Re-entrainment of wall deposits from a laboratory-scale spray dryer

Asia-Pacific Journal of Chemical Engineering

Volumn 2, Issue 2, 2007, Pages 90-107

  Hanus, M J ^a   Langrish, T A G ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

Author keywords

Droplets; Re suspension; Spray drying; Wall deposition

Indexed keywords

ATMOSPHERIC HUMIDITY; DROPS; FLOW VELOCITY; NOZZLES; SODIUM CHLORIDE; SPRAY DRYING; WETTING;

AIR-TO-LIQUID RATIOS; RE-ENTRAINMENT; RE-SUSPENSION; WALL DEPOSITION;

DRYERS (EQUIPMENT);

EID: 34548082082     PISSN: 19322135     EISSN: 19322143     Source Type: Journal    
DOI: 10.1002/apj.47     Document Type: Article

References (41)

1. Adhikari B, Howes T, Bhandari BR, Truong V. Surface stickiness of drops of carbohydrate and organic acid solutions during convective drying: experiments and modeling. Dry. Technol. 2003; 21: 839-873.
2. Akiyama T, Tanijiri Y. Criterion for re-entrainment of particles. Powder Technol. 1989; 57: 21-26.
3. Australian Bureau of Statistics. The Australian Dairy Industry, Retrieved May 14, 2006; from http://www.abs.gov.au/ausstats/abs@nsf/Previousproducts/ 1301.0Feature%20Article182004? opendocument&tabname=Summary &prodno= 1301.0&issue= 2004&num=&view=.
4. Bahu RE. In Drying 92, Mujumdar AS, Filkova I (eds). Elsevier: Amsterdam, 1992; 74.
5. Best S. Understanding Air Flow Patterns Inside a Pharmaceutical Sized Spray Dryer. Undergraduate thesis, School of Chemical and Biomolecular Engineering, University of Sydney, Sydney, Australia, 2005; 34.
6. Bika D, Tardos GI, Panmai S, Farber L, Michaels JN. Strength and morphology of solid bridges in dry granules of pharmaceutical powders. Powder Technol. 2005; 150: 104-116.
7. Boonyai P, Bhandari B, Howes T. Stickiness measurement tech-niques for food powders: a review. Powder Technol. 2004; 145: 34-46.
8. Braaten DA. Wind tunnel experiments of large particle reentrainment-deposition and development of large particle scaling parameters Aerosol Sci. Technol. 1994; 21: 157-169.
9. Chen XD. Heat-mass transfer and structure formation during drying of single food droplets. Dry. Technol. 2004; 22: 179-190.
10. Chen XD, Farid M, Reid D, Fletcher A, Pearce D, Chen NX. In Proceedings of Chemeca ' 99, vol. 1, Rotorua, New Zealand, 1999; 825.
11. Cleaver JW, Yates B. A sub layer model for the deposition of particles from a turbulent flow. Chem. Eng. Sci. 1975; 30: 983-992.
12. Corn M, Stein F. Re-entrainment of particles from a plane surface. Am. Ind. Hyg. Assoc. J. 1965; 26: 325-336.
13. Farber L, Tardos GI, Michaels JN. Evolution and structure of drying material bridges of pharmaceutical excipients: studies on a microscopic slide. Chem. Eng. Sci. 2003; 58: 4515-4525.
14. Hein K, Hucke T, Stintz M, Ripperger S. Analysis of adhesion forces between particles and wall based on the vibration method. Part. Part. Syst. Char. 2002; 19: 269-276.
15. Jindal VK, Boonyai P. Proceedings of the Second Asia-Oceania Drying Conference. Pulau Pinang: Malaysia, 2001; 477.
16. Keey RB. Introduction to Industrial Drying Operations. Pergamon Press: Oxford, 1978; 376.
17. Keey RB. In Advances in Drying, vol. 5, Mujumdar AS (ed.). Hemisphere Publishing Corporation: New York, 1992; 48.
18. Keey RB, Suzuki M. On the characteristic drying curve. Int. J. Heat Mass Transfer 1974; 17: 1455-1464.
19. Keey RB, Pham QT. Behaviour of spray dryers with nozzle atomizers. Chem. Eng. (London) 1976; 311: 516-521.
20. Kieviet FG. Modelling quality in spray drying, PhD thesis, T.U. Eindhoven, The Netherlands, 1997; 55.
21. Kota K, Langrish TAG. Fluxes and patterns of wall deposits for skim milk in a pilot-scale spray dryer. Dry. Technol. 2006a; 24: 993-1001.
22. Kota K, Langrish TAG. Prediciton of wall deposition behaviour in a pilot-scale spray dryer using deposition correlations for pipe flows. Journal of Zhejiang University Science A, 2007; 8: 301-312.
23. Krupp H. Particle adhesion - theory and experiment. Adv. Colloid Interface Sci. 1967; 1: 111-239.
24. Langrish TAG, Zbicinski I. The effect of air inlet geometry and spray cone angle on the wall deposition rate in spray dryers. Trans. Inst. Chem. Eng. 1994; 72: 420-430.
25. Langrish TAG, Kockel TK. The implementation of a characteristic drying curve for milk powder using a Computational Fluid Dynamics simulation. Chem. Eng. J. 2001; 83: 69-74.
26. Langrish TAG, Marquez N, Kota K. An investigation and quantitative assessment of particle shape in milk powders from a laboratory-scale dryer. Dry. Technol. 2006; 24: 1619-1630.
27. Liou JK, Bruin S. An approximate method for the nonlinear diffusion problem with a power relation between the diffusion coefficient and concentration. 1. Computation of desorption times. 2. Computation of the concentration profile. Int. J. Heat Mass Transfer 1982; 25: 1209-1229.
28. Masters K. Spray Drying: An Introduction to Principles, Operational Practice and Applications. George Goodwin Limited: London, 1976; 23.
29. Masuda H, Matsusaka S. In Powder Technology Handbook, Gotoh K, Masuda H, Higashitani K (eds). Marcel Dekker: New York, 1997; 133.
30. Ozmen L, Langrish TAG. An experimental investigation of the wall deposition of milk powder in a pilot-scale spray dryer. Dry. Technol. 2003; 21: 1253-1272.
31. Ozmen L, Langrish TAG, Gipps EM. In Proceedings of the Sixth Australasian Heat and Mass Transfer Conference, Sydney, 1998; 427.
32. Perry RH, Green DW, Malony JO. Perry's Chemical Engineers' Handbook (7th edn). McGraw-Hill: New York, 1997; 2-166.
33. Ranz WE, Marshall WR. Evaporation from drops. Chem. Eng. Prog. 1952; 148: 141-146.
34. Rhodes M. Introduction to Particle Technology. Wiley: New York, 1998; 2.
35. Trommelen AM, Crosby EJ. Evaporation and drying of drops in superheated vapors. AIChE J. 1970; 16: 857-886.
36. Truong V, Bhandari BR, Howes T. Optimization of co-current spray drying process of sugar-rich foods. Part I - moisture and glass transition temperature profile during drying. J. Food Eng. 2005; 71: 55-65.
37. Welty JR. Engineering Heat Transfer - SI Version. John Wiley and Sons: New York, 1978; 237.
38. Wynen E. Organic Agriculture in Australia - Levies and Expenditure. Rural Industries Research and Development Corporation: Canberra, Australia; retrieved May 13, 2006, 2003; from http://www.rirdc.gov.au/ reports/ORG/03-062.pdf.
39. Yung BPK, Merry H, Bott TR. Effects of particle-surface interactions on deposition and re-entrainment of a particulate fouling system. Geothermics 1989; 18: 327-335.
40. Zbicinski I, Li X. Conditions for accurate CFD modelling of spray drying process. Dry. Technol. 2006; 24: 1109-1114.
41. Ziskind G, Fichman M, Gutfinger C. Resuspension of particulates from surfaces to turbulent flows - Review and analysis. J. Aerosol Sci. 1994; 26: 613-644.