Memory analysis of solid model representations for heterogeneous objects

Journal of Computing and Information Science in Engineering

Volumn 2, Issue 1, 2002, Pages 1-10

  Jackson, T R ^a   Cho, W ^b   Patrikalakis, N M ^b   Sachs, E M ^b  

^a CHARLES STARK DRAPER LABORATORY   (United States)

^b MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Functionally Graded Materials (FGM); Heterogeneous objects; Local Composition Control (LCC); Optimal Data Structure; Solid Freeform Fabrication (SFF); Storage Cost Analysis

Indexed keywords

EID: 33144481582     PISSN: 15309827     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1476380     Document Type: Article

References (77)

1. Lebbon, C., and McDonagh-Philp, D. C., 2000, “Exploring the Emotional Relationship between Users and Products; Designing for the 21st Century II: An International Conference on Universal Design,” Ostroff, E. (ed), Adaptive Environments Center, Boston, USA, Rhode Island, USA, (http://www.adaptenv.org/21century/proceedings4.asp)
2. Gotzsch, J., 1999, Design Orientation in New Product Development, in B. Jerrard, R. Newport, and M. Trueman, Managing New Product Innovation, Taylor & Francis, London.
3. FIORES, Formalization and Integration of an Optimized Reverse Engineering Styling Workflow, Brite Euram-Project n. BE96-3579, URL: http://www.fiores.com
4. FIORES II, Character Preservation and Modelling in Aesthetic and Engineering Design, GROWTH Project n. G1RD-CT-2000-00037
5. Moltenbrey, K., 1999, One for the Road, Computer Graphics World.
6. Rowell, A., 1998, “Inizia l’era dei veicoli virtuali,” CG Computer Gazette, year XIII, n° 5, may, edit. IHT, pp. 34-37
7. Yamada, Y., 1997, “Clay Modeling: Techniques for Giving Three-dimensional Form to Idea,” Car Styling Extra Issue 93(112), San’ei Shobo Publishing Co.
8. INSTANCE, Innovative Styling Applications in Computer-aided Environments, Brite Euram III Project n. BRPR950042
9. Wang, S., and Kaufman, A. E., 1995, “Volume Sculpting,” Symposium on Interactive 3D Graphics.
10. Paternack, A., 1999, “Shapes of Come,” Computer Graphics World.
11. Higashi, M., 1990, “On Formulation and Display for Visualizing Features and Evaluating Quality of Free-form Surfaces,” Proceedings of Eurographics, pp. 299-309.
12. Hagen, H., Hahmann, S., and Schreiber, T., 1995, “Visualization and Computation of Curvature Behavior of Free Form Curves and Surfaces,” Comput.- Aided Des., 27(7), pp. 545-552.
13. Hoschek, J., and Kaklis, P., 1996, Advanced Course on FAIRSHAPE, Eds., B. G. Teubner Stuttgart, ISBN 3-519-02634-1.
14. Novacki, H., and Kaklis, P. D., 1998, Creating Fair and Shape-Preserving Curves and Surfaces, Eds. B. G. Teuner Stuttgart, ISBN 3-519-02636-8.
15. Sapidis, N., and Koras, G., 1997, “Visualization of Curvature Plots and Evaluation of Fairness: An Analysis of the Effect of Scaling,” Computer Aided Geometric Design, 14, pp. 299-311.
16. Wolters, H. J., and Farin, G., 1997, “Geometric Curve Approximation,” Computer Aided Geometric Design, 14, pp. 499-513.
17. Kobbelt, L., Botsch, M., Kähler, K., Rössl, C., Scneider, R., and Vorsatz, J., “Geometric Modelling Based on Polygon Meshes,” Proceedings of Eurographics 2000, Tutorial T4.
18. Tovey, M., 1992, “Intuitive and Objective Processes in Automotive Design,” Design Studies, 13(1), pp. 22-41.
19. Evans, B., and Salinas, R., 1999, “Effective Use of Industrial Design in Rapid Product Development,” MD&DI magazine.
20. URL: http://www.sasig-pdq.org/sasig/other-links-quality.html
21. Luh, D. B., 1994, “The Development of Psycological Indexes for Product Design and the Concepts for Product Phases,” Design Management Journal, Winter, 5(1), pp. 30-39.
22. Wallace, D. R., and Jakiela, M. J., 1993, “Automated Product Concept Design: Unifying Aesthetics and Engineering,” IEEE Comput. Graphics Appl., 13, pp. 66-75.
23. van Bremen, E. J. J., Knoop, W. G., Horvath, I., Vergeest, J. S. M., and Pham, B., “Developing a Methodology for Design for Aesthetics Based on Analogy of Communication,” Proc. Of the 1998 ASME Design Engineering Technical Conferences, September 1998, Atlanta, Georgia, USA.
24. Hsiao, S. W., and Wang, H. P., 1998, “Applying the Semantic Transformation Method to Product Design,” Design Studies, 19(3), Elsevier Science Ltd, London.
25. Yoshimura, M., and Yanagi, H., 1998, “Concurrent Design Implementing Aesthetic Factors,” Proc. Of the 1998 ASME Design Engineering Technical Conferences, Atlanta, Georgia, USA, paper No. DETC98/DAC-5800.
26. Chen, K., and Owen, C. L., 1998, “A Study of Computer Supported Formal Design,” Design Studies, 19(3), Elsevier Science Ltd, London.
27. Smyth, S. N., and Wallace, D. R., 2000, “Towards The Synthesis of Aesthetic Product Form,” Proc. Of DETC’00, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conference Baltimore, Maryland, DETC2000/DTM-14554.
28. van Bremen, E. J. J., Sudijone, S., Horvath, I., 1999, “A Contribution to Finding the Relationship Between Shape Characteristics and Aesthetic Appreciation of Selected Products,” ICED99, Munich, pp. 1765-1768.
29. McDonagh-Philip, D., 1999, “User Evaluation Techniques Applied to Small Domestic Appliances: A Pilot Study,” ICED99, Munich, pp. 1525-1530.
30. Ishihara, S., Tsuchiya, K., Nagamachi, M., and Matsubara, Y., “Neural Networks Approach to Kansei Analysis on Canned Coffee Design,” Conference on Ergonomics, Tampere, 1997.
31. Stahl, A., 2001, “Learning Feature Weights by Using Case Order Feedback,” Case-Based Reasoning Research and Development, Aha, D. W., Watson, I. & Yang, Q. (Eds.), Proc. Of the 4th. International Conference on Case-Based Reasoning, ICCBR-2001, Springer, Lecture Notes in Artificial Intelligence.
32. Terzopolus, D., and Fleischer, K., 1988, “Deformable Models,” Visual Computer, 4(6), pp. 306-331.
33. Qin, H., 1996, “Physics Based Geometric Design,” International Journal of Shape Modelling, 2(23), pp. 139-188.
34. Xie, H., and Qin, H., 2001, “Automatic Knot Determination of NURBS for Interactive Geometric Design,” Proc. Shape Modeling an Applications, Genova, Italy, pp. 267-275.
35. Sanchez-Reyes, J., 1997, “A Simple Technique for NURBS Shape Modification,” IEEE Comput. Graphics Appl., 17, pp. 52-29.
36. Tai, C., and Loe, K., 1999, “Alpha-spline: A C2 Continuous Spline with Weights and Tension Control,” Proc. Of Shape Modeling and Applications, Aizu-Wakamatsu, Japan, pp. 138-145.
37. Fong, P., and Seidel, H. P., 1993, “An Implementation of Triangular B-spline Surfaces Over Arbitrary Triangulation,” Computer Aided Geometric Design, 3-4(10), pp. 267-275.
38. Greiner, G., and Seidel, H. P., 1994, “Modeling with Triangular B-splines,” IEEE Comput. Graphics Appl., 14(2), pp. 56-60.
39. Qin, H., and Terzopoulos, D., 1997, “Triangular NURBS and Their Dynamic Generalizations,” Computer Aided Geometric Design, 14, pp. 325-347.
40. Zorin, D., and Schröder, P., 2000, “Subdivision for Modelling and Animation,” Eds. Course Notes ACM SIGGRAPH.
41. Catmull, E., and Clark, J., 1978, “Recursively Generated B-spline Surfaces on Arbitrary Topological Meshes,” Comput.-Aided Des., 10(10), pp. 350-355.
42. Doo, D., and Sabin, M., 1978, “Analysis of the Behavior of Recursive Subdivision near Extraordinary Points,” Comput.-Aided Des., 10(6), pp. 356-360.
43. Loop, C. T., “Smooth Subdivision Surfaces Based on Triangles,” Master’s thesis, University of Utah, Department of Mathematics, 1987.
44. Stamm, J., “Exact Evaluation of Catmull-Clark Subdivision Surfaces at Arbitrary Parameter Values,” Proceedings of SIGGRAPH 98, pp. 395-404.
45. Zorin, D., Schroder, P., and Sweldens, W., 1996, “Interpolating Subdivision for Meshes with Arbitrary Topology,” Tech. Rep. CS-TR-96-06, Caltech, Department of Computer Science.
46. Dyn, N., Gregory, J. A., and Levin, D., 1990, “A Butterfly Subdivision Schemes for Surface Interpolation with Tension Control,” ACM Trans. Graphics, 9(2), pp. 160-169.
47. Halstead, M., Kass, M., DeRose, T., 1993, “Efficient, Fair Interpolation Using Catmull-Clark Surface,” Proceedings of SIGGRAPH 93, Annual conference Series, ACM SIGGRAPH, pp. 35-44.
48. Levin, A., 2000, “Surface Design Using Locally Interpolating Subdivision Schemes,” J. Approx. Theory, 104(1), pp. 98-120.
49. Claes, J., Beets, K., van Reeth, F., Iones, A., and Krupkin, A., 2001, “Turning the Approximating Catmull-Clark Subdivision Scheme Into a Locally Interpolating Surface Modelling Tool,” Proc. Shape Modeling and Applications, Genova, Italy, pp. 42-48.
50. Biermann, H., Levin, A., and Zorin, D., 2000, “Piecewise Smooth Subdivision Surfaces with Normal Control,” Computer Graphics Proceedings SIGGRAPH, pp. 113-120
51. Nasri, A. H., Kim, T., and Lee, K., 2001, “Fairing Recursive Subdivision Surfaces With Curve Interpolation Constraints,” Proc. Shape Modeling and Applications, Genova, Italy, pp. 49-55.
52. Khodakovsky, A., and Schroder, P., 1999, “Fine Level Feature Editing for Subdivision Surfaces,” Proc. ACM Solid Modeling 99, pp. 203-211.
53. Litke, N., Levin, A., and Schroder, P., 2001, “Trimming for Subdivision Surfaces,” Computer Aided Geometric Design, 18(5), pp. 463-481.
54. Krause, F. L., Luddemann, J., and Rieger, E., 1995, 1996, “Feature-Based Modelling of Conceptual Requirements for Styling,” Proceedings IFIP WG 5.3, Life Cycle Modelling for Innovative Products and Processes, Berlin Nov./Dec., F. L. Krause and H. Jansen (Edts), London, Chap-man Hall.
55. Cavendish, J. C., and Marin, S. P., 1992, “Feature Based Surface Design and Machining,” Proc. IEEE Computer and Graphics and Applications, pp. 61-68.
56. Cavendish, J. C., and Marin, S. P., 1992, A Procedural Approach Featurebased Approach for Designing Functional Surfaces, Topics in Surface modeling, ed. H. Hagen, Geometric Design Publications. Philadelphia, pp. 145-168.
57. van Elsas, P. A., and Vergeest, J. S. M., 1998, “Displacement Feature Modelling for Conceptual Design,” Comput.-Aided Des., 30(1), pp. 19-27.
58. Fontana, M., Giannini, F., and Meirana, M., 1999, “A Free Form Feature Taxonomy,” Computer Graphics Forum, 18(3), pp. 107-118.
59. Vergeest, J. S. M., Horvàth, I., and Spanjaard, S. “Parameterization of Free form Features,” Proc. Of Shape Modelling Applications 2001, Genova, Italy, pp. 20-29.
60. Vergeest, J. S. M., Horvàth, I., Jelier, J., and Rusàk, Z., “Free Form Surface Copy and Paste Techniques for Shape Synthesis,” I. Horvàth, A. J. Medland and J. S. M. Vergeest (Eds.), Proc. TMCE2000, Delft, pp. 373-382.
61. Au, C. K., Yuen, M. M. F., 2000, “A Semantic Feature Language for Sculptured Object Modeling,” Computer-Aided Design, 32, pp. 63-74.
62. Vosniakos, G., 1999, “Investigation of Feature-based Shape Modelling for Mechanical Parts with Free Form Surfaces,” Int. J. Adv. Manuf. Technol, 15, pp. 188-199.
63. Gindy, N. N. Z., 1989, “A Hierarchical Structure for Form Feature,” Int. Journal of Production Research, 27, pp. 89-103.
64. Mitchell, S. R., Jones, R., and Newman, S. T., 1995, “A Structured Approach to the Design of Shoe Lasts,” J. Eng. Des., 6(2), pp. 49-66.
65. Mitchell, S. R., Jones, R., and Newman, S. T., 1995, “An Initial Data Model, Using Object Oriented Paradigm for Sculptured-feature-based Design,” Res. Eng. Des., 7, pp. 19-37.
66. Higashi, M., 1990, “On Formulation and Display for Visualizing Features and Evaluating Quality of Free-form Surfaces,” Proc. Of Eurographics, 90, pp. 299-309.
67. Chen, Y., Beier, K., and Papageorgiou, D., 1997, “Direct Highlight Line Modification on Nurbs Surfaces,” Computer-Aided Geometric Design, 14, pp. 583-601.
68. Zhang, C., and Cheng, F., 1998, “Removing Local Irregularities of NURBS Surfaces by Modifying Highlight Lines,” Comput.-Aided Des., 30(12), pp. 923-930.
69. Andersson, R., 1996, “Surface Design Based on Brightness Intensity or Isophotes-theory and Practice,” Advanced Course on FAIRSHAPE, J. Hoschek, P. Kaklis Eds. B. G. Teubner Stuttgart, ISBN 3-519-02634-1, pp. 131-144.
70. Loos, J., Greiner, G., and Seidel, H., 1999, “Modeling of Surfaces with Fair Reflection Line Pattern,” Proc. Of Shape Modeling and Applications, Aizu- Wakamatsu, Japan, March, pp. 256-263.
71. Podhel, G., “How Designers See Curvature Properties,” University of Kaiserlautern, RKK Internal Report RIR-2001-02.
72. Birkhoff, G. D., 1933, Aesthetic Measure, Harvard Univ. Press, Cambridge, MA.
73. Jones, J. I., 1970, “A System for Designing and Approximating Aesthetically Smooth Curves with Interactive Graphic Controls,” Ph.D. Dissertation, University of Detroit.
74. Burchard, H. G., Ayers, J. A., Frey, W. H. And Sapidis, N. S. 1994, “Approximation with Aesthetic Constraints,” in: Sapidis, N. S. (Ed.), Designing Fair Curves and Surfaces, Society for Industrial and Applied Mathematics (SIAM), Philadelphia, Chap. 1, pp. 3-28.
75. Higashi, M., Tsutamori, H., and Hosaka, M., “Generation of Smooth Surfaces by Controlling Curvature Variation,” Eurographics 96, J. Rossignac, F. Sillon, Blackwell Publisher, 15, No. 3187-3196.
76. Anderson, R. E., 1993, “Surface with Prescribed Curvature,” Computer Aided Geometric Design, 10, pp. 431-452.
77. Frey, W. H., Field, D. A., 2000, “Designing Be´zier Conic Segments With Monotone Curvature,” Computer Aided Geometric Design, 17, pp. 457-483.