Marci, G (1999). "The influence of single and multiple overloads on fatigue crack propagation, " Fatigue & Fracture of Engineering Materials & Structures, Vol 22, No 4, pp. 257-271
11. Leggatt, R, Smith, D, Smith, S, and Faure, F (1996). "Development and experimental validation of the deep hole method for residual stress measurement," J Strain Anal, Eng. Des., Vol 31, No 3, pp 177-186
12. Makabe, C, Purnowidodo, A, and McEvily, AJ, (2004). "Effects of surface deformation and crack closure on fatigue crack propagation after overloading and underloading," Int. J Fatigue, Vol 26, No 12, pp 1341-1438
13. Noroozi, AH, Glinka, G, and Lambert, S (2005). "A two parameter driving force for fatigue crack growth analysis," Int. J Fatigue, Vol 27, pp 1277-1296
14. Prime, M, (1999). "Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method," Appl. Mech. Rev., Vol 52, No 2, pp. 75-96.
15. Pyzalla, A (2000). "Methods and Feasibility of Residual Stress Analysis by High-Energy Synchrotron Radiation in Transmission Geometry Using a White Beam," Journal of Nondestructive Evaluation, Vol 19, No 1, pp 21-31
16. Ramos, M, Pereira, M, Dawish, F, Motta, S, and Carneir, M (2003). "Effect of single and multiple overloading on the residual fatigue life of a structural steel," Fatigue & Fracture of Engineering Materials & Structures, Vol 26, No 2, pp 115-125
17. Sadananda, K, Vasudevan, AK, Holtz, RL, and Lee, EU (1999). "Analysis of overload effects and related phenomena," International Journal of Fatigue, Vol 21, pp S233-S246.
18. Skorupa, M (1998). "Load interaction effects during fatigue crack growth under variable amplitude loading - a literature review. Part I: Empirical Trents," Fat. Fract. Eng. Mat. Struct, Vol 21, No 8, pp. 987-1006
19. Skorupa, M (1999). "Load interaction effects during fatigue crack growth under variable amplitude loading - a literature review. Part II: qualitative interpretation," Fat. Fract. Eng. Mat. Struct., Vol 22, No 10, pp 905-926
20. Steuwer, A, Santistebban, J, Withers, and Buslap, T (2004). "High-resolution strain mapping in bulk samples using full-profile analysis of energy dispersive synchrotron X-ray diffraction data," J Appl. Cryst., Vol 37, No 6, pp 883-889
21. Stoychev, S, and Kujawski, D (2005). "Analysis of crack propagation using AK and Kmax, " International Journal of Fatigue Vol 27, pp 1425-1431
22. Suresh, S (1998). Fatigue of Materials, Cambridge University Press, NY, pp. 305-306.
23. Tsakalakos, T, Croft, M, Zakharchenko, I, Zhong, Z, Gulak, Y, and Holtz, RL (2002). "On the Stability of Nano structured Coatings by Synchrotron Radiation," AIAA-2002-1314, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, pp 1-10
24. Vasudevan, AK, Sadananda, K, and Louat, N (1994). "A review of crack closure, fatigue-crack threshold and related phenomena," Mat. Sei. Eng. A, Vol 188, No 1-2, pp 1-22
25. Verma B, and Ray, PK, (2002). "Fatigue crack growth retardation in spot heated mild steel sheet," Bull. Mater. Sci., Vol 25, No 4, pp. 301-307.
26. Wang, H, Buchholz, F-G, Richard, HA, Jaag, S, and Scholtes, B (1999). "Numerical and experimental analysis of residual stresses for fatigue crack growth, " Computational Materials Science," Vol 16, No 1-4, pp 104-112
27. Withers, P, and Bhadeshia, H (2001). "Residual stress. Part 1 Measurement techniques, " Materials Science and Technology, Vol 17, No 4, pp. 355-365