Low-cost delamination monitoring of CFRP beams using electrical resistance changes with neural networks

Smart Materials and Structures

Volumn 15, Issue 4, 2006, Pages

  Todoroki, Akira ^a   Ueda, Masahito ^a  

^a TOKYO INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON FIBER REINFORCED PLASTICS; COST EFFECTIVENESS; DATA ACQUISITION; ELECTRIC CONDUCTIVITY; ELECTRIC RESISTANCE; FINITE ELEMENT METHOD; NEURAL NETWORKS; OPTIMIZATION; PARAMETER ESTIMATION; SENSORS;

DDELAMINATION CRACKS; DELAMINATION MONITORING; EXPERIMENTAL RESULTS; REINFORCING CARBON FIBERS;

LAMINATED COMPOSITES;

EID: 33746279925     PISSN: 09641726     EISSN: 1361665X     Source Type: Journal    
DOI: 10.1088/0964-1726/15/4/N01     Document Type: Article

References (30)

1. Moriya K and Endo T 1988 A study on flaw detection method for CFRP composite laminates (1st Report). The measurement of crack extension in CFRP composites by electrical potential method Aeronaut. Space Sci. Japan 36 139-46 (in Japanese)
2. Schulte K and Baron Ch 1989 Load and failure analyses of CFRP laminates by means of electrical resistively measurements Compos. Sci. Technol. 36 63-76
3. Muto N, Yanagida H, Miyayama M, Nakatsuji T, Sugita M and Ohtsuka Y 1992 Foreseeing of fracture in CFGFRP composites by measuring electric resistance J. Japan Soc. Compos. Mater. 18 144-50 (in Japanese)
4. Fischer Chr and Arendts F J 1993 Electrical crack length measurement and the temperature dependence of the mode I fracture toughness of carbon fiber reinforced plastics Compos. Sci. Technol. 46 319-23
5. Chen P W and Chung D D L 1993 Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection Smart Mater. Struct. 2 22-30
6. Kaddoour A S, Al-Salehi F A and Al-Hassani S T S 1994 Electrical resistance measurement technique for detecting failure in CFRP materials at high strain rate Compos. Sci. Technol. 51 377-85
7. Wolfiger C and Drechsier K 1994 Damage detection in composite materials by monitoring electrical impedance Proc. Int. Symp. on Advanced Materials for Lightweight Structures, ESTEC (Noordwijk) pp677-782 ESA-WPP-070
8. Chen P W and Chung D D L 1995 Carbon-fiber-reinforced concrete as intrinsically smart concrete damage assessment during dynamic loading J. Am. Ceram. Soc. 78 816-8
9. Wang X and Chung D D L 1997 Sensing delamination in a carbon fiber polymer-matrix composite during fatigue by electrical resistance measurement Polym. Compos. 18 692-700
10. Irving P E and Thiagarajan C 1998 Fatigue damage characterization in carbon fiber composite materials using an electric potential technique Smart Mater. Struct. 7 456-66
11. Abry J C, Bochard S, Chateauminois A, Salvia M and Giraud G 1999 In situ detection of damage in CFRP laminates by electric resistance measurements Compos. Sci. Technol. 59 925-35
12. Seo D C and Lee J J 1999 Damage detection of CFRP laminates using electrical resistance measurement and neural network Compos. Struct. 47 525-30
13. Abry J C, Choi Y K, Chateauminois A, Dalloz B and Giraud G 2001 In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements Compos. Sci. Technol. 61 855-64
14. Weber I and Schwartz P 2001 Monitoring bending fatigue in carbon-fiber/epoxy composite strands: a comparison between mechanical and resistance techniques Compos. Sci. Technol. 61 849-53
15. Muto N, Arai Y, Shin S G, Matsubara H, Yanagida H, Sugita M and Nakatsuji T 2001 Hybrid composites with self-diagnosing function for preventing fatal fracture Compos. Sci. Technol. 61 875-83
16. Kupke M, Schulte K and Schuler R 2001 Non-destructive testing of FRP by DC and AC electrical method Compos. Sci. Technol. 61 837-47
17. Schueler R, Joshi S P and Schulte K 2001 Damage detection in CFRP by electrical conductance mapping Compos. Sci. Technol. 61 921-30
18. Kubo S, Kuchinishi M, Sakagami T and Ioka S 2001 Identification of delamination in layered composite materials by the electric potential CT method, applied electromagnetics and mechanics Proc. 10th Int. Symp. on Applied Electromagnetics and Mechanics ed T Takagi and M Uesaka (Japan Soc. Appl. Electromagn. Mech.) pp641-2
19. Todoroki A, Matsuura K and Kobayashi H 1995 Application of electric potential method to smart composite structures for detecting delamination JSME Int. J. A 38 524-30
20. Todoroki A, Kobayashi H and Matsuura K 1997 Application of electrical potential method as delamination sensor for smart structures of graphite/epoxy US-Japan Workshop on Smart Materials and Structures ed K Inoue, S I Y Shen and M Taya (University of Washington TMS) pp47-54
21. Todoroki A 1997 Delamination detection by electric resistance change for graphite/PEEK composites Proc. 5th Japan Int. SAMPE Symp. pp899-904
22. Todoroki A, Suzuki H, Kobayashi H, Nakamura H and Shimamura Y 1998 Evaluation of orthotropic electrical resistance for delamination detection of CFRP by electrical potential method Trans. Japan. Soc. Mech. Eng. 1654-9 (in Japanese)
23. Todoroki A and Suzuki H 2000 Health monitoring of internal delamination cracks for graphite/epoxy composites by electric potential method Appl. Mech. Eng. 5 283-94
24. Todoroki A, Tanaka Y and Shimamura Y 1999 Response surface for delamination monitoring of graphite/epoxy composite using electric resistance change Structural Health Monitoring 2000 ed F K Chang (Technomic) pp308-16
25. Todoroki A, Tanaka Y and Shimamura Y 2001 Electric resistance change method for identification of embedded delamination of CFRP plates Materials Science Research International, Special Technical Publication-2, JSMS pp139-45
26. Todoroki A, Tanaka Y and Shimamura Y 2002 Delamination monitoring of graphite/epoxy laminated composite plate of electric resistance change method Compos. Sci. Technol. 62 1151-60
27. Todoroki A 2001 Effect of number of electrodes and diagnostic tool for delamination monitoring of graphite/epoxy laminates using electric resistance change Compos. Sci. Technol. 61 1871-80
28. Todoroki A, Tanaka M and Shimamura Y 2002 Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with electric resistance change method Compos. Sci. Technol. 62 619-28
29. Todoroki A, Tanaka M and Shimamura Y 2003 High performance estimations of delamination of graphite/epoxy laminates with electric resistance change method Compos. Sci. Technol. 63 1911-20
30. Simon H 1999 Neural Networks: A Comprehensive Foundation 2nd edn (Princeton, NJ: Prentice-Hall)