Fatigue of highly strengthened Cu-Ag alloys

International Journal of Fatigue

Volumn 30, Issue 3, 2008, Pages 437-443

  Freudenberger, J ^a,b   Klauss H J ^a,b   Heinze, K ^a,b,c   Gaganov, A ^a,b,c   Schaper, M ^c   Schultz, L ^a,b,c  

^a IFW DRESDEN   (Germany)

^b INSTITUTE OF ION BEAM PHYSICS AND MATERIALS RESEARCH   (Germany)

^c DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Cu Ag alloys; Fatigue; High strength conductors; Mechanical properties

Indexed keywords

COPPER ALLOYS; FAILURE ANALYSIS; HEAT TREATMENT; MAGNETIC FIELDS; MAGNETS; SILVER ALLOYS;

CONDUCTOR MATERIALS; HEAVY COLD FORMING; HIGH STRENGTH CONDUCTORS; STRESS AMPLITUDES;

FATIGUE OF MATERIALS;

EID: 36549067691     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2007.04.009     Document Type: Article

References (42)

1. Herlach F. Magnets for the 21st century. Physica B 246-247 (1998) 152-157
2. Herrmannsdoerfer T., Krug H., Pobell F., Zherlitsyn S., Eschrig H., Freudenberger J., et al. The high field project at Dresden/Rossendorf: a pulsed 100 T/10 ms laboratory at an infrared free-electron-laser facility. J Low Temp Phys 133 1-2 (2003) 41-59
3. Jones H, Herrmannsdoerfer T, Joss W, Kindo K, Shneerson G, Schneider-Muntau H-J, et al. The stony path to 100 t, non-destructive, results! In: von Ortenberg M, editor. X international conference on megagauss magnetic field generation and related topics. HU Berlin, 2004. http://megagaussx.physik.hu-berlin.de/fless/Proceedings/proc.html.
4. Swenson C., Marshall W., Miller E., Pickard K., Gavrilin A., Han K., et al. Pulse magnet development program at NHMFL. IEEE Trans Appl Supercond 14 2 (2004) 1233-1236
5. Jones H., Frings P.H., von Ortenberg M., Lagutin A., Van Bockstal L., Portugall O., et al. First experiments in fields above 75 T in the European 'coilin-coilex' magnet. Physica B 346-347 (2004) 553-560
6. Portugall O. The LNCMP: a pulsed-field user-facility in Toulouse. Physica B 346 (2004) 668-672
7. Bacon J., Ammerman C., Coe H., Ellis G., Lesch B., Sims J., et al. The US NHMFL 100 Tesla multi-shot magnet. IEEE Trans Appl Supercond 12 1 (2002) 695-698
8. Swenson C., Marshall W., Gavrilin A., Han K., Schillig J., Sims J., et al. Progress of the insert coil for the US-NHMFL 100 T multi-shot pulse magnet. Physica B 346 (2004) 561-565
9. Jones H., Herlach F., Lee J., Whitworth H., Day A., Jeffrey D., et al. 50 Tesla pulsed magnets using a copper conductor externally reinforced with stainless steel. IEEE 24 2 (1988) 1055-1058
10. Asano T., Sakai Y., Oshikiri M., Inoue K., Maeda H., Heremans G., et al. Cu-Ag wire pulsed magnets with and without internal reinforcements. IEEE 30 4 (1994) 2106-2109
11. Herlach F., Li L., Harrison N., VanBockstal L., Louis J., Frings P., et al. Approaching 100 T with wire wound coils. IEEE Trans Magn 32 4 (1996) 2507-2510
12. Rosseel K., Herlach F., Boon W., and Bruynseraede Y. Zylon-reinforced high magnetic field coils for the K.U.Leuven pulsed field laboratory. Physica B 294-295 (2001) 657-660
13. Rosseel K., Herlach F., Boon W., and Bruynseraede Y. Multi-composite wires for pulsed field coils. Physica B 294-295 (2001) 679-683
14. Schneider-Muntau H., Han K., Bednar N., Swenson C., and Walsh R. Materials for 100 T monocoil magnets. IEEE Trans Appl Supercond 14 2 (2004) 1153-1156
15. Eyssa Y., Wise P., Schneider-Muntau H., VanCleemput M., and Jones H. Comparative analysis of micro-composite and macro-composite conductors for pulse magnets. IEEE Trans Magn 32 4 (1996) 2462-2465
16. Freudenberger J., Grünberger W., Botcharova E., Gaganov A., and Schultz L. Mechanical properties of Cu-based Micro- and Macrocomposites. Adv Eng Mater 4 9 (2002) 677-681
17. Thilly L., Lecouturier F., Coffe G., Peyrade J., and Askenazy S. Ultra high strength nanocomposite conductors for pulsed magnet windings. IEEE Trans Appl Supercond 10 1 (2000) 1269-1272
18. Thilly L., Lecouturier F., Veron M., Snoeck E., Peyrade J., and Askenazy S. Optimization of high strength materials: design of the engineering parameters through the nanostructure characterization. J Phys IV 11 PR4 (2001) 33-40
19. Freudenberger J., Gaganov A., Hickman A., and Jones H. Mechanical behaviour of high nitrogen stainless steel reinforced conductor for use in pulsed high field magnets at cryogenic temperature. Cryogenics 43 (2003) 133-136
20. Lecouturier F., Spencer K., Thilly L., and Embury J. Perspectives for Cu/SS macrocomposite and Cu/X nanofilamentary conductors used in non-destructive high-field pulsed magnets under cryogenic conditions. Physica B 346 (2004) 582-588
21. Spencer K., Lecouturier F., Thilly L., and Embury J. Established and emerging materials for use as high-field magnet conductors. Adv Eng Mater 6 5 (2004) 290-297
22. Gaganov A., Freudenberger J., Grünberger W., and Schultz L. Microstructural evolution and its effect on the mechanical properties of Cu-Ag microcomposites. Z Metallkde 95 6 (2004) 425-432
23. Jones H., Van Cleemput M., Hickman A., Ryan D., and Saleh P. Progress in high-field pulsed magnets and conductor development in Oxford. Physica B 246 (1998) 337-340
24. Gaganov A., Freudenberger J., Botcharova E., and Schultz L. Effect of Zr additions on the microstructure, and the mechanical and electrical properties of Cu-7 wt.% Ag alloys. Mat Sci Eng A 437 (2006) 313-322
25. Grünberger W., Heilmaier M., and Schultz L. Microstructure and mechanical properties of Cu-Ag microcomposites for conductor wires in pulsed high-field magnets. Z Metallkde 93 1 (2002) 58-65
26. Schneider-Muntau H. Private communication.
27. Hirota T., Imai A., Kumano T., Ichihara M., Sakai Y., Inoue K., et al. Development of Cu-Ag alloys conductor for high field magnet. IEEE 30 4 (1994) 1891-1894
28. Lagutin A., Rosseel K., Herlach F., Vanacken J., and Bruynseraede Y. Development of reliable 70 T pulsed magnets. Meas Sci Technol 14 12 (2003) 2144-2150
29. Witte H, Jones H, Gaganov A, Freudenberger J. 70 T using high strength conductors and computer simulations. In: von Ortenberg M, editor. Proceedings of the tenth international conference on megagauss magnetic field generation and related topics, 2005. p. 333-8, ISBN: 3-00-015743-3.
30. Peng T., Gu C., Rosseel K., Vanacken J., and Herlach F. Advanced numerical simulation of pulsed magnets with a finite element method. Meas Sci Technol 16 2 (2005) 562-568
31. Witte H. Private communication.
32. van Sprang M., Oudendijk M., and Frings P. Mechanical properties of wound-reinforcement and fatigue properties of CuAg16%. In: Liangzhen L., Guoliao S., and Luguang Y. (Eds). International conference on magnet technology (1998), Science Press, Beijing
33. Yakovenko L., and Grinberg N. The fatigue life and plastic-deformation character of copper at low-temperatures. Int J Fatigue 5 4 (1983) 239-243
34. Polak J., and Vasek A. Fatigue damage in polycrystalline copper below the fatigue limit. Int J Fatigue 16 6 (1994) 403-408
35. Li M., Heuer J., Stubbins J., and Edwards D. Fracture behavior of high-strength, high-conductivity copper alloys. J Nucl Mater B 283 (2000) 977-981
36. Maier H., Gabor P., and Karaman I. Cyclic stress-strain response and low-cycle fatigue damage in ultrafine grained copper. Mater Sci Eng A 410 (2005) 457-461
37. Billette J., Lecouturier F., and Portugall O. Experimental analysis of mechanical and electrical aging in pulsed magnets. Physica B 346 (2004) 589-593
38. Robles J., Anderson K., Groza J., and Gibeling J. Low-cycle fatigue of dispersion-strengthened copper. Metall Mater Trans A 25 10 (1994) 2235-2245
39. Calabres C., and Laird C. High strain fatigue fracture mechanisms in 2 phase alloys. Metall Trans 5 8 (1974) 1785-1793
40. Eifler D., and Macherauch E. Microstructure and cyclic deformation-behavior of plain carbon and low-alloyed steels. Int J Fatigue 12 3 (1990) 165-174
41. Klesnil M., and Lukas P. Fatigue of metallic materials. Materials science monographs vol. 71 (1992), Elsevier Science Publishers, Amsterdam
42. Lukas P., and Kunz L. Effect of low-temperatures on the cyclic stress-strain response and high cycle fatigue life of polycrystalline copper. Mater Sci Eng A 103 2 (1988) 233-239