Heterogeneous object modeling: A review

CAD Computer Aided Design

Volumn 39, Issue 4, 2007, Pages 284-301

  Kou, X Y ^a   Tan, S T ^a  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

FGM; Functionally graded; Heterogeneous object modeling; Representation; Review

Indexed keywords

COMPOSITE MATERIALS; COMPUTER AIDED DESIGN; MATHEMATICAL MODELS; PROBLEM SOLVING;

COMPOSITE MODELS; HETEROGENEOUS OBJECT MODELING; OBJECT REPRESENTATIONS;

FUNCTIONALLY GRADED MATERIALS;

EID: 34147108177     PISSN: 00104485     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cad.2006.12.007     Document Type: Short Survey

References (104)

1. Kumar V., Burns D., Dutta D., and Hoffmann C. A framework for object modeling. Computer-Aided Design 31 (1999) 541
2. Markworth A.J., Ramesh K.S., and Parks W.P. Modelling studies applied to functionally graded materials. Journal of Materials Science 30 (1995) 2183
3. Wang M.Y., and Wang X. A level-set based variational method for design and optimization of heterogeneous objects. Computer-Aided Design 37 (2005) 321
4. Ivar E.R. Functionally graded materials. In: James K.W. (Ed). Handbook of advanced materials (2004) 465-486
5. Watari F., and Kondo H. Development of functionally graded implant and dental post for bio-medical application. Functionally graded materials VII (Proc. 7th int. symposium on functionally graded materials). Materials science forum vol. 423-425 (2002) 321
6. Shackelford J.F. Bioceramics: Applications of ceramic and glass materials in medicine (1999), Trans Tech Publications Ltd.
7. Li JF, Watanabe R, Nishio N, Kawasaki A. Design and fabrication of diamond tools with ceramic shank using the concept of functionally gradient materials. In: Proceedings of 1994 powder metallurgy world congress, vol. 1. 1994. p. 553-6
8. Cline C. Preparation and properties of gradient titanium carbide cermet cutting tools. Metal powder report, vol. 52. USA: Lawrence Livermore National Laboratory; 1997. p. 39-39(1)
9. Drašar Č., Mrotzek A., Stiewe C., Müller E., and Kaysser W.A. Developing mechanically and chemically stable contacts between Bi2Te3 and FeSi2. Functionally graded materials VII. Materials science forum vol. 423-425 (2002) 391-398
10. Liu Y., and Meletis E.I. Tribological behavior of DLC coatings with functionally gradient interfaces. Surface and Coatings Technology 153 (2002) 178-183
11. Huang J. Heterogeneous component modeling and optimal design for manufacturing. Ph.D. dissertation. Clemson (SC): Department of Mechanical Engineering, Clemson University; 2000
12. Qian X., and Dutta D. Physics-based modeling for heterogeneous objects. Journal of Mechanical Design 125 (2003) 416-427
13. Liu H. Algorithms for design and interrogation of functionally graded material solids. S.M. thesis. Massachusetts Institute of Technology; 2000
14. Jackson TR. Analysis of functionally graded material object representation methods. Ph.D. thesis. Massachusetts Institute of Technology; 2000
15. Qian XP. Feature methodologies for heterogeneous object realization. Ph.D. thesis. University of Michigan; 2001
16. Shin K-H. Representation and process planning for layered manufacturing of heterogeneous objects. Ph.D. thesis. University of Michigan; 2002
17. Siu YK. Modeling and prototyping of heterogeneous solid CAD models. Ph.D. thesis. The University of Hong Kong; 2003
18. Kou XY. Computer-aided design of heterogeneous objects. Ph.D. thesis. The University of Hong Kong; 2006
19. Kou X.Y., and Tan S.T. A hierarchical representation for heterogeneous object modeling. Computer-Aided Design 37 (2005) 307
20. Pasko A., Adzhiev V., Schmitt B., and Schlick C. Constructive hypervolume modeling. Graphical Models 63 (2001) 413
21. Natekar D., Zhang X., and Subbarayan G. Constructive solid analysis: A hierarchical, geometry-based meshless analysis procedure for integrated design and analysis. Computer-Aided Design 36 (2004) 473
22. Qian X., and Dutta D. Design of heterogeneous turbine blade. Computer-Aided Design 35 (2003) 319
23. Samanta K., and Koc B. Feature-based design and material blending for free-form heterogeneous object modeling. Computer-Aided Design 37 (2005) 287
24. Qian X., and Dutta D. Feature-based design for heterogeneous objects. Computer-Aided Design 36 (2004) 1263
25. Biswas A., Shapiro V., and Tsukanov I. Heterogeneous material modeling with distance fields. Computer Aided Geometric Design 21 (2004) 215-242
26. Choi S.H., and Cheung H.H. A multi-material virtual prototyping system. Computer-Aided Design 37 (2005) 123
27. Chen K.-Z., and Feng X.-A. CAD modeling for the components made of multi heterogeneous materials and smart materials. Computer-Aided Design 36 (2004) 51
28. Cho JR. Optimum material composition design for thermal stress reduction in FGM lathe bit. Composites Part A: Applied Science and Manufacturing 2006;37:1568-77 [in press]
29. Cho J.R., and Shin S.W. Material composition optimization for heat-resisting FGMs by artificial neural network. Composites Part A: Applied Science and Manufacturing 35 (2004) 585-594
30. Elishakoff I., Gentilini C., and Viola E. Three-dimensional analysis of an all-round clamped plate made of functionally graded materials. Acta Mechanica 180 (2005) 21-36
31. Eraslan A., and Akis T. On the plane strain and plane stress solutions of functionally graded rotating solid shaft and solid disk problems. Acta Mechanica 181 (2006) 43-63
32. Huang J., Venkataraman S., Rapoff A.J., and Haftka R.T. Optimization of axisymmetric elastic modulus distributions around a hole for increased strength. Structural and Multidisciplinary Optimization 25 (2003) 225-236
33. Nemat-Alla M. Reduction of thermal stresses by developing two-dimensional functionally graded materials. International Journal of Solids and Structures 40 (2003) 7339-7356
34. Liu H., Maekawa T., Patrikalakis N.M., Sachs E.M., and Cho W. Methods for feature-based design of heterogeneous solids. Computer-Aided Design 36 (2004) 1141
35. Hua J, He Y, Qin H. Multiresolution heterogeneous solid modeling and visualization using trivariate simplex splines. In: Proceedings of the ninth ACM symposium on solid modeling and applications. 2004. p. 47
36. Adzhiev V, Kartasheva E. Cellular-functional modeling of heterogeneous objects. In: Proceedings of the seventh ACM symposium on solid modeling and applications. 2002
37. Kartasheva E, Adzhiev V, Pasko A, Fryazinov O, Gasilov V. Discretization of functionally based heterogeneous objects. In: ACM symposium on solid modeling and applications, proceedings of the eighth ACM symposium on solid modeling and applications. 2003. p. 145-56
38. Kumar V, Dutta D. An approach to modeling heterogeneous objects. In: Proceedings of the solid freeform fabrication symposium. 1997. p. 336
39. Hu Y, Blouin VY, Fadel GM. Design for manufacturing of 3D heterogeneous objects with processing time considerations. In: Proceedings of ASME 2005 design engineering technical conferences. 2005
40. Qiu D, Langrana N, Danforth SC, Safari A, Jafari M. Development of multi-material virtual layered manufacturing simulation. In: Proceedings of third Pacific rim international conference on advanced naterials and processing. 1998
41. Cho W, Sachs EM, Patrikalakis NM, Cima M, Liu H, Serdy J, et al. Local composition control in solid freeform fabrication. In: Proceedings of the 2002 NSF design, service and manufacturing grantees and research conference. 2002
42. Jackson TR, Patrikalakis NM, Sachs EM, Cima MJ. Modeling and designing components with locally controlled composition. In: Solid freeform fabrication proceedings. 1998. p. 259
43. Martin W, Cohen E. Representation and extraction of volumetric attributes using trivariate splines: A mathematical framework. In: Proceedings of the sixth ACM symposium on solid modeling and applications. 2001. p. 234
44. Dutta DB, Jurrens D, Lyons KK, Pratt M, Sriram RD. Representation of heterogeneous objects in ISO 10303 (STEP). In: Proceedings of the ASME conference. 2000
45. Park S-M, Crawford RH, Beaman JJ. Volumetric multi-texturing for functionally gradient material representation. In: Proceedings of the sixth ACM symposium on solid modeling and applications. 2001
46. Kou XY, Tan ST. An interactive CAD environment for heterogeneous object design. In: Proceedings of ASME 2004 design engineering technical conferences. 2004
47. Kou XY, Tan ST, Sze WS. Relation oriented modeling for heterogeneous object design. In: Proceedings of ASME 2005 design engineering technical conferences. 2005
48. Miyamoto Y. Functionally graded materials: Design, processing, and applications (1999), Kluwer Academic Publishers, Boston
49. Ghosh A., and American Ceramic Society. Meeting, Functionally graded materials: Manufacture, properties, and applications (1997), American Ceramic Society, Westerville (OH)
50. Suresh S., and Mortensen A. Fundamentals of functionally graded materials: Processing and thermomechanical behaviour of graded metals and metal-ceramic composites (1998), IOM Communications Ltd, London
51. Shapiro V. Solid modeling. In: Farin G.E., Hoschek J., and Kim M.-S. (Eds). Handbook of computer aided geometric design. 1st ed. (2002), Elsevier, Amsterdam 473-518
52. Siu Y.K., and Tan S.T. Source-based heterogeneous solid modeling. Computer-Aided Design 34 (2002) 41
53. Cho J.R., and Ha D.Y. Optimal tailoring of 2D volume-fraction distributions for heat-resisting functionally graded materials using FDM. Computer Methods in Applied Mechanics and Engineering 191 (2002) 3195-3211
54. Reiter T., Dvorak G.J., and Tvergaard V. Micromechanical models for graded composite materials. Journal of the Mechanics and Physics of Solids 45 (1997) 1281-1302
55. Christensen R.M. Mechanics of composite materials (1979), Wiley/Interscience, New York
56. Qian X., and Dutta D. Heterogeneous object modeling through direct face neighborhood alteration. Computers & Graphics 27 (2003) 943
57. Adzhiev V., Kartasheva E., Kunii T., Pasko A., and Schmitt B. Hybrid cellular-functional modeling of heterogeneous objects. Journal of Computing and Information Science in Engineering 2 (2002) 312
58. Shin K.-H., and Dutta D. Constructive representation of heterogeneous objects. Journal of Computing and Information Science in Engineering 1 (2001) 205
59. Zhang X.-J., Chen K.-Z., and Feng X.-A. Optimization of material properties needed for material design of components made of multi-heterogeneous materials. Materials & Design 25 (2004) 369-378
60. Requicha A.A.G., and Voelcker H.B. Solid modeling - A historical summary and contemporary assessment. IEEE Computer Graphics and Applications 2 (1982) 9-16 18-20; 22-4
61. Requicha A.G. Representations for rigid solids: Theory, methods, and systems. ACM Computing Surveys 12 (1980) 437-464
62. Steenrod N.E. The topology of fibre bundles (1974), Princeton University Press, Princeton (NJ)
63. Arbab F. Set models and Boolean operations for solids and assemblies. IEEE Computer Graphics and Applications 10 (1990) 76
64. Weiler K. The radial-edge structure: A topological representation for non-manifold geometric boundary representations. Geometric modelling for CAD applications (1988), North Holland 3-36
65. Weiler KJ. Topological structures for geometric modeling. Ph.D. thesis. Rensselaer Polytechnic Institute; 1986
66. Keen AA. A non-manifold shape representation. Ph.D. thesis. Texas A&M University; 1993
67. Rossignac J.R., and O'Connor M.A. SGC: A dimension-independent model for pointsets with internal structures and incomplete boundaries. Geometric modeling for product engineering (Proceedings of the IFIP workshop on CAD/CAM) (1989) 145-180
68. Rossignac J.R., and Requicha A.A.G. Constructive non-regularized geometry. Computer-Aided Design 23 (1991) 21-32
69. Cavalcanti P.R., Carvalho P.C.P., and Martha L.F. Non-manifold modelling: An approach based on spatial subdivision. Computer-Aided Design 29 (1997) 209
70. Chen M., and Tucker J.V. Constructive volume geometry. Computer Graphics Forum 19 (2000) 281-293
71. Jackson T.R., Cho W., and Sachs E.M. Memory analysis of solid model representations for heterogeneous objects. Journal of Computing and Information Science in Engineering 2 (2002) 1
72. Chandru V., Manohar S., and Prakash C.E. Voxel-based modeling for layered manufacturing. Computer Graphics and Applications, IEEE 15 (1995) 42
73. Chen M., Kaufman A., and Yagel R. Volume graphics (2000), Springer, London
74. Lorensen E., and Cline E. Marching cubes: A high resolution 3D surface construction algorithm (1987), ACM Press
75. Hu Y, Blouin VY, Fadel GM. Design for manufacturing of 3D heterogeneous objects with processing time considerations. In: Proceedings of ASME 2005 design engineering technical conferences. 2005
76. Zhu F. Visualized CAD modeling and layered manufacturing modeling for components made of a multiphase perfect material. M.Phil. thesis. The University of Hong Kong; 2004
77. Huang J., Fadel G.M., Blouin V.Y., and Grujicic M. Bi-objective optimization design of functionally gradient materials. Materials & Design 23 (2002) 657-666
78. Yang J., Liew K.M., Wu Y.F., and Kitipornchai S. Thermo-mechanical post-buckling of FGM cylindrical panels with temperature-dependent properties. International Journal of Solids and Structures 43 (2006) 307-324
79. Praveen G.N., and Reddy J.N. Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. International Journal of Solids and Structures 35 (1998) 4457-4476
80. Shepard D. A two-dimensional interpolation function for irregularly-spaced data. Proceedings of the 1968 23rd ACM national conference (1968), ACM Press
81. Rvachev V.L., Sheiko T.I., Shapiro V., and Tsukanov I. Transfinite interpolation over implicitly defined sets. Computer Aided Geometric Design 18 (2001) 195-220
82. Shapiro V. Theory of R-functions and applications: A primer. Technical report. Cornell University; 1988
83. Rvachev V.L. Theory of R-functions and some applications (1982), Naukova Dumka
84. Kou X.Y., Tan S.T., and Sze W.S. Modeling complex heterogeneous objects with non-manifold heterogeneous cells. Computer-Aided Design 38 (2006) 457-474
85. Bhashyam S., Shin K.H., and Dutta D. An integrated CAD system for design of heterogeneous objects. Rapid Prototyping Journal 6 (2000) 119-135
86. http://www.abaqus.com/
87. Kou XY, Tan ST. A systematic approach for integrated computer-aided design and finite element analysis of functionally-graded-material objects. Materials & Design [in press]. Corrected proof, Available online 18 December 2006
88. http://www.comsol.com/
89. Valery A., Elena K., Tosiyasu K., Alexander P., and Benjamin S. Hybrid cellular-functional modeling of heterogeneous objects. Journal of Computing and Information Science in Engineering 2 (2002) 312-322
90. Shin K.-H., Natu H., Dutta D., and Mazumder J. A method for the design and fabrication of heterogeneous objects. Materials & Design 24 (2003) 339-353
91. Pasko A., Adzhiev V., Sourin A., and Savchenko V. Function representation in geometric modeling: Concepts, implementation and applications. The Visual Computer 11 (1995) 429-446
92. Cheng J., and Lin F. Approach of heterogeneous bio-modeling based on material features. Computer-Aided Design 37 (2005) 1115
93. Kumar V., and Dutta D. Approach to modeling & representation of heterogeneous objects. Journal of Mechanical Design, Transactions of the ASME 120 (1998) 659-667
94. Sun W., and Hu X. Reasoning Boolean operation based modeling for heterogeneous objects. Computer-Aided Design 34 (2002) 481
95. Muller-Karger C.M., Rank E., and Cerrolaza M. p-version of the finite-element method for highly heterogeneous simulation of human bone. Finite Elements in Analysis and Design 40 (2004) 757-770
96. Yi H.C., Guigné J.Y., Manerbino A.R., Robinson L.A., Ma J., and Moore J.J. Modeling and fabrication of functionally graded materials by the combustion synthesis technique (2002) p. 239-44
97. Bidarra R., de Kraker K.J., and Bronsvoort W.F. Representation and management of feature information in a cellular model. Computer-Aided Design 30 (1998) 301
98. Shah J.J. Parametric and feature-based CAD/CAM: Concepts, techniques, and applications (1995), Wiley, New York
99. Langer R., and Vacanti J. Tissue engineering. Science 260 (1993) 920-926
100. http://www.ugs.com/products/open/parasolid
101. http://www.spatial.com/components/
102. Deutsch A. Cellular automaton modeling of biological pattern formation: Characterization, applications, and analysis (2005), Birkhäuser, Boston (Basel)
103. Langer R. Drug delivery and targeting. Nature 392 (1998) 5-10
104. Fan L.T., and Singh S.K. Controlled release: A quantitative treatment (1989), Springer-Verlag, New York