Retentive strength of all ceramic crowns after long-term water storage;Die Retentionskraft von Zirkonoxidkronen Nach Langzeitwasserlagerung

Asthetische Zahnmedizin

Volumn 10, Issue 1, 2007, Pages 36-45

  Ernst, Claus Peter ^a   Aksoy, Erwin ^a   Stender, Elmar ^a   Willershausen, Brita ^a  

^a UNIVERSITY MEDICAL CENTER MAINZ   (Germany)

Author keywords

All ceramic crowns; Cementation; Long term water storage; Resin cement; Retentive strength; Self adhering cement; Thermocycling; Zirconium oxide

Indexed keywords

EID: 34248202051     PISSN: 14346087     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (32)

1. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003;89:268-274.
2. Blatz MB, Sadan A, Blatz U. The effect of silica coating on the resin bond to the intaglio surface of Procera AllCeram restorations. Quintessence Int 2003;34:542-547.
3. Blackman R, Barghi N, Duke E: Influence of ceramic thickness on the polymerization of light-cured resin cement. J Prosthet Dent 1990;63:295-300.
4. Cavel WT, Kelsey WP, 3rd, Barkmeier WW, Blankenau RJ: A pilot study of the clinical evaluation of castable ceramic inlays and a dual-cure resin cement. Quintessence Int 1988;19:257-262.
5. Chan KC, Boyer DB: Curing light-activated composite cement through porcelain. J Dent Res 1989;68:476-480.
6. Dahl BL, Øilo G. Retentive properties of luting cements: an in vitro investigation. Dent Mater 1986;2:17-20.
7. Della Bona A, Anusavice KJ, Hood JA. Effect of ceramic surface treatment on tensile bond strength to a resin cement. Int J Prosthodont 2002;15:248-253.
8. Ernst CP, Wenzl N, Stender E, Willershausen B. Retentive strengths of cast gold crowns using glass ionomer, compomer or resin cement. J Prosthet Dent 1998;79:472-476.
9. Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005;93:551-558.
10. Fischer H, Weber M, Marx R. Lifetime prediction of all-ceramic bridges by computational methods. J Dent Res 2003;82:238-242.
11. Friederich R, Kern M. Resin bond strength to densely sintered alumina ceramic. Int J Prosthodont 2002;15:333-338.
12. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449-456.
13. Haller B, Hofmann N, Klaiber B, Bloching U. Effect of storage media on microleakage of five dentin bonding agents Dental Materials 1993;9:191-197.
14. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA: Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002; 88:4-15.
15. Janda R, Roulet JF, Wulf M, Tiller HJ. A new adhesive technology for all-ceramics. Dent Mater 2003;19:567-573.
16. Kamada K, Yoshida K, Atsuta M. Early bond strength and durability of bond between a ceramic material and chemically-cured or dual-cured resin luting agent. Am J Dent 2001;14:85-88.
17. Kern M, Thompson VP. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 1994;71:453-461.
18. Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998;14:64-71.
19. Luthardt RG, Holzhuter M, Sandkuhl O, Herald V, Schnapp JD, Kuhlisch E, Walter M. Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 2002;81:487-491.
20. Matsumura H, Kato H, Atsuta M. Shear bond strength to feldspathic porcelain of two luting cements in combination with three surface treatments. J Prosthet Dent 1997;78:511-517.
21. Ozcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 2003;19:725-731.
22. Piwowarczyk A, P. Ottl, K. Lindemann, H. Zipprich, R. Bender, H.-C. Lauer: Langzeit-Haft-verbund zwischen Befestigungszementen und keramischen Werkstoffen. In Deutsche Zahnärztliche Zeitschrift 2005;60:314-320.
23. Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent Mater 2003;19:603-611.
24. Robin C, Scherrer SS, Wiskott HW, de Rijk WG, Belser UC: Weibull parameters of composite resin bond strengths to porcelain and noble alloy using the Rocatec system. Dent Mater 2002;18:389-395.
25. Spohr AM, Sobrinho LC, Consani S, Sinhoreti MA, Knowles JC. Influence of surface conditions and silane agent on the bond of resin to IPS Empress 2 ceramic. Int J Prosthodont 2003;16:277-282.
26. Stewart GP, Jain P, Hodges J. Shear bond strength of resin cements to both ceramic and dentin. J Prosthet Dent 2002;88:277-284.
27. Strub JR: Metall- und Vollkeramiksysteme in der Kronen-Brücken- Prothetik. Berlin: Quintessenz Verlags-BmbH; 1999.
28. Sun R, Suansuwan N, Kilpatrick N, Swain M. Characterisation of tribochemically assisted bonding of composite resin to porcelain and metal. J Dent 2000;28:441-445.
29. Suttor D, Bunke K, Hoescheler S, Hauptmann H, Hertlein G. LAVA - the system for all-ceramic ZrO2 crown and bridge frameworks. Int J Comput Dent 2001;4:195-206.
30. Toksavul S, Turkun M, Toman M: Esthetic enhancement of ceramic crowns with zirconia dowels and cores: a clinical report. J Prosthet Dent 2004;92:116-119.
31. Van Meerbeck, B., de Munck, J., Yoshida, Y., Inoue, M., Vargas, P., Vijay, P., van Landuyt, K., Lambrechts, P., Vanherle, G.: Adhäsion an Schmelz und Dentin. Aktueller Stand und zukünftige Aufgaben, Teil 1. Ästhetische Zahnmedizin 2004;7,4-16.
32. Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000;2:139-147.