Addition of P2O5 to SiO2-Al 2O3-B2O3-MgO-CaO-Na2O glass: A study of its effects on glass properties, structure and melting behaviour

Glass Technology: European Journal of Glass Science and Technology Part A

Volumn 48, Issue 2, 2007, Pages 78-88

  Bingham, P A ^a   Hand, R J ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTALLINEFLUORAPATITE; PHOSPHATE RAW MATERIALS;

CRYSTALLIZATION; GLASS TRANSITION; MELTING; PLATINUM ALLOYS; SILICA; SOLUBILITY; THERMOANALYSIS;

GLASS;

EID: 34347238616     PISSN: 00171050     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (61)

1. Bingham, P. A. & Marshall, M. Reformulation of container glasses for environmental benefit through lower melting temperatures, Glass Technol., 2005, 46, 11-19.
2. Bingham, P. A. Reformulation of container glass for energy efficiency, Carbon Trust project reference 2002-6-32-1-3, final project report, November 2003. Available electronically from the author upon request.
3. Integrated pollution prevention and control (IPPC), Secretary of State's guidance for glass manufacturing activities with melting capacity more than 20 tonnes per day, DEFRA, UK, June 2003; http://www.defra.gov.uk/ environment/ppc/laippc/sg2.pdf
4. Good Practice Guide 127, Energy efficient environmental control in the glass industry - revised, Energy efficiency Best Practice Programme, published by ETSU, Harwell, Didcot, Oxfordshire, OX11 0QJ, UK; Available to download for registered users at http://www.thecarbontrust.org.uk.
5. 5 on the properties of container glass, Glass Technol., 2004, 45 (6), 255-8.
6. Bingham, F. A. Container glass formulation: a fresh look at an old problem, Glass, 2003, 80, 336.
7. Jones, J. V. & Ohlberg, S. M. Flat glass composition with improved melting and tempering properties. US Patent 5,071,796, December 10, 1991.
8. Pecoraro, G. A., Shelestak, L. J. & Markovic, R. Methods of adjusting glass melting and forming temperatures without substantially changing bending and annealing temperatures and glass articles produced thereby. US Patent 6,878,652, April 12, 2005.
9. Erickson, T. D. & Wolf, W. W. Glass compositions, fibres and methods of making same. U. S. Patent 4,026,715, May 31, 1977.
10. Sproull, J. F. Low boron glass fibres with low index of refraction. U. S. Patent 4,771,019, September 13, 1988.
11. Eastes, W. L., Hofmann, D. A. & Wingert, J. W. Boron-free glass fibres. US Patent 5,789,329, August 4, 1998.
12. 3-CaO compositions, structures and properties. J. Non-Cryst. Solids, 2004, 349, 377-87.
13. 3-CaO-MgO phase diagram. Part 1. Structures, properties and crystallisation potential of eutectic and selected multioxide E-glass compositions. Ceram. Trans., 2004, 170, 181-99.
14. 2O. Glastech. Ber. Glass Sci. Technol., 2004, 77C, 170-83.
15. Wallenberger, F. T., Watson, J. C. & and Li, H. Glass Fibres, in ASM Handbook, Vol. 21: Composites, ASM International, Ohio, USA, 2001, p. 27-34.
16. Wallenberger, F. T., Hicks, R. J. & Bierhals, A. T. Effect of oxides on decreasing melt viscosity and energy demand of E-glass. Bull. Amer. Ceram. Soc., 2006, 85, 38-43.
17. Wallenberger, F. T. & Park, A. Glass fibre composition, US Patent 6,686,304, February 3, 2004.
18. Wallenberger, F. T. Glass fibre forming compositions, US Patent 6,818,575, November 16, 2004.
19. Neely, H. E., Jnr. Low pollution glass fibre compositions, US Patent 4,066,466, January 3, 1978.
20. Neely, H. E., Jnr. Glass fibre composition, US Patent 4,166,747, September 3, 1979.
21. Ponmieu, C., Petitmaire, D., Jousse, D. & Fournier, P. Glasses for substrates intended for electronics and related products, US Patent 5,387,560, February 7, 1995.
22. Ross, C. P. & Tincher, G. Glass melting technology: a technical and economic assessment, Glass manufacturing industry council, USA, October 2004. http://www.gmic.org/News/ISBN0976128306txt.pdf
23. Simpson, W. Calumite slag as a glassmaking raw material for the increase of furnace productivity, Glass Technol., 1976, 17 (1), 35-40.
24. Jones, S. A better environment, Giass Int., 2005, 28, 22.
25. Hartley, A. A study of the balance between furnace operating parameters and recycled glass in glass melting furnaces, Glass Technology Services, UK; Carbon Trust Case No. 2003-03-082, September 2004. http://www.britglass.org.uk/Files/CarbonTrust-Cullet-Energy.pdf
26. Energy Consumption Guide 27 (3rd Ed.), Energy use in the glass container industry, The Carbon Trust, 2003; Available to download for registered users at http://www.thecarbontrust.org.uk.
27. ASTM D578-00, Standard specification for glass fibre strands, American Society for Testing and Materials, Philadelphia, USA, 2000.
28. C1285-02, Standard test methods for determining chemical durability of nuclear, hazardous, and mixed waste glasses: the product consistency test (PCT), ASTM, Conshohocken, USA, 2002.
29. Bacon, F. R., Close, P., Hall, D. P., Kennedy, R. C. & Rees, V. C. Effect of fluorine and phosphorus pentoxide on properties of soda-dolomite lime-silica glass, J. Am. Ceram. Soc., 1944, 27, 369-72.
30. Volf, M. B. Chemical approach to glass, Elsevier, Amsterdam, 1984.
31. McMillan, P. W. Glass-Ceramics, Academic Press, London, 1964.
32. Berezhnoi, A. I. Glass-Ceramics and Photo-Sitalls, Plenum Press, New York, 1970.
33. Cousi, C., Bart, F. & Phalippou, J. Phase separation and crystallisation induced by adding molybdenum and phosphorus to a soda-lime-silica glass, Glass Technol., 2004, 45 (2), 65-7.
34. Eitel, W. Silicate science. Vol. 2. Glasses, enamels, slags, Academic Press, New York, 1965.
35. Partridge, J. H. Resistant glasses for modern electric discharge lamps, J. Soc. Glass Technol., 1935, 19, 266-78.
36. Stanworth, J. E. Glass manufacture for electric lamps. The development of special glasses for mercury discharge lamps, J. Soc. Glass Technol., 1939, 23, 268-80.
37. Stanworth, J. E. Some investigations on aluminophosphate and aluminosilicate glasses, J. Soc. Glass Technol., 1946, 30, 381-96.
38. Volf, M. B. Technical Glasses, Sir Isaac Pitman & Sons, London, 1961.
39. Chen, X., Hench, L. L., Greenspan, D., Zhong, J. & Zhang, X. Investigation on phase separation, nucleation and crystallisation in bioactive glass-ceramics containing fluorophlogopite and fluorapatite. Ceram. Int., 1998, 24, 401-10.
40. 5 system. Ceram. Int., 2000, 26, 415-20.
41. Ślósarczyk, A., Paluszkiewicz, C, Gawlicki, M. & Paszkiewicz, Z. The FTIR spectroscopy and QXRD studies of calcium phosphate based materials produced from the powder precursors with different Ca/P ratios, Ceram. Int., 1997, 23, 297-304.
42. Rapacz-Kmita, A., Paluskiewicz, C., Ślósarczyk, A. & Paszkiewicz, Z. FTIR and XRD investigations on the thermal stability of hydroxyapatite during hot pressing and pressureless sintering processes, J. Mol. Struct., 2005, 744-747, 653-6.
43. Salama, S. N., Saad, E. A., Darwish, H. & Abo-Mosallam, H. A. Formation of glass-ceramic materials based on pyroxene solid solution-fluorapatite phases and their thermal expansion properties, Ceram. Int., 2005, 31, 559-66.
44. Campbell, J. H. & Wallerstein, E. P. Effects of melting conditions on platinum-inclusion content in phosphate laser glasses, Glastech, Ber. Glass Sci. Technol., 1995, 68, 11-21.
45. Levin, E. M., Robbins, C. R. & McMurdie, H. E. Phase Diagrams for Ceramists, American Ceramic Society, Columbus, OH, USA, 1964.
46. Ryerson, F. J. & Hess, P. C. The role of PA in silicate melts. Geochim. Cosmochim. Acta, 1980, 44, 611-624.
47. 5. Glastech. Ber., Glass Sci. Technol., 2000, 73, 380-4.
48. 2 glasses, J. Non-Cryst. Solids, 2000, 263&264, 312-17.
49. 5 on the viscosity of melts of differing alkali/aluminium ratio: implications for the structural role of phosphorus in silicate melts, Geochim. Cosmochim. Acta, 1996, 60, 4107-21.
50. Toplis, M. J., Dingwell, D. B. & Libourel, G. The effect of phosphorus on the iron redox ratio, viscosity, and density of an evolved ferro-basalt, Contrib. Mineral. Petrol., 1994, 117, 293-304.
51. 5 cordierite-type glasses. J. Mater. Sci. Lett., 1985, 4, 835-7.
52. SciGlass Information System, v.5, 2002.
53. Volf, M. B. Mathematical approach to glass, Elsevier, Amsterdam, 1988.
54. Krohn, D. A., Graf, R. E. & Deeg, E. W. High strength ophthalmic lens, US Patent 4,042,405, August 16, 1977.
55. Beerkens, R. G. C. & van Limpt, J. Evaporation in industrial glass melt furnaces, Glastech. Ber. Glass Sci. Technol., 2001, 74, 245-257.
56. Ouchetto, M., Elouadi, B. & Parke, S. Volatilisation from phosphate glass melts, Phys. Chem. Glasses, 1991, 32, 202-206.
57. Bingham, P. A. & Hand, R. J. Vitrification of toxic wastes: a brief review. Adv. Appl. Ceram., 2006, 105, 21-31.
58. Deydier, E., Gullet, R. & Sharrock, P. Beneficial use of meat and bone meal combustion residue: 'an efficient low cost material to remove lead from aqueous effluent'. J. Hazard. Mater., 2003, B101, 55-64.
59. Deydier, E., Guilet, R., Sarda, S. & Sharrock, P. Physical and chemical characterisation of crude meat and bone meal combustion residue: 'waste or raw material?' J. Hazard. Mater., 2005, B121, 141-8.
60. Collins, R. Feasibility of producing concrete products from meat and bone meal ash, Building Research Establishment, UK, 21st July 2003. http://www.breweb.org.uk/pdf/458E_report.pdf
61. Bingham, P. A. & Hand, R. J. Recycling of incinerator ashes: Potential energy-saving materials for the manufacture of glasses and ceramics or simply low-grade agrregate materials? Proc. 1st Int. Congr. Ceram., Toronto, Canada, June 2006.