The initial stability and contact mechanics of a press-fit resurfacing arthroplasty of the hip

Journal of Bone and Joint Surgery - Series B

Volumn 89, Issue 4, 2007, Pages 549-556

  Udofia, I J ^a   Liu, F ^a   Jin, Z ^a   Roberts, P ^b   Grigoris, P ^c  

^a UNIVERSITY OF LEEDS   (United Kingdom)

^b ROYAL GWENT HOSPITAL   (United Kingdom)

^c UNIVERSITY OF BRADFORD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY; CHROMIUM; COBALT;

ACETABULUM; ARTICLE; BONE REGENERATION; COMPRESSION; FEMUR HEAD; HIP ARTHROPLASTY; HIP PROSTHESIS; PHANTOM; POISSON DISTRIBUTION; PRIORITY JOURNAL; PROSTHESIS FIXATION; PROSTHESIS MATERIAL;

ACETABULUM; ARTHROPLASTY, REPLACEMENT, HIP; FINITE ELEMENT ANALYSIS; FRICTION; HIP PROSTHESIS; HUMANS; OSSEOINTEGRATION; PROSTHESIS DESIGN; STRESS, MECHANICAL; SURFACE PROPERTIES;

EID: 34249782310     PISSN: 0301620X     EISSN: None     Source Type: Journal    
DOI: 10.1302/0301-620X.89B4.18055     Document Type: Article

References (63)

1. Kishida Y, Sugano N, Hishii T, et al. Preservation of the bone mineral density of the femur after surface replacement of the hip. J Bone Joint Surg [Br] 2004;86-B:185-9.
2. Treacy RBC, McBryde CW, Pynsent PB. Birmingham hip resurfacing arthroplasty: a minimum follow-up of five years. J Bone Joint Surg [Br] 2005;87-B:167-70.
3. Daniel J, Pynsent PB, McMinn DJ. Metal-on-metal resurfacing of the hip in patients under the age of 55 years with osteoarthritis. J Bone Joint Surg [Br] 2004;86-B: 177-84.
4. Itayem R, Arndt A, Lundberg A, Nistor L, McMinn D. Stability of the Birmingham hip resurfacing arthroplasty at two years: a radiostereophotogrammetric analysis study. J Bone Joint Surg [Br] 2005;87-B:158-62.
5. Amstutz HC, Grigoris P, Dorey FJ. Evolution and future of surface replacement of the hip. J Orthop Sci 1998;3:169-86.
6. Noble P, Paravic V, Ismaily S. Are big heads the solution to dislocation after total hip replacement? Procs 48th Annual Meeting of the Orthopaedic Research Society, 2002.
7. Schmalzried TP, Fowble VA, Ure KJ, Amstutz HC. Metal on metal surface replacement of the hip: technique, fixation and early results. Clin Orthop 1996;329(Suppl):106-14.
8. de Smet KA, Pattyn C, Verdonk R. Early results of primary Birmingham hip resurfacing using a hybrid metal-on-metal couple. Hip Int 2002;12:158-62.
9. Amstutz HC, Beaule PE, Dorey FJ, et al. Metal-on-metal hybrid surface arthroplasty: two to six-year follow-up study. J Bone Joint Surg [Am] 2004;86-A:28-39.
10. Back DL, Dalziel R, Young D, Shimmin A. Early results of primary Birmingham hip resurfacings: an independent study of the first 230 hips. J Bone Joint Surg [Br] 2005;87-B: 324-9.
11. Grigoris P, Roberts P, Panousis K, Bosch H. The evolution of hip resurfacing arthroplasty. Orthop Clin North Am 2005:36:125-34.
12. Morscher EW. Current status of acetabular fixation in primary total hip arthroplasty. Clin Orthop 1992;274:172-93.
13. Muller U, Gautier E, Roeder C, Busato A. The relationship between cup design and the radiological signs of aseptic loosening in total hip arthroplasty. J Bone Joint Surg [Br] 2003;85-B:31-6.
14. Glyn-Jones S, Gill HS, McLardy-Smith P, Murray DW. Roentgen stereophotogrammetric analysis of the Birmingham hip resurfacing arthroplasty: a two-year study. J Bone Joint Surg [Br] 2004;86-B:172-6.
15. Manley MT, Capello WN, D'Antonio JA, Edidin AA, Geesink RGT. Fixation of acetabular cups without cement in total hip arthroplasty: a comparison of three different implant surfaces at a minimum duration of follow-up of five years. J Bone Joint Surg [Am] 1998;80-A:1175-85.
16. Adler E. Stuchin SA, Kummer FJ. Stability of press-fit acetabular cups. J Arthroplasty 1992;7:295-301.
17. Ries MD, Harbaugh M, Shea J, Lambert R. Effect of cementless acetabular cup geometry on strain distribution and press-fit stability. J Arthroplasty 1997;12:207-12.
18. Widmer K-H, Zurfluh B, Morscher EW. Load transfer and fixation mode of press-fit acetabular sockets. J Arthroplasty 2002;17:926-35.
19. Won C-H, Hearn TC, Tile M. Micromotion of cementless hemispherical acetabular components: does press-fit need adjunctive screw fixation? J Bone Joint Surg [Br] 1995;77-B:484-9.
20. McKenzie JR, Callaghan JJ, Pederson DR, Brown TD. Areas of contact and extent of gaps with implantation of oversized acetabular components in total hip arthroplasty. Clin Orthop 1994;298:127-36.
21. Spears IR, Morlock MM, Pfleiderer M, Schneider E, Hille E. The influence of friction and interference on the seating of a hemispherical press-fit cup: a finite element investigation. J Biomech 1999;32:1183-9.
22. Amstutz HC, Campbell PA, Duff MJ. Fracture of the neck of the femur after surface arthroplasty of the hip. J Bone Joint Surg [Am] 2004;86-A:1874-7.
23. Morscher E. Principles of acetabular fixation in THR with special reference to the "press-fit cup". Acta Orthopaedica Belgica 1993;59(Suppl 1):260-6.
24. Kwong LM, O'Connor DO, Sedlacelk RC, et al. A quantitiative in vitro assessment of fit and screw fixation on the stability of a cementless hemispherical acetabular component. J Arthroplasty 1994;9:163-70.
25. Curtis MJ, Jinnah RH. Wilson VD, Hungerford DS. The initial stability of uncemented acetabular components. J Bone Joint Surg [Br] 1992:74-B:372-6.
26. Udofia IJ, Jin ZM. Contact mechanics analysis of metal-on-metal hip resurfacing prostheses. Proc Inst Mech Eng [H] 2004:218:293-305.
27. Thompson MS, Northmore-Ball MD, Tanner KE. Effects of acetabular resurfacing component material and fixation on the strain distribution in the pelvis. Proc Inst Mech [H] 2002;216:237-45.
28. Huiskes R, Strens P, Vroemen W, Slooff TJ. Post-loosening mechanical behavior of femoral resurfacing prostheses. Clin Materials 1990;6:37-55.
29. Visible Human Project. http://www.nlm.nih.gov/research/visibie/ visible_human.html (date last accessed February 2005).
30. Viceconti M, Casali M, Massari B, et al. The 'standardized femur program' proposal for a reference geometry to be used for the creation of finite element models of the femur. J Biomech 1996;29:1241.
31. Augat P, Link T, Lang TF, et al. Anisotropy of the elastic modulus of trabecular bone specimens from different anatomical locations. Med Eng Phys 1998;20:124.
32. Mann KA, Bartel DL, Wright TM, Burstein AH. Coulomb frictional interfaces in modeling cemented total hip replacements: a more realistic model. J Biomech 1995;28:1067-78.
33. Shultz TR, Blaha JD, Gruen TA, Normal TL. Cortical bone viscoelasticity and fixation strength of press-fit femoral stems: a finite element model. J Biomech Eng 2006;128:7-12.
34. Spears IR, Pfleiderer M, Schneider E, Hille E, Morlock MM. The effect of interfacial parameters on cup-bone relative micromotions: a finite element investigation. J Biomech 2001;34:113-20.
35. Tai C-L, Shih C-H, Chen W-P, et al. Finite element analysis of the cervico-trochanteric stemless femoral prosthesis. Clin Biomech 2003;19:53-8.
36. Liu F, Udofia IJ, Jin ZM, et al. Comparison of contact mechanics between a total hip replacement and a hip resurfacing with a metal-on-metal articulation. Procs I Mech E Journal of Mechanical Engineering Science Part C 2005:727-32.
37. Shirazi-Adl A, Dammak M, Paiement G. Experimental determination of friction characteristics at the trabecular bone/porous-coated metal interface in cementless implants. J Biomed Mater Res 1993;27:167-75.
38. Rancourt D, Shirazi-Adl A, Drouin G, Paiement G. Friction properties of the interface between porous-surfaced metals and tibial cancellous bone. J Biomed Mater Res 1990;24:1503-19.
39. Shybut GT, Askew MJ, Hori RY, Stulberg SD. Theoretical and experimental studies of femoral stresses following surface replacement hip arthroplasty. Proc Inst Med Chic 1980;33:95-106.
40. Munting E, Verhelpen M. Fixation and effect on bone strain pattern of a stemless hip prosthesis. J Biomech 1995;28:949-61.
41. Huiskes R, Streas PH, van Heck J, Slooff TJ. Interface stresses in the resurfaced hip: finite element analysis of load transmission in the femoral head. Acta Orthop Scand 1985;56:474-8.
42. Bergmann G, Graichen F, Rohlmann A. Hip joint loading during walking and running, measured in two patients. J Biomech 1993;26:969-90.
43. Dude GN, Schneider E, Chao EYS. Internal forces and moments in the femur during walking. J Biomech 1997;30:933-41.
44. Duda GN, Brand D, Freitag S. Lierse W, Schneider E. Variability of femoral muscle attachments. J Biomech 1996;29:1185-90.
45. Spears IR, Pfleiderer M, Schneider E, et al. Interfacial conditions between a press-fit acetabular cup and bone during daily activities: implications for achieving bone ingrowth. J Blomech 2000;33:1471-7.
46. Engh CA, Griffin WL, Marx CL. Cementless acetabular components. J Bone Joint Surg [Br] 1990;72-B:53-9.
47. Parana PG, Lawrence J, Paprosky WG, Patwardhan AG, Sartori M. Acetabular micromotion as a measure of initial implant stability in primary hip arthroplasty: an in vitro comparison of different methods of initial acetabular component fixation. J Arthroplasty 1992;7:537-47.
48. Dowdy PA. Rorabeck CH, Bourne RB. Uncemented total hip arthroplasty in patients 50 years of age or younger. J Arthroplasty 1997;12:853-62.
49. Pilliar RM, Lee JM, Maniatopoulas C. Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clin Orthop 1986;208:108-13.
50. Kienapfel H, Sprey C, Wilke A, Griss P. Implant fixation by bone ingrowth. J Arthroplasty 1999;14:355-68.
51. Jasty M, Bragdon C, Burke D, et al. In vivo skeletal responses to porous-surfaced implants subjected to small induced motions. J Bone Joint Surg [Am] 1997:79-A:707-14.
52. Krismer M, Stockl B, Fischer M, et al. Early migration predicts late aseptic failure of hip sockets. J Bone Joint Surg [Br] 1996;78-B:422-6.
53. Bloebaum RD, Mihalopoulus NL, Jensen JW, Dorr LD. Postmortem analysis of bone growth into porous-coated acetabular components. J Bone Joint Surg [Am] 1997;79-A:1013-22.
54. Ramamurti BS, Orr TE, Bragdon CR, et al. Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment. J Biomed Mater Res 1997;36:274-80.
55. Larsson S, Elloy M, Hansson LI. Fixation of trochanteric hip fractures: a cadaver study of static and dynamic loading. Acta Orthop Scand 1987;58:365-8.
56. Shultz TR, Normal TL, Gruen TA, Blaha JD. The effects of cortical bone viscoelasticity on the short-term fixation of press-fit cylindrical intramedullary rods. Procs ASME International Mechanical Engineering Congress and Exhibition, 2002: American Society of Mechanical Engineers.
57. Norman TL, Ackerman ES, Smith TS, et al. Cortical bone viscoelasticity and fixation strength of press-fit femoral sterns: an in-vitro model. J Biomech Eng 2006;128:13-17.
58. Udofia IJ, Jin ZM. Elastohydrodynamic lubrication analysis of metal-on-metal hip-resurfacing prostheses. J Biomech 2003;36:537-44.
59. Lin ZM, Meakins S, Morlock MM, et al. Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation. Proc Inst Mech Eng [H] 2006;220:299-309.
60. Yew A, Jin ZM, Donn A, Morlock MM, Isaac G. Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation. Proc Inst Mech Eng [H] 2006;220:311-19.
61. Kobayashi S, Saito N, Horiuchi H, Iorio R, Takaoka K. Poor bone quality or hip structure as risk factors affecting survival of total-hip arthroplasty. Lancet 2000;355:1499-504.
62. Graham J, Ries M, Pruitt L. Effect of bone porosity on the mechanical integrity of the bone-cement interface. J Bone Joint Surg [Am] 2003;85-A:1901-8.
63. Zioupos P, Currey JD. Changes in the stiffness, strength and toughness of human cortical bone with age. Bone 1998;22:57-66.