FRM-based FIR filters with optimum finite word-length performance

IEEE Transactions on Signal Processing

Volumn 55, Issue 6 II, 2007, Pages 2914-2924

  Lim, Yong Ching ^a   Yu, Ya Jun ^a   Teo, Kok Lay ^b   Saramäki, Tapio ^c  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^b CURTIN UNIVERSITY   (Australia)

^c TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

Coefficient sensitivity; Finite word length effect; FIR digital filter; Frequency response masking (FRM); High selectivity filter; Low complexity filter; Round off noise; Sharp filter; Signal word length; Sparse coefficient filter

Indexed keywords

FREQUENCY RESPONSE; OPTIMIZATION; SIGNAL PROCESSING;

FINITE WORD-LENGTH; FREQUENCY RESPONSE MASKING; ROUND OFF NOISE; SIGNAL WORD-LENGTH;

FIR FILTERS;

EID: 34249815509     PISSN: 1053587X     EISSN: None     Source Type: Journal    
DOI: 10.1109/TSP.2007.893965     Document Type: Article

References (54)

1. Y. C. Lim, "Frequency-response masking approach for the synthesis of sharp linear phase digital filter," IEEE Trans. Circuits Syst., vol. CAS-33, no. 4, pp. 357-364, Apr. 1986.
2. G. Rajan, Y. Neuvo, and S. K. Mitra, "On the design of sharp cutoff wideband fir filters with reduced arithmetic complexity," IEEE Trans. Circuits Syst., vol. 35, no. 11, pp. 1447-1454, Nov. 1988.
3. Y. C. Lim and Y. Lian, "The optimum design of one- and two-dimensional FIR filters using the frequency response masking technique," IEEE Trans. Circuits Syst. II, vol. CAS-40, no. 2, pp. 88-95, Feb. 1993.
4. J. H. Lee and C. K. Chen, "Design of sharp FIR filters with prescribed group delay," in Proc. IEEE Int. Symp. Circuits Syst., 1993, pp. 92-95.
5. Y. C. Lim and Y. Lian, "Frequency-response masking approach for digital filter design: Complexity reduction via masking filter factorization," IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 41, no. 8, pp. 518-525, Aug. 1994.
6. M. G. Bellanger, "Improved design of long FIR filters using the frequency masking technique," in Proc. IEEE Int. Conf. Acoust. Speech Signal Process., 1996, pp. 1272-1275.
7. L. C. R. Barcellos, S. L. Netto, and P. S. R. Diniz, "Optimization of FRM filters using the WLS-Chebyshev approach," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 99-113, Mar./Apr. 2003.
8. T. Saramäki and Y. C. Lim, "Use of the Remez algorithm for designing FRM based FIR filters," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 77-97, Mar./Apr. 2003.
9. W. S. Lu and T. Hinamoto, "Optimal design of frequency-response-masking filters using semidefinite programming," IEEE Trans. Circuits Syst. I, Fundam. Theory Appl., vol. 50, no. 4, pp. 557-568, Apr. 2003.
10. Y. Lian and C. Z. Yang, "Complexity reduction by decoupling the masking filters from bandedge shaping filter in FRM technique," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 115-135, Mar./Apr. 2003.
11. Y. Lian, "Complexity reduction for FRM based FIR filters using the prefilter-equalizer technique," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 137-155, Mar./Apr. 2003.
12. T. Saramäki, J. Yli-Kaakinen, and H. Johansson, "Optimization of frequency-response-masking based fir filters," Circuits Syst. Comput., vol. 12, no. 5, pp. 563-590, Oct. 2003.
13. W. R. Lee, V. Rehbock, and K. L. Teo, "Frequency-response masking based FIR filter design with power-of-two coefficients and suboptimum PWR," Circuits Syst. Comput., vol. 12, no. 5, pp. 591-600, Oct. 2003.
14. O. Gustafsson, H. Johansson, and L. Wanhammar, "Single filter frequency-response masking FIR filter," Circuits Syst. Comput., vol. 12, no. 5, pp. 601-630, Oct. 2003.
15. W. S. Lu and T. Hinamoto, "Optimal design of IIR frequency-response-masking filters using second-order cone programming," IEEE Trans. Circuits Syst. I, Fundam. Theory Appl., vol. 50, no. 11, pp. 1401-112, Nov. 2003.
16. W. R. Lee, V. Rehbock, K. L. Teo, and L. Caccetta, "A weighted least-square-based approach to FIR filter design using the frequency-response masking technique," IEEE Signal Process. Lett. vol. 11, no. 7, pp. 593-596, Jul. 2004.
17. A. Usman and S. A. Khan, "Simulation of frequency response masking approach for FIR filter design," WSEAS Trans. Syst., vol. 3, no. 10, pp. 2919-2924, Dec. 2004.
18. Y. J. Yu, K. L. Teo, Y. C. Lim, and G. H. Zhao, "Extrapolated impulse response filter and its application in the synthesis of digital filters using the frequency-response masking technique," Signal Process., vol. 50, pp. 581-590, Mar. 2005.
19. J. X. Rodrigues and K. R. Pai, "Modified linear phase frequency response masking FIR filter," in Proc. 4th Int. Symp. Image Signal Process. Analy., 2005, pp. 434-439.
20. L. Cen and Y. Lian, "Hybrid genetic algorithm for the design of modified frequency-response masking filters in a discrete space," Circuits, Syst., Signal Process., vol. 25, no. 2, pp. 153-174, Apr. 2006.
21. T. Saramäki, Y. C. Lim, and R. Yang, "The synthesis of half-band filter using frequency-response masking technique," IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 42, no. 1, pp. 58-60, Jan. 1995.
22. Y. Lian, "The optimum design of half-band filter using multi-stage frequency-response masking technique," Signal Process., vol. 44, pp. 369-372, July 1995.
23. C. T. Thia and Y. Lian, "The implementation of a high-speed 645-TAP equivalent half-band FIR filter using the frequency response masking technique," in Proc. IEEE TENCON, 2004, pp. 13-16.
24. Y. C. Lim and S. H. Low, "Frequency-response masking approach for the synthesis of sharp two-dimensional diamond-shaped filters," IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 45, no. 12, pp. 1573-1584, Dec. 1998.
25. H. Johansson and L. Wanhammar, "High-speed recursive digital filters based on the frequency-response masking approach," IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 47, no. 1, pp. 48-61, Jan. 2000.
26. M. D. Lutovac and L. D. Milic, "IIR filters based on frequency-response masking approach," in Proc. 5th Int. Conf. Telecommun. Modern Satellite, Cable Broadcasting Service, 2001, pp. 163-70.
27. O. Gustafsson, H. Johansson, and L. Wanhammar, "Single filter frequency masking high-speed recursive digital filters," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 219-238, Mar./Apr. 2003.
28. H. H. Chen, S. C. Chan, and K. L. Ho, "A semi-definite programming (SDP) method for designing IIR sharp cut-off digital filters using frequency-response masking," in Proc. IEEE Int. Symp. Circuits Syst. 2004, pp. III-149-III-152.
29. J. W. Lee and Y. C. Lim, "Efficient implementation of real filter banks using frequency response masking techniques," in Proc. IEEE Asia-Pacific Conf. Circuits Syst., 2002, pp. 69-72.
30. L. Rosenbaum, P. Lowenborg, and H. Johansson, "Cosine and sine modulated FIR filter banks utilizing the frequency-response masking approach," in Proc. IEEE Int. Symp. Circuits Syst., 2003, pp. III-882-III-885.
31. H. Johansson and T. Saramäki, "Two-channel FIR filter banks utilizing the FRM approach," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 157-192, Mar./Apr. 2003.
32. M. B. Furtado, P. S. R. Diniz, and S. L. Netto, "Optimized prototype filter based on the FRM approach for cosine-modulated filter banks," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 193-210, Mar./ Apr. 2003.
33. S. L. Netto, L. C. R. Barcellos, and P. S. R. Diniz, "Efficient design of narrowband cosine-modulated filter banks using a two-stage frequency-response masking approach," Circuits Syst. Comput., vol. 12, no. 5, pp. 631-642, Oct. 2003.
34. R. Bregovic and T. Saramaki, "Design of two-channels FIR filterbanks with rational sampling factors using the FRM technique," in Proc. IEEE Int. Symp. Circuits Syst., 2005, pp. 1098-1101.
35. Y. C. Lim and R. Yang, "On the synthesis of very sharp decimators and interpolators using the frequency-response masking technique," IEEE Trans. Signal Process., vol. 53, no. 4, pp. 1387-1397, Apr. 2005.
36. H. Johansson, "Two classes of frequency-response masking linear-phase FIR filters for interpolation and decimation," Circuits Syst. Signal Process., vol. 25, no. 2, pp. 175-200, Apr. 2006.
37. Y. C. Lim and Y. J. Yu, "Synthesis of very sharp Hilbert transformer using the frequency-response masking technique," IEEE Trans. Signal Process., vol. 53, pp. 2595-2597, Jul. 2005.
38. Y. C. Lim, Y. J. Yu, and T. Saramaki, "Optimum masking levels and coefficient sparseness for Hilbert transformers and half-band filters designed using the frequency-response masking technique," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 52, no. 11, pp. 2444-2453, Nov. 2005.
39. Y. C. Lim, Y. J. Yu, H. Q. Zheng, and S. W. Foo, "FPGA implementation of digital filters synthesized using the FRM technique," Circuits Syst. Signal Process., vol. 22, no. 2, pp. 211-218, Mar./Apr. 2003.
40. Y. Lian, "A modified frequency response masking structure for high-speed FPGA implementation of programmable sharp FIR filters," Circuits Syst. Comput., vol. 12, no. 5, pp. 643-654, Oct. 2003.
41. W. Boonkumklao, Y. Miyanaga, and K. Dejhan, "A flexible architecture for digital signal processing," IEICE Trans. Inf. Syst., pt. E86D, pp. 2179-2186, Oct. 2003.
42. P. S. R. Diniz, L. C. R. de Barcellos, and S. L. Netto, "Design of high-resolution cosine-modulated transmultiplexers with sharp transition band," IEEE Trans. Signal Process., vol. 52, pp. 1278-1288, May 2004.
43. Y. Lian and J. H. Yu, "The reduction of noises in ECG signal using a frequency response masking based FIR filter," in Proc. IEEE Int. Workshop Biomed. Circuits Syst., 2004, pp. S2/4-17-S2/4-20.
44. Y. Lian and Y. Wei, "A computationally efficient nonuniform FIR digital filter bank for hearing aids," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 52, no. 12, pp. 2754-2762, Dec. 2005.
45. Y. C. Lim, "A digital filter bank for digital audio systems," IEEE Trans. Circuits Syst., vol. CAS-33, no. 8, pp. 848-849, Aug. 1986.
46. R. H. Yang, S. B. Chiah, and W. Y. Chan, "Design and implementation of a digital audio tone control unit using an efficient FIR filter structure," in Proc. IEEE Region 10 Annu. Int. Conf., 1996, pp. 273-277.
47. C. S. Lin and C. Kyriakakis, "Frequency response masking approach for designing filter banks with rational sampling factors," in Proc. IEEE Workshop Appl. Signal Process. Audio Acoust., 2003, pp. 99-102.
48. S. W. Foo and W. T. Lee, "Application of fast filter bank for transcription of polyphonic signals," Circuits Syst. Comput., vol. 12, no. 5, pp. 654-674, Oct. 2003.
49. S. W. Foo and W. T. Lee, "Recognition of piano notes with the aid of FRM filters," in Proc. Int. Symp. Control, Commun. Signal Process. 2004, pp. 409-413.
50. N. Hayasaka, N. Wada, S. Yoshizawa, and Y. Miyanaga, "A robust speech recognition system using FRM running spectrum filtering," in Proc. Int. Symp. Control, Commun. Signal Process., 2004, pp. 401-404.
51. Y. Liu and Z. Lin, "On the applications of the frequency-response masking technique in array beamforming," Circuits, Syst. Signal Process., vol. 25, no. 2, pp. 201-224, Apr. 2006.
52. Y. Zhang, W. Wu, and B. Tian, "A novel sharp-cutoff FIR filter design technique and its application in software radio," in Proc. Int. Conf. Commun. Technol., 2003, pp. 1821-1829.
53. H. Saleh, E. Zimmermann, G. Brandenburg, and H. Halling, "Efficient FPGA-based multistage two-path decimation filter for noise thermometer," in Proc. 13th Int. Conf. Microelectron., 2001, pp. 161-164.
54. L. R. Rabiner and B. Gold, Theory and Application of Digital Signal Processing. Englewood Cliffs, NJ: Prentice-Hall, 1975, ch. 5, pp. 295-355.