Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites

Composites Science and Technology

Volumn 67, Issue 11-12, 2007, Pages 2261-2270

  Chen, Weiming ^a   Yu, Yunhua ^a   Li, Peng ^a   Wang, Chengzhong ^a   Zhou, Tongyue ^a   Yang, Xiaoping ^a  

^a BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY   (China)

Author keywords

A. Composites; A. Resin matrix; A. T800 carbon fiber; B. Interfacial properties; E. Filament winding

Indexed keywords

ADHESION; CARBON FIBERS; FILAMENT WINDING; PLASTIC FILAMENTS; SHEAR STRENGTH; SURFACE PROPERTIES; TENSILE STRENGTH; TOUGHNESS; VISCOSITY; WETTING;

HARDENER; INTERLAMINAR SHEAR STRENGTH; RESIN DILUTER;

POLYMER MATRIX COMPOSITES;

CARBON FIBER; EPOXY RESIN; FIBER REINFORCED COMPOSITE; FILAMENT; FRACTURE; INTERFACIAL PROPERTY; SHEAR PROPERTY; TENSILE PROPERTY; TESTING; TOUGHNESS; VISCOSITY; WINDING;

EID: 34248569438     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2007.01.026     Document Type: Article

References (45)

1. Donnet J.B., and Bansal R.C. Carbon fiber. 3rd ed. (1998), Marcel Dekker, New York
2. Fitzer E., and Weiss R. Effect of surface treatment and sizing of carbon fibers on the mechanical properties of CFR thermosetting and thermoplastic polymers. Carbon 25 4 (1987) 455-467
3. Severini F., Formaro L., Pegoraro M., and Posca L. Chemical modification of carbon fiber surfaces. Carbon 40 5 (2002) 735-741
4. Pittman Jr. C.U., Jiang W., He G.R., and Gardner S.D. Oxygen plasma and isobutylene plasma treatment of carbon fibers: determination of surface functionality and effects on composite properties. Carbon 36 1 (1998) 25-37
5. Pamula E., and Rouxhet P.G. Bulk and surface chemical functionalities of type III PAN-based carbon fiber. Carbon 41 10 (2003) 1905-1915
6. Pittman Jr. C.U., Jiang W., Yue Z.R., Gardner S., Wang L., Toghiani H., et al. Surface properties of electrochemically oxidized carbon fiber. Carbon 37 11 (1999) 1797-1807
7. Montes-Moran M.A., and Young R.J. Raman spectroscopy study of high-modulus carbon fibers: effect of plasma-treatment on the interfacial properties of single-fiber-epoxy composite, part II: characterization of the fiber-matrix interface. Carbon 40 6 (2002) 857-875
8. Dilsiz N., and Wightman J.P. Surface analysis of unsized and sized carbon fibers. Carbon 37 7 (1999) 1105-1114
9. Iron J.O., and Yuan W. Surface properties of carbon fiber modified by electrodeposition of polyamic acid. Polymer 37 18 (1996) 4197-4203
10. Hideko T., Oyama, and Wightman J.P. Surface characterization of PVP-sized and oxygen plasma-treated carbon fiber. Surf Interf Anal 26 (1998) 39-55
11. Ivens J., Albertsen H., Wevers M., Verpoest I., and Peters P. Interlaminar fracture toughness of CFRP influenced by fiber surface treatment. Part 2: Modeling of the interface effect. Compos Sci Technol 54 2 (1995) 147-159
12. Montes-Morán M.A., Matínez-Alonso A., Tascón J.M.D., Paiva M.C., and Bernardo C.A. Effect of plasma oxidation on the surface and interfacial properties of carbon fiber/polycarbonate composites. Carbon 39 7 (2001) 1057-1068
13. Yumitori S., Wang D., and Jones F.R. The role of sizing resins in carbon fibre-reinforced polyethersulfone (PES). Composites 25 7 (1994) 698-705
14. Gao S.L., Mäder E., and Zhandarov S.F. Carbon fiber and composites with epoxy resins: topography, fractography and interphases. Carbon 42 3 (2004) 515-529
15. Bogoeva-Gaceva G., Mäder E., Häussler L., and Dekanski A. Characterization of the surface and interphase of plasma-treated HM carbon fibers. Composites A 28 5 (1997) 445-452
16. Hughes J.D.H. The carbon fiber/epoxy interface - a review. Compos Sci Technol 41 1 (1991) 13-45
17. Naffakh M., Dumon M., Dupuy J., and Gérard J.F. Cure kinetics of an epoxy/liquid aromatic diamine modified with poly(ether imide). J Appl Polym Sci 96 3 (2005) 660-672
18. Zhang J.S., Karbhari V.M., Wu L., and Reynaud D. Field exposure based durability assessment of FRP column wrap systems. Composites B 34 1 (2003) 41-50
19. Ping C., Xigao J., Hui C., Julong G., Bing H., and Xingsong Z. Study of toughened epoxy resins matrix for carbon fiber composite motor case. Acta Mater Comp Sinica 19 2 (2002) 24-27
20. Liu L., Huang Y.D., Zhang Z.Q., Jiang B., and Nie J. Ultrasonic modification of aramid fiber-epoxy interface. J Appl Polym Sci 81 11 (2001) 2764-2768
21. Marieta C., Schulz E., Irusta L., Gabilondo N., Tercjak A., and Mondragon I. Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites. Compos Sci Technol 65 14 (2005) 2189-2197
22. Marieta C., Schulz E., and Mondragon I. Characterization of interfacial behaviour in carbon-fibre/cyanate composites. Compos Sci Technol 62 2 (2002) 299-309
23. Baoyan Z., Xjanao C., Ping L., and Xiaosu Y. Toughness and hot/wet properties of a novel modified BMI/carbon fiber composite. J Mater Sci Technol 17 1 (2001) 17-18
24. Morgan R.J., and Walkup C.M. Epoxy matrices for filament-wound carbon fiber composites. J Appl Polym Sci 32 1 (1987) 37-46
25. Drzal L.T., Micheal R.J., Koenig M.F., and Lloyd P.F. Adhesion of graphite fibers to epoxy matrices. II. The effect of fiber finish. J Adhes 16 (1983) 133-152
26. Lee J.S., and Kang T.J. Changes in physico-chemical and morphological properties of carbon fiber by surface treatment. Carbon 35 2 (1997) 209-216
27. Piggott M.R. The interface in carbon fibre composites. Carbon 27 5 (1989) 657-662
28. Blackketter D.M., Vpadhyaya D., King T.R., and King J.A. Evaluation of fiber surfaces treatment and sizing on the shear and transverse tensile strengths of carbon fiber-reinforced thermoset and thermoplastic matrix composites. Polym Compos 14 5 (1993) 430-436
29. Dilsiz N., and Wightman J.P. Effect of acid-base properties of unsized and sized carbon fibers on fiber: epoxy matrix adhesion. Colloid Surf A 164 2-3 (2000) 325-336
30. Fernández B., Arbelaiz A., Valea A., Mujika F., and Mondragon I. A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites. Polym Compos 25 3 (2004) 319-330
31. Huttinger K.J., and Krekel G. Polydimethylsiloxane coated carbon fibres for the production of carbon-fibre reinforced carbon. Carbon 29 8 (1991) 1065-1070
32. Chang T.H., Zhang J., Yumitori S., Jones F.R., and Anderson C.W. Sizing resin structure and interphase formation in carbon fibre composites. Composites 25 7 (1994) 661-670
33. Stevens G.C. Cure kinetics of a low epoxide/hydroxyl group-ratio bisphenol a epoxy resin-anhydride system by infrared absorption spectroscopy. J Appl Polym Sci 26 12 (1981) 4279-4297
34. Stevens G.C. Cure kinetics of a high epoxide/hydroxyl group-ratio bisphenol a epoxy resin-anhydride system by infrared absorption spectroscopy. J Appl Polym Sci 26 12 (1981) 4259-4278
35. Ramos J.A., Paganib N., Riccardi C.C., Borrajo J., Goyanes S.N., and Mondragon I. Cure kinetics and shrinkage model for epoxy-amine systems. Polymer 46 10 (2005) 3323-3328
36. Cedeňo A.J., and Vázquez-Torres H. Kinetic study of the effect of poly(phenyl sulfone) on the curing of an epoxy/amine resin by conventional and by temperature modulated differential scanning calorimetry. Polym Int 54 8 (2005) 1141-1152
37. Tanaka Y., and Mika T.F. In epoxy resins, chemistry and technology. In: May C.A., and Tanaka Y. (Eds) (1973), Marcel Dekker, New York
38. Zhang Z., Liu Y., Huang Y., Liu L., and Bao J. The effect of carbon-fiber surface properties on the electron-beam curing of epoxy-resin composites. Compos Sci Technol 62 3 (2002) 331-337
39. Brasquet C., Rousseau B., Estrade-Szwarckopf H., and Cloirec P.L. Observation of activated carbon fibres with SEM and AFM correlation with adsorption data in aqueous solution. Carbon 38 3 (2000) 407-422
40. Figueiredo J.L., Serp P., Nysten B., and Issi J.P. Surface treatments of vapor-grown carbon fibers produced on a substrate. Part II: Atomic force microscopy. Carbon 37 11 (1999) 1809-1816
41. Cazeneuve C., Castle J.E., and Watts J.F. The structure of the interface in carbon fibre composites by scanning auger microscopy. J Mater Sci 25 (1990) 1902-1908
42. Yuan L.Y., Shyu S.S., and Lai J.Y. Plasma surface treatments on carbon fibers. II. Mechanical property and interfacial shear strength. J Appl Polym Sci 42 9 (1991) 2525-2534
43. Krekel G., Huttinger K.J., and Hoffman W.P. Enhanced interfacial adhesion of carbon bers to vinyl ester resin using poly(arylene ether phosphine oxide). J Mater Sci 29 (1994) 3984-3992
44. Scola D.A., and Brooks C.S. Surface aspects of new fibers, boron, silicon carbide, and graphite. J Adhes 2 (1970) 213-237
45. Farrow G.J., Atkinson K.E., Fluck N., and Jpnes C. Effect of low-power air plasma treatment on the mechanical properties of carbon fibres and the interfacial shear strength of carbon fibre-epoxy composites. Surf Interf Anal 23 (1995) 313-318