Effect of metal type and surface treatment on in vitro tensile strength of copings cemented to minimally retentive preparations

Journal of Prosthetic Dentistry

Volumn 98, Issue 3, 2007, Pages 199-207

  Abreu, Amara ^a   Loza, Maria A ^b   Elias, Augusto ^b   Mukhopadhyay, Siuli ^a   Rueggeberg, Frederick A ^a  

^a MEDICAL COLLEGE OF GEORGIA   (United States)

^b UNIVERSITY OF PUERTO RICO   (Puerto Rico)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY PRIMER; DENTAL ALLOY; METHACRYLIC ACID DERIVATIVE; OXIDE; RELY X UNICEM; RESIN CEMENT; THIOKETONE; UNCLASSIFIED DRUG;

ANALYSIS OF VARIANCE; ARTICLE; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; HUMAN; METHODOLOGY; MOLAR TOOTH; STATISTICAL MODEL; TENSILE STRENGTH; TOOTH CROWN;

AIR ABRASION, DENTAL; ANALYSIS OF VARIANCE; CROWNS; DENTAL ALLOYS; DENTAL BONDING; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; HUMANS; LIKELIHOOD FUNCTIONS; LOGISTIC MODELS; METHACRYLATES; MOLAR, THIRD; OXIDES; RESIN CEMENTS; TENSILE STRENGTH; THIONES; TOOTH PREPARATION, PROSTHODONTIC;

EID: 34548514789     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(07)60056-0     Document Type: Article

References (43)

1. Zidan O., and Ferguson G. The retention of complete crowns prepared with three different tapers and luted with four different cements. J Prosthet Dent 89 (2003) 565-571
2. Wiskott H., Nicholls J., and Belser U. The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont 9 (1996) 117-139
3. Kaufman E., Coelho D., and Colin L. Factors influencing the retention of cemented gold castings. J Prosthet Dent 11 (1961) 487-502
4. Whiskott H., Nicholls J., and Belser U. The effect of tooth preparation height and diameter on the resistance of complete crowns to fatigue loading. Int J Prosthodont 10 (1997) 207-215
5. el-Mowafy O., Fenton A., Forrester N., and Milenkovic M. Retention of metal ceramic crowns cemented with resin cements: effects of preparation taper and height. J Prosthet Dent 76 (1996) 524-529
6. th ed. (1989), Ishiyaku EuroAmerica, Inc, St. Louis 120
7. rd ed. (1971), Saunders, Philadelphia 68
8. Eames W., O'Neal S., Monteiro J., Miller C., Roan Jr. J., and Cohen K. Techniques to improve the seating of castings. J Am Dent Assoc 96 (1978) 432-437
9. Ohm E., and Silness J. The convergence angle in teeth prepared for artificial crowns. J Oral Rehabil 5 (1978) 371-375
10. Mack P. A theoretical and clinical investigation into the taper achieved on crown and inlay preparations. J Oral Rehabil 7 (1980) 255-265
11. Nordlander J., Weir D., Stoffer W., and Ochi S. The taper of clinical preparations for fixed prosthodontics. J Prosthet Dent 60 (1988) 148-151
12. Browning W., Nelson S., Cibirka R., and Myers M. Comparison of luting cements for minimally retentive crown preparations. Quintessence Int 33 (2002) 95-100
13. Ergin S., and Gemalmaz D. Retentive properties of five different luting cements on base and noble metal copings. J Prosthet Dent 88 (2002) 491-497
14. Cheylan J., Gonthier S., and Degrange M. In vitro push-out strength of seven luting agents to dentin. Int J Prosthodont 15 (2002) 365-370
15. Sen D., Nayir E., and Pamuk S. Comparison of the tensile bond strength of high noble, noble, and base metal alloys bonded to enamel. J Prosthet Dent 84 (2000) 561-566
16. Wilson A., Prosser H., and Powis D. Mechanism of adhesion of polyelectrolyte cements to hydroxyapatite. J Dent Res 62 (1983) 590-592
17. Yoshida Y., Van Meerbeek B., Nakayama Y., Snauwaert J., Hellemans L., Lambrechts P., et al. Evidence of chemical bonding at biomaterial-hard tissue interfaces. J Dent Res 79 (2000) 709-714
18. Verzijden C., Feilzer A., Creugers N., and Davidson C. The influence of polymerization shrinkage of resin cements on bonding to metal. J Dent Res 71 (1992) 410-413
19. Matsumura H., Taira Y., and Atsuta M. Adhesive bonding of noble metal alloys with triazine dithiol derivative primer and an adhesive resin. J Oral Rehabil 26 (1999) 877-882
20. Parsa R., Goldstein G., Barrack G., and LeGeros R. An in vitro comparison of tensile bond strengths of noble and base metal alloys to enamel. J Prosthet Dent 90 (2003) 175-183
21. Laufer B., Nicholls J., and Towsend J. SiOx-C coating: a composite-to-metal bonding mechanism. J Prosthet Dent 60 (1988) 320-327
22. Tanaka T., Atsuta M., Nakabayashi N., and Masuhara E. Surface treatment of gold alloys for adhesion. J Prosthet Dent 60 (1988) 271-279
23. Tanaka T., Hirano M., Kawahara M., Matsumura H., and Atsuta M. A new ion-coating surface treatment of alloys for dental adhesive resins. J Dent Res 67 (1988) 1376-1380
24. Watanabe F., Powers J., and Lorey R. In vitro bonding of prosthodontic adhesives to dental alloys. J Dent Res 67 (1988) 479-483
25. Caughman W., O'Connor R., Williams H., and Rueggeberg F. Retention strengths of three cements using full crown preparations restored with amalgam. Am J Dent 5 (1992) 61-63
26. Dixon D., Breeding L., Hughie M., and Brown J. Comparison of shear bond strengths of two resin luting systems for a base and a high noble metal alloy bonded to enamel. J Prosthet Dent 72 (1994) 457-461
27. Breeding L., and Dixon D. The effect of metal surface treatment on the shear bond strengths of base and noble metals bonded to enamel. J Prosthet Dent 76 (1996) 390-393
28. Yoshida K., Kamada K., and Atsuta M. Adhesive primers for bonding cobalt-chromium alloy to resin. J Oral Rehabil 26 (1999) 475-478
29. Matsumura H., Shimoe S., Nagano K., and Astuta M. Effect of noble metal conditioners on bonding between prosthetic composite material and silver-palladium-copper-gold alloy. J Prosthet Dent 81 (1999) 710-714
30. Yoshida K., and Atsuta M. Effects of adhesive primers for noble metals on shear bond strengths of resin cements. J Dent 25 (1997) 53-58
31. Yoshida K., Taira Y., Matsumura H., and Atsuta M. Effect of adhesive metal primers on bonding a prosthetic composite resin to metals. J Prosthet Dent 69 (1993) 357-362
32. Antoniadou M., Kern M., and Strub J. Effect of a new metal primer on the bond strength between a resin cement and two high-noble alloys. J Prosthet Dent 84 (2000) 554-560
33. Buchanan W., Svare C., and Turner K. The effect of repeated firings and strength on marginal distortion in two ceramometal systems. J Prosthet Dent 45 (1981) 502-506
34. Strating H., Pameijer C., and Gildenhuys R. Evaluation of the marginal integrity of ceramometal restorations. Part I. J Prosthet Dent 46 (1981) 59-65
35. Richter-Snapp K., Aquilino S., Svare C., and Turner K. Change in marginal fit as related to margin design, alloy type, and porcelain proximity in porcelain-fused-to-metal restorations. J Prosthet Dent 60 (1988) 435-439
36. Pameijer C., and Jefferies S. Retentive properties and film thickness of 18 luting agents and systems. Gen Dent 44 (1996) 524-530
37. Ayad M., Rosenstiel S., and Salama M. Influence of tooth surface roughness and type of cement on retention of complete cast crowns. J Prosthet Dent 77 (1997) 116-121
38. Yim N., Rueggeberg F., Caughman W., Gardner F., and Pashley D. Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations. J Prosthet Dent 83 (2000) 459-465
39. Tjan A., and Li T. Seating and retention of complete crowns with a new adhesive resin cement. J Prosthet Dent 67 (1992) 478-483
40. Mausner I., Goldstein G., and Georgescu M. Effect of two dentinal desensitizing agents on retention of complete cast coping using four cements. J Prosthet Dent 75 (1996) 129-134
41. Piegorsch W., and Richwine K. Large-sample pairwise comparisons among multinomial proportions with an application to analysis of mutant spectra. JABES 6 (2001) 305
42. Smith D., and Cooper W. The determination of shear strength. A method using a micro-punch apparatus. Br Dent J 130 (1971) 333-337
43. Sano H., Shono T., Sonoda H., Takatsu T., Ciucchi B., Carvalo R., et al. Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent Mater 10 (1994) 236-240