Constitutive descriptions for metal forming simulations

AIP Conference Proceedings

Volumn 908, Issue , 2007, Pages 3-24

  Barlat, Frédéric ^a,b  

^a ALCOA TECHNICAL CENTER   (United States)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Alloy; Anisotropy; Constitutive model; Forming; Metal; Micro structure; Plasticity

Indexed keywords

EID: 34547413933     PISSN: 0094243X     EISSN: 15517616     Source Type: Conference Proceeding    
DOI: 10.1063/1.2740786     Document Type: Conference Paper

References (136)

1. Y. Brechet, "Materials and process selection methods," In Handbook of Materials Behavior Models, edited by J. Lemaitre, San Diego: Academic Press, 2001, pp. 15-29.
2. D. Raabe, F. Roters, F. Barlat, L.Q. Chen (editors), Continuum Scale Simulations of Engineering Materials - Fundamentals - Microstructures - Process Applications, Berlin: Wiley-VCH Verlag GmbH, 2004.
3. J. Lemaitre, (editor), Handbook of Materials Behavior Models, San Diego: Academic Press, 2001.
4. D.G. Altenpohl, Aluminum: Technology, Applications and Environment, Warrendale (PA): TMS, 1998.
5. W.A. Spitzig, O. Richmond, "The effect of pressure on the flow stress of metals," Acta Metal. 32, 457-463 (1984).
6. L. Taleh, F. Sidoroff, "A micromechanical model of the Greenwood-Johnson mechanism in transformation induced plasticity," Int. J. Plasticity 19, 1821-1842 (2003).
7. F. Perocheau, J. Driver, "Slip systems rheology of Al-1%Mn crystals deformed by hot plane strain compression," Int. J. Plasticity 18, 185-203 (2002).
8. A. Korbel, "Structural and mechanical aspects of homogeneous and non-homogeneous deformation in solids," in Localization and Fracture Phenomena in Inelastic Solids, P. Perzyna (editor), Wien: Springer-Verlag, 1998, pp. 21-98.
9. P.F. Thomason, Ductile Fracture of Metals, Oxford: Pergamon Press,1990.
10. M.E. Kassner, TA. Hayes, "Creep cavitation in metal", Int. J. Plasticity 19, 1715-1864 (2003).
11. Z.-D. Zhou, S.-X. Zhao, Z.-B. Kuang, "An integral elasto-plastic constitutive theory," Int. J. Plasticity 19, 1377-1400, (2003).
12. A.S. Krausz, K. Krausz, "The constitutive law of deformation kinetics," in Unified Constitutive Laws of Plastic Deformation, A.S. Krausz, K. Krausz, (editors), San Diego: Academic Press, 1996, pp. 229-279.
13. W.F. Hosford, R.M. Caddell, Metal Forming-Mechanics and Metallurgy, Englewood Cliffs (NJ): Prentice-Hall, Inc., 1983.
14. R.A. Lebensohn, C.N. Tomé, "A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys," Acta Metall. Mater. 41, 2611-2624 (1993).
15. U.F. Kocks, C.N. Tomé, H.-R. Wenk, Texture and Anisotropy, Cambridge: University Press, 1998.
16. W. Gambin, Plasticity and Texture, Amsterdam: Kluwer Academic Publishers, 2001.
17. S.R. Kalidindi, "Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fee metals," Int. J. Plasticity 17, 837-860 (2001).
18. A. Staroselski, L. Anand, "A constitutive model for hep materials deforming by twinning: Application to magnesium alloy AZ31B," Int. J. Plasticity 19, 1843-1864 (2003).
19. J.W.F. Bishop, R. Hill, "A theory of the plastic distortion of a polycrystalline aggregate under combined stresses," Phil. Mag. 42, 414-427 (1951).
20. S.S. Hecker, "Experimental studies of yield phenomena in biaxially loaded metals", in Constitutive Modelling in Viscoplasticity, A. Stricklin, K.C. Saczalski (editors), New-York: ASME, 1976, pp. 1-33.
21. U.F. Kocks, "Laws of work-hardening and low-temperature creep," ASME J. Eng. Mater. Technol. 98, 76-83 (1976).
22. H. Mecking, in: Work-Hardening in Tension and Fatigue, A.W. Thompson, (editor), New York: AIME, 1977.
23. H. Mecking, "Strain hardening and dynamic recovery," In: Dislocation Modelling of Physical Systems, M.F. Ashby, R. Bullough, C.S. Hartley, J.P. Hirth, (editors), New-York: Pergamon Press, 1981, pp. 197-211.
24. U.F. Kocks, "A statistical theory of flow stress and work-hardening," Phil. Mag. 13, 541-566 (1966).
25. A.B. Lopes, F. Barlat, J.J. Gracio, J. Ferreira Duarte, E.F. Rauch, "Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear," Int. J. Plasticity 19, 1-22 (2003).
26. Y. Estrin, "Dislocation density-related constitutive modeling," in Unified Constitutive Law of Plastic Deformation, A.S. Krausz, K. Krausz (editors), San Diego: Academic Press, 1996, pp. 69-106.
27. L.P. Kubin, Y. Estrin, "Evolution for dislocation densities and the critical conditions for the Portevin-Le Chatelier effect," Acta Metall. Mater. 38, 697-708 (1990).
28. E. Rizzi, P. Hähner, "On the Portevin-Le Chatelier effect: Theoretical modeling and numerical results," Int. J. Plasticity 20, 121-165 (2004).
29. G. Vincze, E.F. Rauch, J.J. Gracio, F. Barlat, A.B. Lopes, "A comparison of the mechanical behaviour of an AA1050 and a low carbon steel deformed upon strain reversal," Acta Materialia 53, 1005-1013 (2005).
30. O. Richmond, W.A. Spitzig, "Pressure dependence and dilatancy of plastic flow", in Proc. 15th International Congress of Theoretical and Applied Mechanics (IUTAM), Amsterdam: North-Holland Publishers, 1980, pp. 377-386.
31. W.A. Spitzig, R.J. Sober, O. Richmond, "The effect of hydrostatic pressure on the deformation behavior of Maraging and HY-80 steels and its implication for plasticity theory," Metall. Trans. 7A, 1703-1710 (1976).
32. W.A. Spitzig, "Effect of hydrostatic pressure on plastic flow properties of iron single crystal," Acta Metall. 27, 523-534 (1979).
33. J. Jung, "A note on the influence of hydrostatic pressure on dislocations," Philos. Mag. A 43, 1057-1061 (1981).
34. V.V. Bulatov, O. Richmond, M.V. Glazov, "An atomistic dislocation mechanism of pressure-dependent plastic flow in aluminium," Acta Materialia 47, 3507-3514 (1999).
35. R. Hill, The Mathematical Theory of Plasticity, Oxford: University Press, 1950.
36. J.-B. Leblond, Mécanique de la rupture fragile et ductile, Paris: Lavoisier, 2003.
37. A.L. Gurson, "Continuum theory of ductile fracture by void nucleation and growth - Part I: Yield criteria and flow rules for porous ductile media," ASME J. Eng. Materials and Technology 99, 2-15 (1977).
38. M. Gologanu, J.-B. Leblond, J. Devaux, "Approximate models for ductile metals containing nonspherical voids-case of axisymmetric prolate ellipsoidal cavities," J. Mech. Phys. Solids 41, 1723-1754 (1993).
39. Z. Li, P. Steinmann, "RVE-based studies on the coupled effects of void size and void shape on yield behavior and void growth at micron scales," Int. J. Plasticity 22, 1195-1216 (2006).
40. A. Needleman, "Void growth in an elastic-plastic medium," ASME J. App. Mech. 39, 964-970 (1972).
41. J. Koplik, A. Needleman, "Void growth and coalescence in porous plastic solids," Int. J. Solids Structures 24, 835-853 (1988).
42. B. Budianski, J.W. Huchinson, S. Slutski, "Void growth and collapse in viscous solids," in Mechanics of Solids, edited by H.G. Hopkins and M.J. Sewell, Oxford: Pergamon Press, 1982, p. 13-45.
43. V. Tvergaard, C. Niordson, "Nonlocal plasticity effects on interaction of different size voids," Int. J. Plasticity 20, 107-120 (2004).
44. S. Suresh, A. Mortensen, A. Needleman, (editors), Fundamentals of Metal-Matrix Composites, Boston: Butterworth-Heinemann, 1993.
45. P. Suquet, (editor), Continuum Micromechanics, Wien: Springer, 1997.
46. R. Hill, "Elastic Properties of Reinforced Solids: Some Theoretical Principles," J. Mech. Phys. Solids 11, 357-372 (1963).
47. R. Hill, "A Self-Consistent Mechanics of Composite Materials," J. Mech. Phys. Solids 13, 213-222 (1965).
48. T. Mori, K. Tanaka, "Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions," Acta Metal. 21, 571-574 (1973).
49. Y. Benveniste, "A new Approach to the Application of Mori-Tanaka's Theory in Composite Materials," Mechanics of Materials 6, 147-157 (1987).
50. J.D. Eshelby, "The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems," Proc. Roy. Soc. A241, 376-396 (1957).
51. G.J. Weng, "Micromechanical determination of Two-Phase Plasticity," Int. J. Plasticity 1, 225-287 (1985).
52. G.J. Weng, "Theoretical Principles for the determination of Two Kinds of Composite Plasticity: Inclusion Plastic vs Matrix Plastic," Mechanics of Composite Materials 92, 193-208 (1988).
53. D.C. Van Aken, D.J. Miller, P. Kurath, H.L. Frase, "The Elastic Modulus of Rapidly Solidified Al-Mn and Al-Be Alloys," in High Strength Powder Metallurgy Aluminum Alloys, G.J. Hildeman, M.J. Koczak, (editors), Warrendale (PA): TMS, 1986, pp. 387-402.
54. H. Zogg, E. Török, G. Hausch, H.Warlimont, "Physikalishe Eigenshaften einiger Aluminiumreicher intermetallisher Phasen," Aluminium 55, 332-333 (1979).
55. M.E. Drits, L.S. Toropova, F.L. Gushchina, S.G. Fedotov, "Some properties of the A13Sc phase," Sov. Non-Ferrous Met. Res. 12, 83-85 (1984).
56. D.V. Wilson, "Reversible work-hardening in alloys of cubic metals," Acta Metall. 13, 807-814 (1965).
57. P. Bate, W.T. Roberts, D.V. Wilson, "The plastic anisotropy of two-phase aluminum alloys -I. Anisotropy in unidirectional deformation", Acta Metall. 29, 1797-1814 (1981).
58. C.-S. Han, R.H. Wagoner, F. Barlat, "On precipitate-induced hardening in crystal plasticity: Theory," Int. J. Plasticity 20, 477-494 (2004).
59. C.-S. Han, R.H. Wagoner, F. Barlat, "On precipitate-induced hardening in crystal plasticity: Algorithms and Simulations," Int. J. Plasticity 20, 1441-1461 (2004).
60. J.H. Hollomon, "Tensile deformation," Trans AIME 12, 1-22 (1945).
61. H.W. Swift, "Plastic instability under plane stress," J. Mech. Phys. Solids 1, 1 (1952).
62. E. Voce, "The relationship between stress and strain for homogeneous deformation," J. Inst. Metals 74, 537 (1948).
63. D.J. Lege, F. Barlat, J.C. Brem, "Characterization and modeling of the mechanical behavior and formability of 2008 autobody sheet," Int. J. Mech. Sci. 31, 549-563 (1989).
64. F. Barlat, M.V. Glazov, J.C. Brem, D.J. Lege, "A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys," Int. J. Plasticity 18, 919-939 (2002).
65. F. Barlat, M.E. Karabin, R. Shuey, D. Chakrabarti, "Fracture toughness modeling for aerospace aluminum alloy 7085," In: Anisotropy, Texture, Dislocations and Multiscale Modeling in Finite Plasticity & Viscoplasticity, and Metal Forming, A.S. Khan, R. Kazmi, (editors), Fulton (MD): Neat Press, 2006, pp. 322-324.
66. A.A. Salem, S.R. Kalidindi, S.L. Semiatin, "Strain hardening due to deformation twinning in a-titanium: constitutive relations and crystal-plasticity modeling," Acta Mater. 53, 3495-3502 (2005).
67. F. Barlat, O. Cazacu, M. Życzowski, D. Banabic, J.W. Yoon, "Yield surface plasticity and anisotropy", in Continuum Scale Simulation of Engineering Materials - Fundamentals - Microstructures - Process Applications, D. Raabe, F. Roters, F. Barlat, L.-Q. Chen, (editors), Berlin: Wiley-VCH Verlag GmbH, 2004, pp. 145-177.
68. th Century," Appl. Mech. Rev. 55, 198-218 (2002).
69. J.P. Boehler, "Lois de Comportement anisotropes des milieux continus," J. Mécanique 17, 153-190 (1978).
70. M. Zyczkowski, Combined Loadings in the Theory of Plasticity, Warsaw, Polish Scientific Publisher, 1981.
71. O. Cazacu, F. Barlat, "Application of the theory of representation to describe yielding of anisotropic aluminum alloys," Int. J. Eng. Sci. 41, 1367-1385 (2003).
72. F. Barlat, H. Aretz, J.W. Yoon, M.E. Karabin, J.C. Brem, R.E. Dick, "Linear transformation-based anisotropic yield functions," Int. J. Plasticity 21, 1009-1039 (2005).
73. F. Barlat, J.W. Yoon, O. Cazacu, "On linear transformation-based anisotropic yield functions," Int. J. Plasticity, in press (2007).
74. A.V. Hershey, "The plasticity of an isotropic aggregate of anisotropic face centred cubic crystals," J. Appl. Mech. 21, 241-249 (1954).
75. W.F. Hosford, The Mechanics of Crystals and Polycrystals, Oxford: Science Publications, 1993.
76. A.P. Karafillis, M.C. Boyce, "A general anisotropic yield criterion using bounds and a transformation weighting tensor," J. Mech. Phys. Solids 41, 1859-1886 (1993).
77. F. Bron, J. Besson, "A yield function for anisotropic materials. Application to aluminum alloys," Int. J. Plasticity 20, 937-963 (2004).
78. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, E. Chu, "Plane stress yield function for aluminum alloy sheets-Part I: theory," Int. J. Plasticity 19, 1297-1319 (2003).
79. L.M. Smith, F. Pourboghrat, J.W. Yoon, T.B. Stoughton, (editors.), Proc. 6th Intern. Conf. on Numerical Simulations of 3D Sheet Metal Forming (NUMISHEET), Detroit, Aug. 2005, Melville (NY): AIP.
80. R.W. Logan, W.F. Hosford, "Upper-bound anisotropic yield locus calculations assuming pencil glide," Int. J. Mech. Sci. 22, 419-430 (1980).
81. J.W. Yoon, F. Barlat, R.E. Dick, K. Chung, T.J. Kang, "Plane stress yield function for aluminum alloy sheets-Part II: FE formulation and its implementation," Int. J. Plasticity 20, 495-522 (2004).
82. J.W. Yoon, F. Barlat, R.E. Dick, M.E., Karabin, "Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function," Int. J. Plasticity 22, 174-193 (2006).
83. J.W. Yoon, F. Barlat, "Modeling and simulation of the forming of aluminum sheet alloys," in ASM Handbook, Volume 14B, Metalworking: Sheet Forming, Materials Park (OH), ASM International, 2006, pp. 792-826.
84. O. Cazacu, F. Barlat, "A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals," Int. J. Plasticity 20, 2027-2045 (2004).
85. O. Cazacu, B. Plunkett, F. Barlat, "Orthotropic yield criterion for Mg alloy sheets", in Proceedings of the 8th Conference of the European Scientific Association for Material Forming, Cluj-Napoca, Romania, April 27-29, 2005, D. Banabic, (editor), Bucharest: The Publishing House of the Romanian Academy, 2005, pp. 3-10.
86. O. Cazacu, B. Plunkett, F. Barlat, "Orthotropic yield criterion for hexagonal close packed metals," Int. J. Plasticity 22, 1171-1194 (2006).
87. W.F. Hosford, T.J. Allen, "Twinning and directional slip as a cause for strength differential effect," Met. Trans. 4, 1424-1425 (1973).
88. P.J. Maudlin, T.G. Gray, C.M. Cady, C.G. Kaschner, "High rate material modeling and validation using the Taylor cylinder impact test," Phil Trans Roy. Soc. 357, 1707-1729 (1999).
89. G.C. Kaschner, G.T. Gray, "The influence of crystallographic texture and interstitial impurities on the mechanical behavior of zirconium," Metall. Mater. Trans. A. 31, 1997-2003 (2000).
90. C.N. Tomé, P.J. Maudlin, R.A. Lebensohn, G.C. Kaschner, "Mechanical Response of zirconium-I. Derivation of a polycrystal constitutive law and finite element analysis," Acta Mater. 49, 3085-3096 (2001).
91. B. Plunkett, O. Cazacu, R.A. Lebensohn, F. Barlat, "Elastic- viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test," Int. J. Plasticity, in press (2007).
92. B. Plunkett, R.A. Lebensohn, O. Cazacu, F. Barlat, "Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening," Acta Materialia 54, 4159-4169 (2006).
93. R. Hill, "Constitutive dual potential in classical plasticity," J. Mech. Phys. Solids 35, 23-33 (1987).
94. R. Fortunier, "Dual potentials and extremum work principles in single crystal plasticity," J. Mech. Phys. Solids 37, 779-790 (1989).
95. M. Arminjon, B. Bacroix, "On plastic potentials for anisotropic metals and their derivation from the texture function,"Acta Mechanica 88, 219-243 (1991).
96. M. Arminjon, D. Imbault, B. Bacroix, J.L. Raphanel, "A fourth-order plastic potential for anisotropic metals and its analytical calculation from the texture function," Acta Mech. 107, 33-51 (1994).
97. P. Van Houtte, "Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials," Int. J. Plasticity 10, 719-748 (1994).
98. P. Van Houtte, "Yield loci based on crystallographic texture," In: Handbook of Materials Behavior Models, J. Lemaitre (editors), San Diego: Academic Press, 2001, pp. 137-154.
99. K. Chung, O. Richmond, "A deformation theory of plasticity based on minimum work paths," Int. J. Plasticity 9, 907-920 (1993).
100. K. Chung, O. Richmond, "Mechanics of ideal forming," ASME J. Appl. Mech. 61, 176-181 (1994).
101. K. Chung, S.Y. Lee, F. Barlat, Y.T. Keum, J.M. Park, "Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential," Int. J. Plasticity 12, 93-115 (1996).
102. S. Li, E. Hoferlin, A. Van Bael, P. Van Houtte, "Application of a texture-based plastic potential in earing prediction of an IF steel," Advanced Engineering Materials 3, 990-994 (2001).
103. F. Barlat, K. Chung, "Anisotropic potentials for plastically deforming metals," Model. Simul. Mater. Sci. Eng. 1, 403-416 (1993).
104. F. Barlat, K. Chung, O. Richmond, O., "Strain rate potential for metals and its application to minimum work path calculations," Int. J. Plasticity 9, 51-63 (1993).
105. F. Barlat, D.J. Lege, J.C. Brem, "A six-component yield function for anisotropic materials," Int. J. Plasticity 7, 693-712 (1991).
106. F. Barlat, K. Chung, "Anisotropic strain rate potential for aluminum alloy plasticity," In: Proc. 8th ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, April 2005, D. Banabic, (editor), Bucharest: The Publishing House of the Romanian Academy, 2005, pp. 415-418.
107. D. Kim, F. Barlat, S. Bouvier, T. Rabahallah, T.M. Balan, K. Chung, "Non-quadratic anisotropic potential based on linear transformation of plastic strain rate," Int. J. Plasticity, in press (2007).
108. J. Lemaitre, J.-L. Chaboche, Mechanics of Solid Materials, Cambridge: University Press, 1990.
109. J.L. Chaboche, "Unified cyclic viscoplastic constitutive equations: Development, capabilities, and thermodynamic framework," in: Unified Constitutive Laws of Plastic Deformation, A. S. Krausz, K. Krausz, (editors), San Diego: Academic Press, 1996, pp. 1-68.
110. F. Barlat J. Liu, "Modeling precipitate-induced anisotropy in binary Al-Cu alloys," Mat. Sci. Eng. A257, 47-61 (1998).
111. C. Teodosiu, Z. Hu, "Microstructure in the continuum modeling of plastic anisotropy," in Proc. Risø International Symposium on Material Science: Modelling of Structure and Mechanics of Materials from Microscale to products, Roskilde, Denmark, Risø National Laboratory, J.V. Cartensen, T. Leffers, T., Lorentzen, O.B. Pedersen, B.F. Serensen, G. Winther, (editors), 1998, pp. 149-168.
112. B. Peeters, M. Seefeldt, C. Teodosiu, S.R. Kalindindi, P. Van Houtte, E. Aernould, "Work hardening/softening behaviour of b.c.c. polycrystals during changing strain path: II. An integrated model based on substructure and texture evolution, and its predictions of the stress-strain behaviour of an IF steel during two-stage strain paths," Acta Mater. 49, 1607-1619 (2001).
113. Y.F. Dafalias, E.P. Popov, "A model of nonlinearly hardening materials for complex loading", Acta Mechanica 21, 173-192 (1975).
114. K. Hashiguchi, "Generalized Plastic Flow Rule," Int. J. Plasticity 21, 321-351 (2005).
115. Z. Mroz, "Non-associated flow laws in plasticity," J. de Mécanique 2, 21-42 (1963).
116. Z. Mroz, "Multisurface hardening model for monotonic and cyclic response of metals," in: Handbook of Materials Behavior Models, J. Lemaitre, (editor), San Diego: Academic Press, 2001, pp. 223-231.
117. P. Perzyna, "Fundamental problems in viscoplasticity," in Recent Advances in Applied Mechanics, Vol. 9, New York: Academic Press, 1966, pp. 243-377.
118. E. Krempl, "A small-strain viscoplasticity theory based on overstress", in Unified Constitutive Laws of Plastic Deformation, A.S. Krausz, K. Krausz (editors), San Diego: Academic Press, 1996, pp. 281-318.
119. R. J. Asaro, A. Needleman, "Texture development and strain hardening in rate dependent polycrystals," Acta Metall. 33, 923-953 (1985).
120. M.A. Khaleel, H.M. Zbib, E.A. Nyberg, "Constitutive modeling of deformation and damage in superplastic materials," Int. J. Plasticity 17, 277-296 (2001).
121. K.C. Hoh, J. Lin, T.A. Dean, "Modeling of springback in creep forming thick aluminum sheets," Int. J. Plasticity 20, 733-751 (2004).
122. S. Murakami, "Model of anisotropic creep damage," in Handbook of Materials Behavior Models, J. Lemaitre (editor), San Diego: Academic Press, 2001, pp. 446-452.
123. V. Tvergaard, "On Localization in Ductile Materials Containing Spherical Voids," Int. J. Fracture 18, 237-252 (1982).
124. V. Tvergaard, A. Needleman, "The modified Gurson model," in Handbook of Materials Behavior Models, J. Lemaitre (editor), San Diego: Academic Press, 2001, pp. 430-435.
125. V. Tvergaard, "Influence of voids on shear band instabilities under plane strain conditions," Int. J. Fracture 17, 389-407 (1981).
126. V. Tvergaard, A. Needleman, "Analysis of the cup-cone fracture in around tensile bar," Acta Metall. 32, 157-169 (1984).
127. K. Siruguet, J.-B. Leblond, "Effect of void locking by inclusions upon the plastic behavior of porous ductile solids -1: Theoretical modeling and numerical study of void growth," Int. J. Plasticity 20, 225-254 (2004).
128. K. Siruguet, J.-B. Leblond, "Effect of void locking by inclusions upon the plastic behavior of porous ductile solids - part II: Theoretical modeling and numerical study of void coalescence," Int. J. Plasticity 20, 255-268 (2004).
129. T. Pardoen, J.W. Hutchinson, "An extended model for void growth and coalescence," J. Mech. Physics Solids 48, 2467-2512 (1999).
130. Z.P.Huang, J. Wang, "Nonlinear mechanics of solids containing isolated voids," Applied Mechanics Review 59, 210-229 (2006).
131. J.-B. Leblond, G. Perrin, J. Devaux, "An improved Gurson-type model for hardenable ductile metals," Eur. J. Mechanics A/Solids 14, 499-527 (1995).
132. J.M. Duva, J.W. Hutchinson, "Constitutive potentials for dilutely voided nonlinear materials," Mech. Mater. 3, 41-54 (1984).
133. J.L. Chaboche, "Continuous damage mechanics - A tool to describe phenomena before crack initiation," Nucl. Eng. Des. 64, 233-247 (1981).
134. J. Skrzypek, A. Ganczarski, Modeling of Material Damage and Failure of Structures, Berlin: Springer, 1999.
135. C.L. Chow, Y. Wei, "Anisotropic damage," in Handbook of Materials Behavior Models, J. Lemaitre (editor), San Diego: Academic Press, 2001, pp. 421-429.
136. W.Y. Chien, J. Pan, S.C. Tang, "A combined necking and shear localization analysis for aluminum alloys sheets under biaxial stretching conditions," Int. J. Plasticity 20, 1953-1981 (2004).