A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process

Optics and Lasers in Engineering

Volumn 45, Issue 12, 2007, Pages 1115-1130

  Alimardani, Masoud ^a   Toyserkani, Ehsan ^a   Huissoon, Jan P ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Coupled temperature and stress strain fields modeling; Laser solid freeform fabrication; Numerical modeling

Indexed keywords

LASER BEAM EFFECTS; MULTILAYERS; STRESS CONCENTRATION; THERMAL EFFECTS; THERMAL STRESS;

COUPLED TEMPERATURE; LASER SOLID FREEFORM FABRICATION; STRESS/STRAIN FIELDS;

SOLID STATE LASERS;

EID: 34548561725     PISSN: 01438166     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.optlaseng.2007.06.010     Document Type: Article

References (33)

1. Hu D., Mei H., and Kovacevic R. Improving solid freeform fabrication by laser based additive manufacturing. Proc Inst Mech Eng-Part B-Eng Manuf 216 9 (2002) 1253-1264
2. Paul C.P., Jain A., Ganesh P., Negi J., and Nath A.K. Laser rapid manufacturing of Colmonoy-6 components. J Opt Lasers Eng 44 (2006) 1096-1109
3. Zhong M., Liu W., Ning G., Yang L., and Chen Y. Laser direct manufacturing of tungsten nickel collimation component. J Mater Process Technol 147 2 (2004) 167-173
4. Dubourg L., Ursescu D., Hlawka F., and Cornel A. Laser cladding of MMC coatings on aluminum substrate: influence of composition and microstructure on mechanical properties. J Wear 258 11-12 (2005) 1745-1754
5. Kim J.D., Kang K.H., and Kim J.N. Nd:YAG laser cladding of marine propeller with hastelloy C-22. J Appl Phys A, Mater Sci Process 79 4-6 (2004) 1583-1585
6. Hu D., and Kovacevic R. Sensing, modeling and control for laser-based additive manufacturing. Int J Mach Tool Manuf 43 1 (2003) 51-60
7. Nickel A.H., Barnett D.M., and Prinz F.B. Thermal stresses and deposition patterns in layered manufacturing. J Mater Sci Eng A 317 (2001) 59-64
8. Adak B., Nash P., and Chen D. Microstructural characterization of laser cladding of Cu-30Ni. J Mater Sci 40 8 (2005) 2051-2054
9. Niederhauser S., and Karlsson B. Mechanical properties of laser cladded steel. J Mater Sci Technol 19 11 (2003) 1611-1616
10. Huang Y.L., Liang G.Y., Su J.Y., and Li J.G. Interaction between laser beam and powder stream in the process of laser cladding with powder feeding. J Model Simulat Mater Sci Eng 13 1 (2005) 47-56
11. Huang Y.L., Liu J., Ma N.H., and Li J.G. Three-dimensional analytical model on laser-powder interaction during laser cladding. J Laser Appl 18 1 (2006) 42-46
12. Toyserkani E., Khajepour A., and Corbin S.F. 3-D finite element modeling of laser cladding by powder deposition: effects of powder feedrate and travel speed on the process. J Laser Appl 15 3 (2003) 153-161
13. Pinkerton A.J., and Li L. Modeling the geometry of a moving laser melt pool and deposition track via energy and mass balances. J Phys D: Appl Phys 37 (2004) 1885-1895
14. Han L., Liou F.W., and Phatak K.M. Modeling of laser cladding with powder injection. J Metall Mater Trans B 35 6 (2004) 1139-1150
15. Hu D., and Kovacevic R. Modeling and measuring the thermal behavior of the molten pool in closed-loop controlled laser-based additive manufacturing. J Eng Manuf 212 Part B (2003) 441-452
16. Vasinonta A., Beuth J.L., and Grifith M.L. A process map for consistent build condition in the solid freeform fabrication of thin-walled structures. J Manuf Sci Eng 123 4 (2001) 615-622
17. Han L., Phatak K.M., and Liou F.W. Modeling of laser deposition and repair process. J Laser Appl 17 2 (2005) 89-99
18. Costa R., Vilar L., Reti T., and Deus A.M. Rapid tooling by laser powder deposition: process simulation using finite element analysis. J Acta Mater 53 (2005) 3987-3999
19. Lee W., Myoung J.M., Yoo Y.H., and Shin H. Effect of thermal misfit stress on crack deflection at planar interfaces in layered systems. J Compos Sci Technol 66 (2006) 435-443
20. D'Oliveira A.S.C.M., Da Silva P.S.C.P., and Vilar R.M.C. Microstructural features of consecutive layers of satellite 6 deposited by laser cladding. J Surf Coat Technol 153 (2002) 203-209
21. Klingbeil N.W., Beuth J.L., Chin R.K., and Amon C.H. Residual stress-induced warping in direct metal solid freeform fabrication. Int J Mech Sci 44 2 (2002) 57-77
22. Mughal M.P., Fawad H., Mufti R.A., and Siddique M. Deformation modeling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters. J Model Simulat Mater Sci Eng 13 (2005) 1187-1204
23. Jendrzejewski R., Sliwinski G., Krawczuk M., and Ostachowicz W. Temperature and stress fields induced during laser cladding. J Comput Struct 82 2 (2004) 653-658
24. Ghosh S., and Choi J. Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process. J Laser Appl 17 3 (2005) 144-158
25. White F.M. Heat transfer (1984), Addison-Wesley Publishing Company 588pp
26. Mase G.T., and Mase. G.E. Continuum mechanics for engineers. 2nd ed (1999), CRC Press
27. Brown S., and Song H. Finite element simulation of welding of large structures. Trans ASME J Eng Ind 114 4 (1992) 441-451
28. Lampa C., Kaplan A.F.H., Powell J., and Magnusson C. Analytical thermodynamic model of laser welding. J Phys D: Appl Phys 30 9 (1997) 1293-1299
29. Steen W.M. Laser material processing. 3rd ed (2003), Springer
30. Picasso M., Marsden C.F., Wagniere J.D., Frend A., and Rappaz M. A simple but realistic model for laser cladding. J Metall Mater Trans B 25B 2 (1994) 281-291
31. Noda N., Hetnarski R., and Tanigawa Y. Thermal stresses. 2nd ed (2003), Taylor & Francis
32. Alimardani M., Toyserkani E., and Huissoon J.P. Three-dimensional numerical approach for geometrical prediction of multilayer laser solid freeform fabrication process. J Laser Appl 19 1 (2007) 14-25
33. Nickel AH. Analysis of thermal stresses in shape deposition manufacturing of metal parts. PhD thesis, Stanford University, 1999.