Load partitioning during compressive loading of a Mg/MgB2 composite

Acta Materialia

Volumn 55, Issue 10, 2007, Pages 3467-3478

  Young, M L ^a   DeFouw, J ^a   Almer, J D ^b   Dunand, D C ^a  

^a Northwestern University   (United States)

^b ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

Internal stresses; Metal matrix composites; Superconductors; Synchrotron radiation; X ray diffraction

Indexed keywords

COMPRESSIVE STRESS; ELASTICITY; LATTICE CONSTANTS; MAGNESIUM COMPOUNDS; RESIDUAL STRESSES; SUPERCONDUCTING MATERIALS; SYNCHROTRON RADIATION; X RAY DIFFRACTION;

COMPRESSIVE LOADING; LATTICE STRAIN; PLASTIC LOAD TRANSFER;

METALLIC MATRIX COMPOSITES;

EID: 34247562797     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2007.01.046     Document Type: Article

References (69)

1. Nagamatsu J., Nakagawa N., Muranaka T., Zenitani Y., and Akimitsu J. Nature 410 (2001) 63
2. c superconducting materials foe electric power applications. Nature 414 (2001) 368
3. 2. Nature 410 (2001) 186
4. 2 superconductor. Supercond Sci Technol 14 (2001) L5
5. 2 wires. Nature 411 (2001) 563
6. 2 superconducting tapes. Appl Phys Lett 79 (2001) 230
7. 2 tapes and wires using stainless steel and Cu-Ni tubes. Appl Phys Lett 79 (2001) 2435
8. 2 wires. Supercond Sci Technol 14 (2001) 193
9. 2 wires. Phys Rev Lett 86 (2001) 2423
10. 2 superconducting tapes. Appl Phys Lett 79 (2001) 3116
11. 2/Fe wires with high J(c). Physica C 361 (2001) 149
12. 2 composite wires by the PIT method. Supercond Sci Technol 15 (2002) 12
13. 2 tapes. Appl Phys Lett 82 (2003) 4113
14. 2 fibers within a magnesium matrix. Appl Phys Lett 83 (2003) 120
15. 2 composites. Appl Phys Lett 79 (2001) 4186
16. 2. In: Li J, Jansen M, Brese N, Kanatzidis M, editors. MRS symposium proceedings, vol. 848; 2005. p. FF6.2.1.
17. 2/Mg metal matrix composites. Supercond Sci Technol 19 (2006) 359
18. 2/Mg nanocomposites. Appl Phys Lett 82 (2003) 2103
19. 2 obtained by reactive liquid Mg infiltration. Physica C 433 (2006) 182
20. 2 phases in a Mg alloy matrix composite. Mater Sci Eng A 337 (2002) 222
21. Chawla K.K. Composite materials (1998), Springer, New York
22. Dunand D.C., Mari D., Bourke M.A.M., and Roberts J.A. NiTi and NiTi-TiC composites. 4. Neutron diffraction study of twinning and shape-memory recovery. Metall Mater Trans A 27 (1996) 2820
23. Daymond M.R., Lund C., Bourke M.A.M., and Dunand D.C. Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep. Metall Mater Trans A 30 (1999) 2989
24. Vaidyanathan R., Bourke M.A.M., and Dunand D.C. Phase fraction, texture and strain evolution in superelastic NiTi and NiTi-TiC composites investigated by neutron diffraction. Acta Mater 47 (1999) 3353
25. Hanan J.C., Mahesh S., Ustundag E., Beyerlein I.J., Swift G.A., Clausen B., et al. Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading. Mater Sci Eng A 399 (2005) 33
26. Clausen B., Bourke M.A.M., Brown D.W., and Ustundag E. Load sharing in tungsten fiber reinforced Kanthal composites. Mater Sci Eng A 421 (2006) 9
27. Clausen B., Lee S.Y., Ustundag E., Aydiner C.C., Conner R.D., and Bourke M.A.M. Compressive yielding of tungsten fiber reinforced bulk metallic glass composites. Scripta Mater 49 (2003) 123
28. Wanner A., and Dunand D.C. Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites. Metall Mater Trans A 31 (2000) 2949
29. Maire E., Owen R.A., Buffiere J.-Y., and Withers P.J. A synchrotron X-ray study of a Ti/SiCf composite during in situ straining. Acta Mater 49 (2001) 153
30. Balch D.K., Ustundag E., and Dunand D.C. Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles. Metall Mater Trans A 34 (2003) 1787
31. Balch D.K., and Dunand D.C. Load partitioning in aluminum syntactic foams containing ceramic microspheres. Acta Mater 54 (2006) 1501
32. Young ML, Almer JD, Lienert U, Daymond MR, Haeffner DR, Dunand DC. Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel. Acta Mater 2007; in press, doi:10.1016/j.actamat.2006.11.004.
33. Maire E., Babout L., Buffiere J.-Y., and Fougeres R. Recent results on 3D characterisation of microstructure and damage of metal matrix composites and a metallic foam using X-ray tomography. Mater Sci Eng A 319-321 (2001) 216
34. Cloetens P., Pateyron-Salome M., Buffiere J.-Y., Peix G., Baruchel J., Peyrin F., et al. Observation of microstructure and damage in materials by phase sensitive radiography and tomography. J Appl Phys 81 (1997) 5878
35. Stock S.R. X-ray microtomography of materials. Inter Mater Rev 44 (1999) 141
36. MacDonald S., Preuss M., Maire E., Buffiere J.-Y., Mummery P.M., and Withers P.J. X-ray tomographic imaging of Ti/SiC composites. J Microsc 209 (2003) 102
37. Preuss M., Withers P.J., Maire E., and Buffiere J.-Y. SiC single fibre full-fragmentation during straining in a Ti-6Al-4V matrix studied by synchrotron X-rays. Acta Mater 50 (2002) 3177
38. Blucher J.T. J Mater Process Technol 30 (1992) 381
39. Balch D.K., Ustundag E., and Dunand D.C. Diffraction strain measurements in a partially crystallized bulk metallic glass composite containing ductile particles. J Non-Cryst Solids 317 (2003) 176
40. Wanner A., and Dunand D.C. Methodological aspects of the high energy synchrotron X-ray diffraction technique for internal stress evaluation. J Neutron Res 9 (2001) 495
41. Haeffner D.R., Almer J.D., and Lienert U. The use of high energy X-rays from the Advanced Photon Source to study stresses in materials. Mater Sci Eng A 399 (2005) 120
42. Hanan J.C., Ustundag E., Beyerlein I.J., Swift G.A., Almer J.D., Lienert U., et al. Microscale damage evolution and stress redistribution in Ti-SiC fiber composites. Acta Mater 51 (2003) 4239
43. Cloetens P., Barrett R., Baruchel J., Guigay J.P., and Schlenker M. Phase objects in synchrotron radiation hard X-ray imaging. J Phys D 29 (1996) 133
44. Lee W.-K., Fezzaa K., and Wang J. Metrology of steel micronozzles using X-ray propagation-based phase-enhanced microimaging. Appl Phys Lett (2005) 87
45. Stock S.R., Ignatiev K., Dahl T., Barss J., Fezzaa K., Veis A., et al. Multiple microscopy modalities applied to a sea urchin tooth fragment. J Synchrotron Radiat 10 (2003) 393
46. Stock S.R., Lee W.K., Fezzaa K., Barss J., Dahl T., and Veis A. X-ray absorption microtomography and phase contrast X-radiography of the structure of sea urchin teeth. J Bone Miner Res 16 (2001) S443
47. Noyan I.C., and Cohen J.B. Residual stress: measurement by diffraction and interpretation (1987), Springer, New York
48. Raven C., Snigirev A., Snigireva I., Spanne P., Souvorov A., and Kohn V. Phase-contrast microtomography with coherent high-energy synchrotron X-rays. Appl Phys Lett 69 (1996) 1826
49. Snigirev A., Snigireva I., Kohn V., Kuznetsov S., and Schelokov I. On the possibilities of X-ray phase contrast microimaging by coherent high-energy synchrotron radiation. Rev Sci Instrum 66 (1995) 5486
50. Almer J.D., Lienert U., Peng R.L., Schlauer C., and Oden M. J Appl Phys 94 (2003) 697
51. Korsunsky A.M., Wells K.E., and Withers P.J. Mapping two-dimensional state of strain using synchroton X-ray diffraction. Scripta Mater 39 (1998) 1705
52. Hammersley AP. ESRF97HA02T, FIT2D: An introduction and overview. ESRF internal report; 1997.
53. Hammersley AP. ESRF98HA01T, FIT2D V9.129 reference manual V3.1. ESRF internal report; 1998.
54. He BB, Smith KL. In: SEM spring conference on experimental and applied mechanics and experimental/numerical mechanics in electronic packaging III, Houston, TX; 1998.
55. In: Cubberly W.H. (Ed). Metals handbook vol. 2 (1990), ASM International, Materials Park (OH)
56. Callister W.D. Materials science and engineering (2003), Wiley, New York
57. In: Schneider S.J. (Ed). Engineering materials handbook: ceramics and glasses (1991), ASM International, Materials Park (OH)
58. Nesterenko V.F., and Gu Y. Appl Phys Lett 82 (2003) 4104
59. Wanner A. Elastic modulus measurements of extremely porous ceramic materials by ultrasonic phase spectroscopy. Mater Sci Eng A 248 (1998) 35
60. Budinanski B., and O'Connel R.J. Int J Solids Struct 12 (1976) 81
61. Kachanov M. On the effective moduli of solids with cavities and cracks. Int J Fract 59 (1993) R17
62. Ramakrishnan N., and Arunachalam V.S. Effective elastic moduli of porous solids. J Mater Sci 25 (1990) 3930
63. Clyne T.W., and Withers P.J. An introduction to metal matrix composites (1993), Cambridge University Press, Cambridge
64. 2. J Mater Sci Lett 22 (2003) 1069
65. 2 versus temperature and pressure. Phys Rev B (2001) 63
66. Sinclair R., Preuss M., Maire E., Buffiere J.-Y., Bowen P., and Withers P.J. The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites. Acta Mater 52 (2004) 1423
67. Agnew S.R., and Duygulu O. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. Int J Plasticity 21 (2005) 1161
68. Brown D.W., Agnew S.R., Bourke M.A.M., Holden T.M., Vogel S.C., and Tome C.N. Internal strain and texture evolution during deformation twinning in magnesium. Mater Sci Eng A 399 (2005) 1
69. Roberts C.S. Magnesium and its alloys (1960), Wiley, New York